4991-41 All-Fi Extender
“
Product Information
Specifications:
- Model: WFEXT4991-41
- Brand: Airties
- Product Name: AT&T ALL-Fi Extender
- Connectivity: 5Gb Ethernet
Product Usage Instructions
Initial Setup:
- Download the setup app by scanning the QR code provided in the
manual. - Login to the setup app and follow the on-screen instructions to
set up your All-Fi Extender.
Alternate Setup Method:
Power Up:
- Plug in the power cord of your Wi-Fi Extender and connect it to
a power outlet near your AT&T Wi-Fi Gateway. - Press the Power button on the back of the Wi-Fi Extender and
wait for the light to blink GREEN (2-3 minutes).
Pairing:
- Press the WPS button on your AT&T Wi-Fi Gateway (ensure WPS
is enabled). - Press the WPS button on your Wi-Fi Extender and wait for
automatic pairing (flashing light turns solid GREEN). - If not paired within 5 minutes, repeat the pairing
process.
Placement:
- Unplug the Extender and move it to a location between your
Gateway and desired signal area (20-40 ft). - Avoid obstructions and interference sources, then plug the
Extender back in and wait for a GREEN light.
Final Steps:
Congratulations! Your All-Fi Extender setup is complete.
Troubleshooting
Lights Indicators:
- Solid red light: Bad location, move closer to Gateway or
another Extender. - Flashing red light: Out of range, adjust positioning.
Pairing Issues:
If facing pairing problems, use the included Ethernet cable to
connect the Extender manually to the Gateway.
Internet Connection:
Ensure active AT&T Internet service with Wi-Fi coverage for
proper Extender functionality.
Check Connections:
Verify all cables are securely connected between devices.
Power Cycling:
If issues persist, power down both the Gateway and Extender,
wait 15 seconds, and power them back up.
“` “
Frequently Asked Questions (FAQ)
Q: How can I reset my All-Fi Extender?
A: To reset your All-Fi Extender, locate the RESET button on the
device and press and hold it for about 10 seconds until the lights
flash. This will reset the Extender to its factory settings.
Q: Can I use multiple All-Fi Extenders in my home?
A: Yes, you can use multiple All-Fi Extenders in your home to
extend your Wi-Fi coverage. Follow the same setup process for each
additional Extender to ensure proper functionality.
Q: What should I do if my Extender is not connecting to the
Wi-Fi Gateway?
A: If your Extender is having trouble connecting to the Gateway,
try moving it closer to establish a better connection. You can also
check for any interference sources that may be affecting the signal
strength.
Q: How can I update the firmware of my All-Fi Extender?
A: To update the firmware of your All-Fi Extender, check for any
available updates in the setup app or visit the manufacturer’s
website for instructions on updating the firmware manually.
Q: What is the range of the All-Fi Extender?
A: The recommended range between the nearest Gateway or Extender
is up to 40 ft, allowing for optimal signal strength. Ensure there
are no more than two walls or one floor between the devices for
best performance.
“`
280
FRONT
WFEXT4991-41
Airties
AT&T ALL-Fi Extender
Let’s get started
Download the setup app to set up your All-Fi Extender (scan the QR code).
Aim your camera at the code.
Login to the setup app and follow the steps in the app to set up your All-Fi Extender.
All-Fi Extender
5Gb ETHERNET
1
2
RESET
POWER
Need more help? Go to att.com/xxxxxx for a video walk through. Or scan this QR code.
SAMPLE
Diecut dimensions
172.0
MP-00000XXXXXREV30042024
REAR
Connecting For a Cleaner Future
This package is 100% recyclable. Please recycle and join us in building a sustainable future. To learn more about our commitment to the environment, go to att.com/environment
MP-00000XXXXXREV30042024
Alternate Setup Method
5-10 feet distance
Power Broadband Phone
Power Up
Plug in
the power cord to your Wi-Fi Extender and then plug it into a power outlet close to your AT&T Wi-Fi Gateway.
Push
the Power button on the back of the Wi-Fi Extender.
Wait
about 2-3 minutes for the light to blink GREEN.
Tip: To make sure your setup is successful, make sure:
· Both the 2.4GHz and 5GHz radio bands are enabled. For help, use the Smart Home Manager app or go to att.com/enhancedwifi
· If you have dual SSIDs make sure they have the same name and password
Power Broadband Phone
Pair
Press
the WPS button on your AT&T Wi-Fi Gateway. (Make sure WPS is enabled.)
