QUICK USER MANUAL
VT15
TRIGGER TOOL FOR TPMS
|
|
|
|
|
|
1 – Put the VT15 in front of the tire near the sensor
2 – Start the cycle by pressing and releasing the left key (TX1) 
3 – The result can be immediate to 50 seconds
4 – Stop the cycle by pressing the right key (TX2) * The cycle stops itself after 50 seconds
|
|
|
|
Low Bat light on (TX2)
Replace the battery with a similar
Do not dispose of the battery to the dustbin* 
The crossed-out wheeled dustbin means that within the EU the product must be taken to separate collection at the product end-of-life.
For all updates, manuals, and information see the following link: www.ateq-tpms.com
EU Declaration of Conformity (DoC)
Company name: ATEQ
Postal address: 15 rue des Dames
Postcode and City: 78340 Les Clayes sous Bois
Telephone number: 01 30 80 10 20
E-Mail Address: info@ateq.com
declare that the DoC is issued under our sole responsibility and belongs to the following product:
Apparatus model/Product: TPMS (Tire-pressure monitoring system) Tool
Type: VT15
The object of the declaration
The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Radio Equipment (RED) Directive 2014/53/EU
References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: EN 61010-1:2010, EN 61326-1:2013, EN 301 489-1 V2.2.3, EN 300 220-2: V3.2.1, EN 300 330 V2.1.1
Non-harmonized standards: EN62479:2010
Signed for and on behalf of Place and date of issue
Mr Jacques MOUCHET, Chairman and CEO
30 Nov. 2020
Documents / Resources
 |
ATEQ VT15 Trigger Tool for TPMS [pdf] User Manual VT15, Trigger Tool for TPMS |
