AUDIO ARRAY AM-C1 USB Condenser Microphone Kit
Product Diagram
- Microphone Stand
- Table Clamp
- POP Filter
- Microphone
- Shock Mount
- USB Cable
- Mic Windscreen
- Cable Tie
- Tripod with Clip
Installation
- Step 1, check the accessory list.
- Step 2, fix the clamp on the edge of the table.
- Step 3, insert the foot base (black) of the adjustable microphone stand into the the table clamp.
- Step 4, tighten the screw.
- Step 5, Screw the shock mount onto the threaded end of the adjustable microphone stand.
- Step 6, insert the microphone into the microphone clip.
- Step 7, fix the pop filter on the adjustable microphone stand to complete the assembly.
- Step 8, connect the microphone with your computer, and prepare wired headphones to hear the voices from the microphone.
Specifications
| Polar Pattern | Cardioid |
| Sensitivity | -28dB±3dB （1kHz 0dB=1V/Pa） |
| Frequency Response | 20Hz-20KHz |
| Impedance | 150 (1 |
| S/N Ratio | 78 dB |
| Max SPL | 130 d |
| Sampling Rate | 192KHZ/24Bit |
What’s in the Box
| 1 x USB Condenser Microphone | 1 x Microphone Stand |
| 1 x Windscreen | 1× USB Cable |
| 1 x Table Clamp | 1× Shock Mount |
| 1 x Pop Filter | 1× Tripod with Clip |
| 1× 3/8”to5/8”Adapter | 4× Cable Tie |
| 1 x User Guide | 1 ×USB Adapter |
FOLLOW US
- support@audioarray.in.
- audioarray.in.
- /c/AudioArray.
- @audioarray.in.
- @audioarray.in.
- @audio_array
Documents / Resources
 |
AUDIO ARRAY AM-C1 USB Condenser Microphone Kit [pdf] Instruction Manual AM-C1 USB Condenser Microphone Kit, AM-C1, USB Condenser Microphone Kit, Condenser Microphone Kit, Microphone Kit, Kit |
