Introduction
Thank you for purchasing the Greatnice GTS-1360 Portable Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
The GTS-1360 is a compact and versatile audio device featuring a 3-inch driver for clear sound, wireless Bluetooth connectivity, an integrated FM radio, and playback options via USB and Micro SD card. It includes a built-in rechargeable battery and a portable carry handle for convenience.
Important Safety Information
- Do not expose the speaker to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not attempt to disassemble or repair the speaker yourself. Refer all servicing to qualified personnel.
- Keep the speaker away from heat sources such as radiators, stoves, or other heat-producing appliances.
- Use only the charging cable provided or a certified equivalent.
- Clean the speaker with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Dispose of the battery and speaker according to local regulations.
Package Contents
- Greatnice GTS-1360 Portable Bluetooth Speaker
- USB Charging Cable
- User Manual
Product Overview
Familiarize yourself with the speaker's controls and ports:

This image displays the front of the Greatnice GTS-1360 speaker, highlighting its compact design and speaker grille. The control panel, typically located on the top or front, includes buttons for power, mode selection, play/pause, track navigation, and volume adjustment. The rear or side panel usually houses the charging port, USB input, and Micro SD card slot.
Setup
Charging the Speaker
Before initial use, fully charge the speaker's built-in battery.
- Connect the small end of the USB charging cable to the charging port on the speaker.
- Connect the large end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate, typically red, during charging.
- Once fully charged, the indicator light may change color or turn off. Disconnect the charging cable.
Powering On and Off
- To power on: Press and hold the Power button (often labeled with a power symbol) for a few seconds until you hear an audible prompt or see the LED lights activate.
- To power off: Press and hold the Power button again for a few seconds until the speaker powers down.
Operating Instructions
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode. If not, press the 'M' (Mode) button to switch to Bluetooth mode. The speaker will typically indicate this with an audible prompt and a flashing LED light.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "GTS-1360" from the list of found devices.
- Once paired, the speaker will provide an audible confirmation, and the LED light will stop flashing.
- You can now play audio from your device through the speaker.
Using FM Radio
- Power on the speaker and press the 'M' (Mode) button to switch to FM radio mode.
- To automatically scan and save available FM stations, press and hold the Play/Pause button. The speaker will scan and store stations.
- Use the Previous/Next track buttons to navigate between saved FM stations.
Playing from USB Drive or Micro SD Card
- Insert a USB flash drive or a Micro SD card (with audio files in supported formats) into the corresponding port on the speaker.
- The speaker should automatically switch to USB or Micro SD card mode and begin playing audio. If not, press the 'M' (Mode) button to select the correct input.
- Use the Play/Pause and Previous/Next track buttons to control playback.
Adjusting Volume
Press and hold the Previous/Next track buttons to decrease or increase the volume, respectively. A short press of these buttons will change tracks or FM stations.
LED Light Display
The speaker features an integrated LED light display. This display typically activates automatically when the speaker is powered on and can cycle through various patterns. There may be a dedicated button to toggle or change the LED light modes, if available.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the speaker's exterior. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use, to maintain battery health.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the USB charging cable. |
| No sound from the speaker. | Check the volume level on both the speaker and your connected device. Ensure the speaker is in the correct mode (Bluetooth, FM, USB/SD). |
| Bluetooth pairing fails. | Ensure the speaker is in Bluetooth pairing mode (flashing LED). Turn off and on Bluetooth on your device. Move your device closer to the speaker. |
| FM radio reception is poor. | Try repositioning the speaker. Ensure you are in an area with good FM signal strength. |
| USB/Micro SD card not playing. | Ensure the card/drive is inserted correctly. Verify that the audio files are in a supported format. Try a different USB drive or Micro SD card. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model Name | Greatnice GTS-1360 3" Portable Bluetooth Speaker with FM Radio |
| Model Number | AD-AD04032108 |
| Color | Multicolor |
| Driver Size | 3 inches |
| Connectivity | Bluetooth, USB, Micro SD Card |
| Radio | FM Radio |
| Battery | Rechargeable (Built-in) |
| Manufacturer | Family Beat |
Warranty and Support
This product is provided without a manufacturer's warranty. For any operational issues or questions not covered in this manual, please refer to the retailer where the product was purchased for support.
