Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Ecoluminor Wireless Dog Fence System LX-001. This 2-in-1 system combines a wireless boundary with a remote training collar to help manage your dog's outdoor activities and reinforce desired behaviors. Please read this manual thoroughly before using the product to ensure safe and effective operation.
Safety Information
- This system is designed for dogs weighing 10-130 lbs with a neck circumference up to 23.6 inches.
- Do not use this system on aggressive dogs. Consult a professional trainer for behavioral issues.
- Ensure the collar fits snugly but not too tightly. It should allow two fingers to fit comfortably between the strap and your dog's neck.
- Avoid leaving the collar on your dog for more than 12 consecutive hours to prevent skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If found, discontinue use until the skin heals.
- The remote control is not waterproof. Keep it dry. The collar is IPX7 waterproof.
- Always supervise your dog, especially during initial training, to ensure they understand the boundaries and responses.
Package Contents
Verify that all items are present in your package:
- Remote Control (x1)
- Collar Unit (x1)
- Collar Strap (x1)
- USB Charging Cable (x1)
- Contact Points (x2 sets: short and long)
- Test Light (x1)
- Lanyard (x1)
- User Manual (x1)
Image: Contents of the Ecoluminor Wireless Dog Fence System LX-001 package.
Product Features
- 2-in-1 Functionality: Operates as both a wireless dog fence and a remote training collar.
- Multiple Training Modes: Offers sound (beep), vibration (0-10 levels), and static correction (0-99 levels) for tailored training.
- Adjustable Wireless Fence Range: Creates a circular safety zone from 30 to 1300 feet radius. Independent training mode extends effective range to 3800 feet.
- Long Battery Life: Both remote and collar charge fully in 2 hours. Collar provides up to 24 hours of continuous use in boundary mode or 185 days standby.
- Security Keypad Lock: Prevents accidental setting changes on the remote.
- IPX7 Waterproof Collar: Designed to withstand rain, swimming, and other wet conditions. (Note: Remote is not waterproof).
- Memory Function: Retains boundary settings after power-off.
Image: Overview of the four effective training modes available on the remote control.
Image: Illustration of the portable wireless fence system's adjustable range, suitable for various outdoor settings.
Image: Details on the long battery life and quick charging capabilities of the system.
Image: The security keypad lock and adjustable hand strap feature of the remote control.
Image: The IPX7 waterproof and rechargeable collar, suitable for all weather conditions and water activities.
Image: The adjustable collar is designed to fit a wide range of dog sizes, from 10 to 130 lbs.
Setup
1. Charging the Devices
Before first use, fully charge both the remote control and the collar unit. Connect the USB charging cable to the charging ports on both devices and plug it into a suitable USB power adapter. The indicator lights will show charging status and turn solid when fully charged (approximately 2 hours).
2. Attaching the Collar Strap and Contact Points
Thread the collar strap through the collar unit. Select the appropriate length of contact points (short for short-haired dogs, long for long-haired dogs) and screw them securely onto the collar unit. Ensure the contact points make proper contact with your dog's skin.
3. Pairing the Collar and Remote
Turn on both the remote control and the collar unit. Follow the instructions on the remote's display to initiate the pairing process. Once paired, the remote will display the collar's status and battery level.
4. Adjusting Collar Fit
Place the collar on your dog's neck, ensuring the contact points are positioned correctly. Adjust the strap so it is snug but not tight. You should be able to fit two fingers between the strap and your dog's neck. Trim any excess strap if necessary.
5. Setting the Wireless Fence Boundary
With the remote control, select the fence mode. Choose your desired radius for the wireless boundary (30 to 1300 feet). The remote will act as the center point of this circular boundary. Test the boundary by walking with the collar unit to ensure it activates at the desired distance.
Video: A detailed guide on setting up the wireless dog fence system, including pairing and boundary configuration.
Operating Instructions
1. Remote Control Overview
The remote control features a display screen and buttons for selecting modes, adjusting intensity levels, and activating corrections. Familiarize yourself with the button layout and screen indicators.
2. Selecting Training Modes
Use the mode selection buttons on the remote to switch between Beep, Vibration, and Static correction modes. The display will indicate the active mode.
