AT9027 Low Profile 10W LED Dimmable Flush Downlight

Specifications:

  • Product: AT9027 TRI
  • Power: 10W
  • Design: Low Profile LED Flush Downlight
  • Driver: Dimmable Tri-CCT selectable
  • Material: Aluminium body, PMMA diffuser
  • Finish: Powdercoated
  • Color: White
  • IC Rating: IC-4
  • IP Rating: IP54 Front Face Only
  • Input Voltage: 230Vac
  • Luminous Flux:
    • Warm White (3000K): 1050 lm
    • Cool White (4000K): 1150 lm
    • Daylight (5700K): 1100 lm
  • LED Lifetime: >54,000 hrs
  • Warranty: 3 years RTB for domestic use, VIP Warranty
    available
  • Dimensions:
    • Cutout: 90-95 mm
    • Diameter: 110 mm
    • Height: 27 mm

Product Usage Instructions:

Installation:

  1. Ensure the power supply is switched off before
    installation.
  2. Make a cutout according to the specified dimensions.
  3. Connect the wiring following the provided instructions.
  4. Secure the downlight into the ceiling using appropriate
    fixtures.

Dimming:

To dim the light output, ensure you have a compatible phase-cut
dimmer switch installed. Adjust the dimmer to achieve the desired
brightness level.

Maintenance:

Regularly clean the diffuser and body of the downlight with a
soft, dry cloth to maintain optimal performance.

Frequently Asked Questions (FAQ):

Q: Can this downlight be used in wet areas?

A: No, this downlight is rated for indoor use only and should
not be exposed to water.

Q: Is professional installation required?

A: It is recommended to have the downlight installed by a
qualified electrician to ensure safety and proper
functionality.

Q: Can the color temperature be changed after
installation?

A: No, the color temperature is fixed based on the selection at
the time of installation.

AT9027 TRI
10W LED Low Profile LED Flush Downlight with
dimmable driver – Tri-CCT Energy efficient LED Low profile design for installation into ceilings with low clearances Flush fascia Phase-cut dimmable Tri-CCT selectable

ORDERING INFORMATION

Order code

11869

Description

10W Flush Lens low profile LED downlight with dimmable driver – Tri-CCT White

Driver Type

Dimmable ( Phase cut)

Item Code

AT9027/WH/TRI

MECHANICAL

Adjustability

Fixed

Body Material

Aluminium

Diffuser Material

PMMA

Product Finish

Powdercoated

Fitting Colour

White

IC Rating

IC-4

IC-4 rating has been conducted at the products maximum working Temperature Range (C) in line with Australian standards. This provides the required safety when covered with insulation and used in Australian Environments.

Installation Type

Recessed

IP Rating

IP54 Front Face Only

ELECTRICAL

Electrical Rating

Class II

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac – 253Vac or 240V +6%

Maximum Wattage

10 W

Switch Type System Max Wattage Working Temp Range

Inline 10 W -20 to 40 °C

LAMP
Macadam Steps (SDCM) Beam Angle CCT Configuration Colour Rendering Index (CRI) Lamp/LED Current Lamp/LED voltage

5-step MacAdam Ellipse 90 ° TRI-CCT >80 230 mA 36 V

LED LIFETIME

LED Lifetime

>54,000 hrs

This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states “The Calculated and Projected Lp(Dk) are not to be reported”. This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below.

TM-21 Test Hours

9000 hrs

1300 438 658

sales@evolt.com.au

atomlighting.com.au

© 2024 Evolt

Generated on 19th of June 2024 00:54:18 – Page 1

COLOUR TEMPERATURE

Warm White (3000K K)

1050 lm

Cool White (4000K K)

1150 lm

DayLight (5700K K)

1100 lm

AT9027/WH/TRI

DRIVER
Dimmable Driver Included Integrated Driver Driver Mode Driver Type Flex & Plug or Lead Length Wiring Type

Yes Yes No Constant Current Dimmable ( Phase cut) 600 mm Re-wireable Flex & Plug (2 pin)

PHOTOMETRICS
AT9027/WH/TRI/3000K

COMPLIANCE
Standards

AS/NZS 60598.1 AS/NZS 60598.2.2 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15

WARRANTY

Domestic Use Warranty

3 (Yr) RTB

VIP Warranty

2 Onsite, 3 RTB (Total 5 Years)

VIP warranty is available to registered users and is subjected to additional terms and conditions.

DIMENSIONS
Cutout Product Diameter Product Height
LINE DRAWINGS

90-95 mm 110 mm 27 mm

AT9027/WH/TRI/5700K

Generated on 19th of June 2024 00:54:18 – Page 2

Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE

AT9027/WH/TRI/4000K
Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE
Powered by TCPDF (www.tcpdf.org)

Generated on 19th of June 2024 00:54:18 – Page 3

Documents / Resources

atom AT9027 Low Profile 10W LED Dimmable Flush Downlight [pdf] Instructions
AT9027, 11869, AT9027 Low Profile 10W LED Dimmable Flush Downlight, AT9027, Low Profile 10W LED Dimmable Flush Downlight, 10W LED Dimmable Flush Downlight, LED Dimmable Flush Downlight, Dimmable Flush Downlight, Flush Downlight

References

Leave a comment

Your email address will not be published. Required fields are marked *