ATOM SQ Production and Performance Pad Controller
Production and Performance Pad Controller
Go online to my.presonus.com and register your serial number.
To begin using your ATOM SQ controller, connect it to an available USB port on your computer. No driver installation is necessary. Specialized operation is automatically engaged when connected to Studio One and Ableton Live. Please review your ATOM SQ Operation Manual available at www.PreSonus.com for more information.
ATOM SQ
Screen Controls
Use the encoder to change parameter values. Press the button above or below a parameter to change the value. Use the left and right arrow buttons to go to the next or previous screen for any of the menu options.
MIDI Mode Screen Controls
Song Menu
While in MIDI Mode, select to assign the 6 Screen buttons using MIDI learn (DAW dependent). While MCU or HUI mode is active, this screen will display common functions. See Owners Manual for details.
Instrument Menu
While in MIDI Mode, select to change the Pad function between Keyboard and Drum Modes and access the Arpeggiator function as well as other parameters. See Owners Manual for details.
Editor Menu
While in MIDI Mode, select to change controller and channel assignments. Press a button or pad to access its assignments. Turn an encorder to access its assignments
User Menu
While in MIDI Mode, select to change the function of the Touch Strip and other parameters. See Owners Manual for details.
Setup Menu
Use the Setup Menu to customize your ATOM SQ. You can adjust the screen and pad LED brightness. The Pressure, Threshold, and Strike Velocity of the pads can also be adjusted from this menu. See Owners Manual for details
PRODUCT COMPONENTS
Documents / Resources
 |
ATOM SQ Production and Performance Pad Controller [pdf] User Guide Production and Performance Pad Controller, Performance Pad Controller, Pad Controller, Controller |
