Olela Queen Murphy Bed with Desk and Storage (Model 14) Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Olela Queen Murphy Bed with integrated desk and storage. This versatile furniture piece combines a queen-size bed, a self-leveling desk, and a side cabinet with shelves and drawers, designed to optimize your living space.

Please read this manual thoroughly before beginning assembly or operation to ensure proper use and longevity of your product.

2. Safety Information

Your safety is paramount. Adhere to all warnings and instructions to prevent injury or damage to the product.

Wall Mounting is Required: For absolute safety and stability, this Murphy bed unit MUST be securely anchored directly into wall studs or concrete/brick walls. NEVER install directly into hollow drywall alone.
Two-Person Assembly: Assembly requires a minimum of two adults. Do not attempt to assemble alone.
Mattress Weight: The mattress used with this bed MUST weigh at least 55 lbs (25 kg) to ensure the bed naturally weighs down flat on the floor when lowered. The maximum mattress thickness is 10 inches (25.4 cm). (Mattress not included).
Weight Capacity: The bed frame supports up to 1100 lbs (500 kg). The integrated desk supports up to 100 lbs (45 kg). Do not exceed these weight limits.
Clearance: Ensure the area around the bed and desk is clear of obstructions during operation.

Diagram showing acceptable wall types for mounting: Concrete Wall, Brick Wall, Wood Stud, with a person drilling into a wall. — **Figure 2.1:** Wall Mounting Requirements. The unit must be anchored to solid structures like concrete, brick, or wood studs. Hollow drywall alone is insufficient.

3. Package Contents

The Olela Queen Murphy Bed with Desk and Storage is shipped in multiple boxes due to its size and commercial-grade materials. Please ensure all boxes have arrived before beginning assembly.

Total Boxes: 5 boxes (typically 3 for the bed unit, 1 for the side cabinet, and 1 for the desk).
Important: Boxes may arrive on different days. Do not begin assembly until all 5 boxes are received.
Mattress: Mattress is NOT included and must be purchased separately.

Diagram showing the dimensions of the Queen Murphy Bed and the packaging indicating 'Ship in 5 Packages May Arrive Separately'. — **Figure 3.1:** Product dimensions and packaging information. The unit ships in 5 separate packages.

4. Setup and Assembly

Assembly of the Olela Queen Murphy Bed requires careful attention to detail and adherence to safety guidelines. Please follow the detailed assembly instructions provided in the separate assembly guide included with your product.

Preparation: Clear a spacious area for assembly. Ensure all 5 boxes have arrived and all parts are accounted for before starting.
Tools Required: Refer to the assembly guide for a complete list of tools. Basic tools typically include a screwdriver, hammer, and level.
Wall Anchoring: This is a critical step. The unit must be securely anchored to wall studs or concrete/brick walls using the provided hardware. Improper anchoring can lead to serious injury or product failure.
Hydraulic System: The advanced 4-hydraulic gas shocks are pre-installed or require specific installation steps. Follow the assembly guide carefully for correct installation and adjustment to ensure effortless operation.

5. Operating Instructions

The Olela Queen Murphy Bed is designed for smooth and effortless transformation between bed and desk modes.

5.1. Lowering the Bed

Ensure the area in front of the unit is clear of any obstructions.
Gently pull the bed handle downwards. The 4-hydraulic gas shocks will assist in a controlled and smooth lowering motion.
As the bed lowers, the integrated desk will automatically glide underneath, maintaining a horizontal position.
Continue lowering until the bed frame rests flat on the floor.

A woman effortlessly lowering the Murphy bed, demonstrating the hydraulic lift system. — **Figure 5.1:** Demonstrating the effortless operation of the hydraulic lift system when lowering the bed.

5.2. Raising the Bed

Ensure the mattress meets the minimum weight requirement (55 lbs) for optimal operation.
Grasp the bed frame handle and gently lift upwards. The hydraulic system will assist in raising the bed.
As the bed raises, the desk will retract into its storage position, remaining horizontal.
Continue lifting until the bed is fully upright and securely latched into the closed position.

Four panel image showing the transformation of the Murphy bed from closed to open, and open to closed, highlighting effortless lift. — **Figure 5.2:** The bed transforms in seconds with an effortless lift, showcasing the transition between bed and desk modes.

5.3. Using the Desk

The 65.6-inch wide desk remains perfectly flat and horizontal as the bed is lowered or raised.
You can safely leave items up to 4 inches (10 cm) tall on the desk surface when transitioning the bed.
The desk supports up to 100 lbs (45 kg).

Image showing the spacious built-in workstation with dimensions, and a close-up of the zero-clearance desk mechanism. — **Figure 5.3:** The spacious built-in workstation features a zero-clearance desk that remains horizontal during bed operation.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your Murphy bed.

Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
Check Wall Anchors: Periodically inspect the wall anchors to ensure they remain secure. Tighten if necessary.
Hydraulic System: The hydraulic gas shocks are designed for long-term use. If you notice any change in the smoothness of operation, ensure there are no obstructions and contact customer support if issues persist. Do not attempt to disassemble the hydraulic system.
Hardware: Check all screws and fasteners periodically and tighten if loose.

7. Troubleshooting

If you encounter any issues with your Olela Queen Murphy Bed, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
Bed does not stay down flat.	Mattress is too light.	Ensure mattress weighs at least 55 lbs (25 kg).
Difficulty lowering or raising the bed.	Obstruction or hydraulic system issue.	Check for obstructions. Ensure hydraulic shocks are correctly installed and not damaged. Contact customer support if issue persists.
Desk is not level or jams during operation.	Improper assembly or obstruction.	Review assembly instructions for desk mechanism. Check for any items obstructing the desk's movement.
Unit feels unstable or wobbly.	Improper wall anchoring or loose fasteners.	Verify wall anchors are securely fastened to studs or concrete. Tighten all assembly screws.

8. Specifications

Key specifications for the Olela Queen Murphy Bed with Desk and Storage (Model 14):

Model: 14
Size: Queen Frame ONLY
Color: Black
Frame Material: Engineered Wood
Product Dimensions (L x W x H): 87.8" x 80.71" x 85.04" (223 cm x 205 cm x 216 cm)
Item Weight: Approximately 332.2 lbs (150.7 kg)
Bed Weight Capacity: 1100 lbs (500 kg)
Desk Weight Capacity: 100 lbs (45 kg)
Mattress Requirements: Maximum 10" (25.4 cm) thick, Minimum 55 lbs (25 kg) weight. (Mattress not included)
Included Components: Murphy Bed Frame, Integrated Desk, 1 Side Cabinet (with 4 shelves and 3 drawers)
Special Features: 4-Smooth Hydraulic Lift System, Self-Leveling Desk, Integrated Storage

Image illustrating mattress requirements: Max 10 inches thick, Min 55 lbs weight, and that the mattress is not included. — **Figure 8.1:** Mattress requirements for optimal performance and safety.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Olela customer service directly. Details regarding warranty coverage and how to obtain support are typically included with your product packaging or available on the manufacturer's official website.

Manufacturer: Olela

Olela 14