Press
the WPS button on your Wi-Fi Extender.
Wait
about 3 minutes for the devices to automatically pair. The flashing light will turn solid GREEN when paired.
Note: The light may turn off during pairing. This is normal. If it does not light up solid GREEN within 5 minutes,
repeat the pairing process.
Place
Power Broadband
20-40 feet
Unplug
your Wi-Fi Extender from the power outlet.
Wi-Fi Gateway AT&T Smart Wi-Fi Extender
Move
your Wi-Fi Extender to its new location between your Wi-Fi Gateway and the area where you want a stronger signal.
Tip: Max distance between nearest Gateway or Extender is 40 ft, two walls, or one floor away. Extenders work best placed on open
surfaces away from large obstructions and things that can cause interference (e.g., microwaves, wireless devices, etc.).
Plug
your Wi-Fi Extender into a power outlet and wait a few minutes for the connection to reestablish and the light to turn GREEN.
You’re done!
Troubleshooting
If you see one of these lights, move the Wi-Fi Extender closer to the Wi-Fi Gateway or another connected Extender.
Solid red light Bad location
Flashing red light Out of range
If you’re having trouble pairing your Extender with your Gateway, you can use the included Ethernet cable to connect your Extender to your Gateway and pair them manually.
If you still have an issue, check your AT&T Internet service or Wi-Fi Gateway.
Your AT&T Internet service needs to be active.
You must have working AT&T Internet service and have a subscription to AT&T Wi-Fi Coverage for your Extender to work correctly.
Check your connections.
Check all cables and cords to ensure they are connected properly and securely.
Power down, power up.
Unplug the power cord from the back of your Wi-Fi Gateway. Leave it unplugged for 15 seconds and plug it back in. Then unplug the power cord from the back of your Extender. Leave it unplugged for 15 seconds and plug it back in.
You may need to wait up to 3 minutes for your Gateway or Extender to completely reboot.
Go to att.com/wifiextender for additional Extender support.
Is my Extender working?
Your Wi-Fi Network Name and Password do not change so it won’t appear as a new network. To check if it’s working:
1. Your Extender is paired and functioning when the light is solid green. OR
2. Use the AT&T Smart Home Manager app to check if the Extender is on your network. (It will appear in the Devices section when it’s connected.) Get Smart Home Manager at att.com/smarthomemanager
AT&T Smart Home Manager gives you easy access to your home network information in one convenient spot and can also be used to:
See who’s on your Wi-Fi network. Personalize your device names, like “Matt’s smartphone,” or “Monica’s laptop.”
Invite guests to your Wi-Fi network with ease via text and email.
Need more coverage?
It’s easy! Go to att.com/betterwifi to purchase additional AT&T Smart Wi-Fi Extenders and increase Wi-Fi coverage in your home.
Additional Information
Manage your account
Available 24/7, download the myATT app at att.com/myattapp from your mobile device.
Accessibility support
· Alternate format guides: – Braille or large print: call 800.288.2020 – Accessible-tagged PDF: visit att.com/userguides
· Telephone equipment for visual and/or hearing impaired: -Phone: 800.772.3140 -TTY: 800-651-5111
¿Hablas español? Visita att.com/userguides y haz clic en “Ver en
español” al final de la página. También puedes consultar la guía del extensor de señal Smart Wi-Fi de AT&T para ver más detalles.
Need more help?
Go to att.com/support Call us at 800.288.2020 and ask for “technical support.”
© AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
ATT182840954
Printed on recycled paper. Please recycle.
Federal Communications Commission (FCC) Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation
FCC Radio Frequency Interference Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and devices. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult a dealer or an experienced radio/TV technician for assistance.
FCC Caution The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate this product.
The operation of this is prohibited on oil platforms, cars, trains, boats, and aircraft, except the device is permitted in large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band.
Operation of transmitters in the 5.915-7.125 GHz band is prohibited for control of or communication with unmanned aircraft systems.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 45 cm (approx. 17.7 in.) between the radiating element and any person. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
Per FCC regulation, 2.4GHz operation of this product in the USA/CA is firmware limited to channels 1 through 11.
FCC regulations restrict the operation of this product to indoor use only.
A California Proposition 65 WARNING: This product can expose you to Antimony Trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Documents / Resources
 |
AT and T 4991-41 All-Fi Extender [pdf] User Manual Z3WAIR4991-41, Z3WAIR499141, air4991 41, 4991-41 All-Fi Extender, 4991-41, All-Fi Extender, Extender |