3. Adjusting Intensity Levels
For Vibration and Static modes, use the intensity adjustment buttons to select a level appropriate for your dog's temperament and sensitivity. Start with the lowest effective level and increase gradually if needed.
4. Activating Wireless Fence Mode
In fence mode, the collar will automatically activate a warning beep when your dog approaches the set boundary. If the dog continues past the warning zone, it will receive a vibration or static correction, depending on your settings, to encourage them to return to the safe area.
5. Keypad Lock Function
To prevent accidental changes to settings, activate the keypad lock feature on the remote control. Refer to the remote's display for instructions on how to lock and unlock the keypad.
Video: Demonstration of the three training modes and their application with the electric dog fence system.
Video: Comprehensive guide on operating the electric fence for dogs, including boundary setting and correction usage.
Training Guide
Effective training is crucial for your dog to understand and respect the wireless fence boundaries. Always start with positive reinforcement and gradual introduction.
1. Introduction to the Collar
Allow your dog to wear the collar for a few days without activation. This helps them associate the collar with comfort, not correction. Supervise them during this period.
2. Establishing Boundaries
Mark the boundary of your wireless fence with visual cues, such as flags (not included). Walk your dog on a leash towards the boundary. When the collar emits the warning beep, immediately guide your dog back into the safe zone, praising and rewarding them.
3. Introducing Corrections
Once your dog understands the warning beep, gradually introduce vibration or static correction at a low level if they cross the boundary after the warning. Immediately guide them back to the safe zone with positive reinforcement.
4. Consistent Practice
Conduct short, frequent training sessions (10-15 minutes) daily. Consistency is key. Never use the system to punish your dog; it is a tool for teaching boundaries.
5. Supervision
Always supervise your dog when they are wearing the collar, especially during the initial training phase, until you are confident they understand and respect the boundaries.
Video: An instructional video demonstrating the 2-in-1 electric dog fence system and its training applications.
Maintenance
- Cleaning: Regularly clean the collar strap and the contact points with a damp cloth. Ensure the contact points are free of dirt or debris to maintain proper conductivity.
- Charging: Always use the provided USB charging cable. Avoid overcharging by disconnecting the charger once the devices are fully charged.
- Storage: Store the system in a cool, dry place when not in use. Ensure both the remote and collar are turned off to preserve battery life.
- Contact Point Inspection: Periodically check the contact points for wear and tear. Replace them if they become damaged to ensure effective operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote. | Low battery on collar or remote; devices not paired; out of range. | Charge both devices; re-pair collar and remote; ensure devices are within effective range. |
| Inconsistent fence boundary. | Interference from metal objects or thick walls; remote not centrally located. | Relocate the remote to a more central, open area; avoid large metal structures near the boundary. |
| Correction not felt by dog. | Contact points too short; collar too loose; dog's fur too thick. | Ensure contact points touch skin; tighten collar (two-finger rule); use longer contact points if necessary. |
| Remote keypad is locked. | Keypad lock feature activated. | Refer to the remote's display for unlocking instructions (usually a long press on a specific button). |
Specifications
- Model Number: LX-001
- Brand: Ecoluminor
- Material: Plastic
- Color: Black
- Collar Waterproof Rating: IPX7
- Recommended Dog Weight: 10-130 lbs
- Neck Size: Up to 23.6 inches
- Battery Type: Nonstandard Battery (included)
- Charging Time: Approximately 2 hours
- Collar Battery Life (Boundary Mode): Up to 24 hours continuous use
- Remote/Collar Standby Time: Up to 185 days
- Wireless Fence Range: 30 to 1300 feet radius
- Independent Training Range: Up to 3800 feet
- Training Modes: Beep (1 level), Vibration (0-10 levels), Static (0-99 levels)
- Package Dimensions: 7.05 x 6.77 x 2.17 inches
- Item Weight: 13.76 ounces
Warranty and Support
Please refer to the instruction manual for detailed warranty information. For any questions, technical support, or assistance with your Ecoluminor Wireless Dog Fence System LX-001, please contact our customer service. Contact details can typically be found on our official website or through your purchase platform.