Atatech K28 Multiple Function RGB Light Wireless Speaker

Component

• Wireless Speaker* 1
• Charging Cable* 1
• Microphone* 1

Specification

• Model No: K28
• Mic: Capacitive
• Speaker:40 6W
• Charging voltage: DC 5V
• Bluetooth Version: 5.3
• Material: ABS
• Frequency Response Range: 100Hz-10KHz
• Maximum Sound Pressure Level: >115dB 1Khz THD < 1%
• Sound Mode: Reverb Mode
• Rechargeable Battery: 18650battery

OVERVIEW

1. Long press: prev song
   • Short press: volume-
2. Long press: power on/off
   • Short press: play/pause
3. Long press: next song
   • Short press: volume+
4. Short press: Bluetooth/ TF
   • Card mode switch
5. Short press: Switching Lights
   • Short press: On/Off Lights
6. AUDIO IN
7. Headphone jack
8. DC 5V charging port
9. Blue indicator light:
   • working indicator light
   • Red indicator light: charging indicator light
10. TF card slot
11. USB
    1. Long press: power on/off
       • Short press: reverb/ accompaniment/ mic volume adjustment
       • Double click: play/pause
    2. Long press: next song
       • Short press: volume +
    3. Long press: prev song
       • Short press: volume –
    4. Long press: microphone sound off/on
       • Short press: magical voice switch
       • Double click: original voice remove
    5. Blue indicator light: working indicator light
       • Red indicator light: charging indicator light

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Documents / Resources

Atatech K28 Multiple Function RGB Light Wireless Speaker [pdf] User Manual O79-K28, O79K28, K28 Multiple Function RGB Light Wireless Speaker, K28, Multiple Function RGB Light Wireless Speaker, Function RGB Light Wireless Speaker, RGB Light Wireless Speaker, Light Wireless Speaker, Wireless Speaker, Speaker

References

• User Manual