Assorted Y8 Smart Watch
Appearance Description
Schematic Diagram of Charging
Operate in strict accordance with the following figures
- Please use the product-specific magnetic charging cable to charge by aligning it with the charging contacts on the back of the watch.
- Do not use a power adapter with a voltage exceeding 5V and an output current exceeding 1A for charging, as this may cause charging failure and damage to the magnetic charging cable or the device.
- Please activate the watch when it runs out of power before charging: the watch screen will only light up after about 5 minutes of normal charging.
Introduction to Watch Function
- Talking Bluetooth on/off
- Theme mode switching
- Do not disturb on/off
- Mute mode
- Brightness setting
- Wrist lift screen on/off
- Find a cell phone function
- Screen lock
- Settings
Main interface: There are 5 main interfaces; you can choose any one of them as the main interface. Display the current time, date, steps, and other information of the watch; press the main interface for a long time to switch the main dial left and right, and click to confirm.
Watch audio switch: It can turn on/off the watch call function and multimedia sound playback function.
Steps: Display current steps, distance, and calories of the watch.
Heart rate: Slide to this page and keep a while and automatically measure the current real-time dynamic heart rate. Connect the o APP to set real-time monitoring and view data records.
Blood oxygen: Slide to this page and keep a while, and automatically measure the current blood oxygen data and vibrate to indicate the result.
Exercise: Click on the icon on this page to access the multiple sport modes option. Select a sport mode, click the icon to start, and slide right to pause or stop the sport.
Sleep: The bracelet can record and display your sleeping time last night, and the time of deep sleep and light sleep. More detailed data can be viewed synchronously in the APP.
Weather: Display the local weather conditions. Connect the synchronization APP for normal use, and open the phone’s GPS to ensure that the APP gets the positioning permission function and network connection.
Message: The watch can receive cell phone calls, SMS, QQ, WeChat, and other notification alerts, which can be set according to the message alert, and turn on the corresponding push switch on the APP. This page can store up to 8 message records. This function needs to stay connected with the phone and make sure the APP gets the corresponding permission.
Music: After connecting the APP, the watch can control the mobile phone player to play/pause/switch to the previous song and the next song. This function must be opened on the mobile phone player before it can be controlled on the watch. This function requires staying connected to your phone and turning on the push notification permission.
Stopwatch: Click on the icon to start the function, and click Start for timing, pause, or reset. Slide right to leave.
Search: Click this icon, and your phone will beep to indicate the orientation of your phone. This function requires your phone to stay connected with the watch APP. No alert on the phone in silent mode.
Settings: Tap the icon to enter the function, you can set the menu style, brightness adjustment, restore factory, power off, and view watch information.
Watch APP Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be connected to a special APP for normal use, such as time display, call alert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following QR code to select the version suitable for your mobile phone system or enter main application markets to download and install GloryFit.
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and mobile phone GPS positioning to obtain the mobile phone positioning permission. After the connection is successful, it will prompt ” To pair with: Y8 ” , please select pairing.
The watch connection operates as follows.
Note
- For Android users, the APP should obtain permissions and run backstage, otherwise it will affect the user experience.
- For systems below iPhone ios 13, after connecting in the APP, you need to connect to the Y8 for the second time in the Bluetooth settings of the mobile phone, and then you can make calls, play multimedia music and other functions.
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use, and the measurement data is for reference only.
- It is not recommended to wear in hot water baths and for long-term swimming.
- Please charge with the matching charging cable.
- Please keep the charging feed point on the back of the device clean to avoid the device being unable to charge.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQs
1. Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the time of the phone.
Answer: A. Make sure your phone's Bluetooth and phone GPS positioning are on before using it for the first time. B. Users need to open the APP to obtain positioning permission (Phone Settings - Applications). C. If the watch has already been paired with a Bluetooth connection in the phone, please cancel the pairing first and then search for the connection in the APP. D. If the watch is not used for a long time, the Bluetooth will go into a dormant state. Please turn off the Bluetooth of the watch and the phone, reopen it after about 1 minute, and try to search for the connection in the APP again. E. The watch must be connected to the APP; otherwise, the steps, sleep, time, and other functions will not work properly.
4. Android's phone Bluetooth often disconnects or has no message alert after a period of connection.
Answer: Android will from time to time clean up the phone's backstage applications or applications that consume more power for smooth system operation. If the APP is not set to allow backstage running, it will be easily cleaned by the system, and the Bluetooth will drop out. Different Android phones have different methods for APP backstage running settings. As in the Huawei Nova 8 SE: Settings - Battery - Power Consumption Ranking - APP - Application Launch Management - Manually manage to turn on backstage running.
5. The watch cannot measure, or the data is not accurate.
Answer: A. Sit down before the measurement and put your body in a relaxed state with your arms level with your chest position. B. Adjust the tightness of the watch. The back of the watch should be close to the skin to prevent light leakage from the photoelectric sensor. C. Keep your body calm during the measurement. Talking/coughing/ sneezing and other movements will affect the accuracy of the measurement results.
Documents / Resources
 |
Assorted Y8 Smart Watch [pdf] User Manual 2AGFWY8, Y8, Y8 Smart Watch, Y8, Smart Watch, Watch |