1. Introduction
Thank you for choosing the Avutrel S200G GPS Heads Up Display. This device projects essential driving information onto your windshield, allowing you to keep your eyes on the road. Utilizing GPS+BeiDou dual-mode chip technology, it provides accurate speed, time, altitude, and other critical data. This manual will guide you through the installation, operation, and maintenance of your new HUD.

Image: The Avutrel S200G HUD unit on a car dashboard, showing its display and the projected information on the windshield. Key features like real-time speed, GPS compass, trip meter, fatigue reminder, and plug & play are highlighted.
2. Package Contents
Please check the package carefully to ensure all items are present:
- Avutrel S200G HUD Main Unit
- 1.8m USB-C Power Cable
- Instruction Manual
- Reflective Film for Windshield
- 2x Double-Sided Adhesive Tape
- Plastic Pry Bar
- Non-slip Mat

Image: A visual representation of the package contents, including the HUD host, instruction manual, reflective film, double-sided adhesive tape, USB cable, and plastic pry bar.
Video: An unboxing and overview of the Avutrel S200G HUD and its included accessories, demonstrating each component.
3. Product Features
- Dual Display Modes: Features both direct screen display and windshield projection for optimal viewing.
- GPS+BeiDou Dual-Mode Chip: Ensures stable and accurate data readings for speed, altitude, and direction.
- Multi-Function Display: Shows speed, time, altitude, Trip A/B, mileage, driving direction, and satellite count.
- Safety Warnings: Built-in overspeed, rest reminder, and altitude warnings to enhance driving safety.
- Automatic Brightness Adjustment: Integrated light sensor automatically adjusts display brightness for clear visibility in all lighting conditions (day or night).
- MPH/KM-H Switch: Supports both Miles Per Hour and Kilometers Per Hour units.
- Universal Compatibility: Plug-and-play design compatible with most USB-powered vehicles.
- Type-C Interface: For fast and stable data transmission.
- 3-Color Ambient Light: Enhances the visual experience.

Image: The Avutrel S200G HUD showcasing its ability to display multiple data points simultaneously, including speed, time, altitude, trip distance, and warnings.

Image: Comparison of the HUD's display clarity during daytime and nighttime, demonstrating the automatic brightness adjustment feature.
4. Setup and Installation
- Choose Placement: Select a flat, stable area on your dashboard that does not obstruct your view of the road or your vehicle's instruments. The non-slip mat can be used to secure the HUD.
- Connect Power: Connect the USB-C end of the provided 1.8m cable to the HUD unit.
- Route Cable: Use the plastic pry bar to neatly tuck and hide the USB cable along the dashboard edges to your vehicle's USB port or a 5V USB power adapter.
- Plug In: Plug the USB-A end of the cable into your car's USB port. The HUD will power on automatically when the vehicle starts.
- Apply Reflective Film (Optional but Recommended):
- Clean the windshield area where the projection will appear.
- Spray a little water on the cleaned area.
- Peel off the protective layer from the reflective film and carefully apply it to the windshield.
- Use a card or soft cloth to smooth out any air bubbles. This film helps eliminate double images and improves clarity.
- Adjust Position: Adjust the HUD unit's angle and position until the projected display is clear and comfortable to view on your windshield.

Image: A visual step-by-step guide illustrating the quick installation process: connecting the Type-C cable, hiding wiring, plugging into the USB port, placing the HUD, applying reflective film, and starting the car.
5. Operating Instructions
5.1 Power On/Off
The Avutrel S200G HUD powers on automatically when connected to a powered USB port and your vehicle is started. It will power off automatically when the vehicle is turned off and the USB port loses power.
5.2 Display Modes and Settings
The HUD features a control button or scroll wheel (refer to your specific unit for exact control type, typically located on the side or back) to navigate settings. Short presses usually cycle through display modes or confirm selections, while long presses enter/exit settings menus.
- Switching Display Information: Short press the control button to cycle through different display layouts (e.g., speed only, speed + time, speed + altitude).
- Entering Settings Menu: Long press the control button to enter the settings menu.
- Navigating Settings: Once in the settings menu, short press to cycle through options (e.g., MPH/KM-H, overspeed warning threshold, time zone).
- Adjusting Values: Use the control button (e.g., push up/down if it's a scroll wheel, or specific short/long presses) to adjust values.
- Exiting Settings: Long press the control button again to exit the settings menu and save changes.
Note: Specific button functions may vary slightly. Refer to the quick guide included in your package for detailed button operations.
5.3 GPS Signal Acquisition
Upon startup, the HUD will search for GPS signals. This may take a few moments, especially in areas with limited sky view (e.g., underground garages, tunnels, dense urban areas). Once a signal is acquired, the speed and other GPS-dependent data will be displayed.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the HUD unit and its display. Do not use abrasive cleaners or solvents, as they may damage the surface.
- Cable Care: Ensure the USB cable is not pinched or excessively bent, which can damage the internal wires.
- Temperature: Avoid exposing the device to extreme temperatures (very hot or very cold) for extended periods, as this can affect its performance and lifespan.
- Storage: If storing the device for a long time, disconnect it from power and store it in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| HUD does not power on. | No power from USB port; faulty cable; HUD unit issue. |
|
| No speed display or inaccurate speed. | No GPS signal; weak GPS signal; metallic window film interference. |
|
| Double image on windshield. | Windshield glass properties; no reflective film applied. |
|
| Display is too dim or too bright. | Automatic brightness sensor issue; extreme ambient light. |
|
If you encounter issues not listed here or if the solutions do not resolve your problem, please contact Avutrel customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | S200G |
| Brand | Avutrel |
| Display Type | LED Digital Display with Windshield Projection |
| Positioning System | GPS + BeiDou Dual-Mode |
| Power Input | USB 5V |
| Interface | USB Type-C |
| Dimensions (L x W x H) | 120mm x 62mm x 31mm (approx. 4.72 x 2.44 x 1.22 inches) |
| Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
| Units | MPH / KM-H |
| Included Components | Main Unit, 1.8m USB-C Cable, Manual, Reflective Film, Pry Bar, Double-Sided Tape, Non-slip Mat |

Image: A detailed view of the Avutrel S200G HUD with its dimensions (length 120mm, width 62mm, height 31mm) clearly marked.

Image: Illustrates the wide compatibility of the HUD with different vehicle types, including Sedans, SUVs, Pickups, Cargo Vans, Semi Trucks, City Buses, RVs, and EVs.
9. Warranty and Support
Avutrel products are designed for reliability and performance. For warranty information, please refer to the warranty card included in your package or visit the official Avutrel website. If you have any questions, require technical assistance, or experience any issues with your Avutrel S200G HUD, please contact our customer support team. We aim to respond to inquiries within 24 hours.
Customer Support: Please refer to the contact information provided on your product packaging or the official Avutrel website for the most up-to-date support channels.