AstroPak H13 Hepa Filter
Features and Benefits
- Can be scanned for leakage when installed according to ISO14644-3
- Optimized media pack utilizing thermoplastic separator technology
- Available in 292mm depth box configurations giving:
- Improved performance*
- Increased robustness*
- Improved total cost o
- Available inefficiencies from E12 to H14 according to EN1822
- Available in a wide range of dimensions
- Available in aluminum and MDF frames
Applications
- Final HEPA filtration stage for air handling units
- Cleanroom terminal housings requiring high air velocities
- Containment systems requiring filter validation
Configurations
| Filter media | Glassfibre |
| Pocket design | Mini-pleat |
| Separator | Thermoplastic |
| Standard pack depths** | 48, 72, 96, 120, 180 mm |
| Frame material** | Anodized extruded aluminium, MDF |
| Sealant | Polyurethane (PU) |
| Gasket** | Polyurethane foam, neoprene |
| Faceguard (optional) | Epoxy coated steel, stainless steel |
| Recommended max. resistance | 600 Pa |
| Max. operating temperature | 70 °C |
| Labelling | Duplicate air filter label, double tear-off air filter label |
| Enclosed documentation | Individual test report to EN1822 |
| Moisture resistance | 100% relative humidity |
Other options are available.
| Filter Dimensions | Media Pack Height (mm) | Rated Velocity (m/s) | Initial Resistance (Pa) | |||
| H (mm) | W (mm) | D (mm) | H13 | H14 | ||
|
200 to 1200 |
150 to 1830 |
69 | 48 | 0.75 | 250 | 320 |
| 78 | 48 | 0.75 | 250 | 320 | ||
| 149 | 72 | 1 | 250 | 320 | ||
| 149 | 120 | 1.5 | 250 | 320 | ||
| 292 | 96 | 1.25 | 250 | 320 | ||
| 292 | 180 | 2.25 | 290 | 370 | ||
| Volumetric Flow (m3/h) | |||||
| Common Sizes | 0.75
m/s |
1 m/s | 1.25
m/s |
1.5 m/s | 2.25 m/s |
| 305×305 | 250 | 330 | 420 | 500 | 750 |
| 305×610 | 500 | 670 | 840 | 1000 | 1500 |
| 287×592 | 460 | 610 | 760 | 920 | 1400 |
| 457×457 | 560 | 750 | 940 | 1100 | 1700 |
| 592×592 | 950 | 1300 | 1600 | 1900 | 2800 |
| 610×610 | 1000 | 1300 | 1700 | 2000 | 3000 |
Resistance vs Face Velocity (H13)
Resistance vs Face Velocity (H14)
Features and Benefits
The AstroCel I provides HEPA filtration in medium and high-velocity applications. Deep-pleat technology with corrugated aluminum separators allows:
- Operation in elevated temperatures up to 90°C (over 200°C possible in some executions)
- A uniform airflow for in-situ scan validation testing
- With AAF’s MEGAcel I, membrane media provides significantly reduced operating costs and improved reliability
Features and Benefits
- The AstroCel II is the standard for lean room applications, designed for velocities of 0.45m/s.
Thermoplastic separator technology provides
- An optimized pleat pack offering low resistance and reliable service
- Unidirectional clean air in efficiencies up to U17
- Upgrading to the MEGAcel II product family builds on this with AAF’s membrane media technology, offering unrivaled low operating costs and durability
American Air Filter Company, Inc. has a policy of continuous product improvement. This document is provided for informal review and establishes no commitment or contract. We reserve the right to change any designs, specifications, and products without notice, and we make no warranties regarding the subject matter of this document. Any use, copying, or distribution of this document or any part of this document without our permission is prohibited.
AAF International
European Headquarters
Odenwaldstrasse 4, 64646 Heppenheim
Tel: +49 (0)6252 69977-0
aafeurope.com
2024 AAF International and its affiliated companies.
EHU_506_EN_122024
Documents / Resources
 |
AstroPak H13 Hepa Filter [pdf] Owner's Manual H13, H14, H13 Hepa Filter, H13, Hepa Filter, Filter |