LIVELYGLOW Makeup Vanity Desk with Smart LED Mirror and Charging Station

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your LIVELYGLOW Makeup Vanity Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

2. Safety Instructions

• Ensure all parts are present and undamaged before beginning assembly.
• Assemble the vanity on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep small parts and packaging materials away from children.
• Only use the provided power strip for its intended purpose. Do not overload the outlets.
• Keep electrical components away from water or excessive moisture.
• Periodically check all connections and fasteners to ensure they remain secure.
• Do not climb on or stand on the vanity or stool.
• If any part is damaged or missing, do not proceed with assembly. Contact customer support.

3. Package Contents

Verify that all components listed below are included in your package. Refer to the assembly diagram for visual identification of parts.

• Vanity Desk Components (panels, drawers, hardware)
• Smart LED Mirror
• Cushioned Stool
• Power Strip with 2 AC Outlets and 2 USB Ports
• Hairdryer Rack
• Assembly Hardware (screws, dowels, cam locks, etc.)
• Instruction Manual

Figure 1: Complete LIVELYGLOW Makeup Vanity Desk with Stool.

4. Assembly Instructions

Before starting, ensure you have a Phillips head screwdriver and a drill (optional, but recommended for faster assembly). Follow the numbered steps carefully.

4.1. Prepare Components

• Unpack all components and lay them out on a protected surface.
• Identify each part using the labels and the provided parts list.

4.2. Assemble the Vanity Base

• Connect the side panels to the main desktop panel using the designated hardware.
• Secure all connections firmly but do not overtighten.

4.3. Install Drawers

• Assemble each drawer according to the specific instructions for drawer slides and handles.
• Insert the assembled drawers into their respective slots in the vanity frame. Ensure smooth operation.

Figure 2: Vanity with drawers open, showing storage capacity and power outlet location.

4.4. Attach Smart LED Mirror and Shelves

• Carefully attach the Smart LED Mirror unit to the top of the vanity desk.
• Install the multi-layer open shelves adjacent to the mirror.
• Connect the mirror's power cable to the designated port or power strip.

Figure 3: Detailed view of the Smart LED Mirror, four drawers, and cushioned stool.

4.5. Install Power Strip and Hairdryer Rack

• Mount the built-in power strip to the side of the vanity as indicated in the assembly diagram.
• Attach the hairdryer rack next to the power strip.

Figure 4: Close-up of the built-in power source, showing 2 AC outlets and 2 USB ports.

4.6. Assemble Cushioned Stool

• Assemble the stool base and attach the cushioned top.
• Ensure the stool is stable and all fasteners are tight.

5. Operating Instructions

5.1. Smart LED Mirror

• Power On/Off: Lightly touch the power icon (⏻) on the mirror surface to turn the LED lights on or off.
• Change Color Temperature: With the lights on, lightly touch the color temperature icon (☀) to cycle through the three lighting modes: Warm Yellow (3000K), Natural White (4000K), and Cool White (6000K).
• Adjust Brightness (Stepless Dimming): To adjust brightness, press and hold the power icon (⏻) until the desired brightness level is reached. Release to set.

Figure 5: The Smart LED Mirror offers three color temperature settings: Cool Light (6000K), Natural Light (4000K), and Warm Light (3000K).

Figure 6: Long press the touch control button on the mirror to adjust light brightness from 0% to 100%.

5.2. Built-in Power Strip

• Plug the vanity's main power cord into a standard wall outlet.
• Use the 2 AC outlets (125V/12A) for hair dryers, curling irons, or other small appliances.
• Use the 2 USB ports (5V/2.1A) to charge mobile devices.
• Do not exceed the maximum power rating of the strip.

5.3. Storage Drawers and Shelves

• Utilize the large main drawer and three side drawers for organized storage of cosmetics, skincare, and accessories.
• The open shelves provide additional space for frequently used items or decorative elements.
• The hairdryer rack is designed to hold your styling tools conveniently.

6. Maintenance

• Cleaning the Surface: Wipe the vanity surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Cleaning the Mirror: Use a glass cleaner and a microfiber cloth to clean the LED mirror. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Hardware Check: Periodically inspect all screws and fasteners to ensure they are tight. Retighten if necessary.
• Drawer Maintenance: If drawers become stiff, apply a small amount of silicone lubricant to the drawer slides.

7. Troubleshooting

8. Specifications

• Model Number: E124-006-4
• Brand: LIVELYGLOW
• Material: Engineered Wood
• Product Dimensions (D x W x H): 15.7" x 34.1" x 53.1"
• Item Weight: Approximately 80 pounds
• Number of Drawers: 4
• Included Components: Smart LED Mirror, Cushioned Stool, Power Strip, Hairdryer Rack
• LED Mirror Lighting: 3 Color Temperatures (3000K, 4000K, 6000K), Stepless Dimming
• Power Strip: 2 AC Outlets (125V/12A), 2 USB Ports (5V/2.1A)

Figure 7: Detailed product dimensions for the vanity desk and stool.

9. Warranty and Customer Support

LIVELYGLOW is committed to providing quality products. If you encounter any issues with your vanity desk, or if you have questions regarding assembly, operation, or missing parts, please contact our customer support team. Refer to your purchase documentation for specific warranty details and contact information.

For assistance, please visit the LIVELYGLOW Store on Amazon or contact the seller directly through your order history.