GKOLED 60W (120V-12V)

Download PDF
Contents

GKOLED 60W Low Voltage Landscape Transformer User Manual

Model: 60W (120V-12V)

Brand: GKOLED

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your GKOLED 60W Low Voltage Landscape Transformer. This outdoor lighting transformer is designed to convert 120V AC household current to a safe 12V AC for low-voltage LED spot lights and path lights. It features a built-in photocell sensor, astronomic timer, and visual load display for convenient and efficient control of your landscape lighting.

2. Important Safety Information

READ ALL INSTRUCTIONS PRIOR TO INSTALLATION AND USE.

  • Disconnect power at the circuit breaker or transformer before servicing.
  • Installation prohibited within 10 feet (3M) of pools, spas, or fountains.
  • Use exclusively with specified landscape lights.
  • Install the transformer 12-48 inches (30-120 cm) above ground level.
  • Ensure the transformer is in a dry, well-ventilated location. Do not submerge.
  • Avoid operating at excessive power. Do not exceed 80% of the transformer's rated capacity to prevent overload.
  • All wiring connections must be made in parallel.
  • Installation must comply with local codes and regulations. Consult a qualified technician if unsure.
GKOLED 60W Low Voltage Landscape Transformer with important safety reminders on its label.

Image: The transformer's label displaying critical safety information and important reminders for proper use and installation.

3. Package Contents

Verify that all components are present before beginning installation:

  • 1x GKOLED 60W Low Voltage Landscape Transformer
  • 1x Screw
  • 1x Expansion Anchor
Diagram of the GKOLED 60W Low Voltage Landscape Transformer showing its components and included accessories.

Image: A detailed view of the transformer, highlighting the control panel, photo sensor, 15V AC output terminal, control buttons, 3-foot SJTW power cord, 120V power plug, and included screw and expansion anchor.

4. Product Features

  • Auto On/Off: Features a 'Dusk on Dawn off' mode with a built-in sensor for automatic light control.
  • Astronomic Timer: Pre-programmed sunrise and sunset times for 85 U.S. and 20 Canadian cities, allowing automatic adjustment based on your location without a light sensor.
  • Timer Mode: Allows setting specific on/off times for full control over your outdoor lighting schedule.
  • Visual Load Display: A built-in monitor shows real-time capacity usage with an easy-to-read bar graph.
  • Safety & Durability: Includes overload protection and a weatherproof, corrosion-resistant design.
  • Memory Function: Retains settings after power outages.
Diagram illustrating the three smart modes: Astro Mode, Photocell Mode, and Timer Mode.

Image: An overview of the three smart modes: Astro Mode for automatic adjustment based on location, Photocell Mode for dusk-to-dawn operation, and Timer Mode for scheduled on/off times.

5. Setup and Installation

5.1 Mounting the Transformer

  1. Choose a suitable outdoor location for mounting the transformer. Ensure it is 12-48 inches (30-120 cm) above ground level and protected from direct water exposure.
  2. Mark the desired mounting points on the wall or post using the transformer as a template.
  3. Drill pilot holes if necessary. Insert the expansion anchor into the drilled hole.
  4. Secure the transformer to the surface using the provided screw.
GKOLED 60W Low Voltage Landscape Transformer mounted on an outdoor wall next to a house with landscape lighting.

Image: The GKOLED transformer installed on an exterior wall, demonstrating a typical mounting scenario for outdoor landscape lighting.

5.2 Wiring Landscape Lights

  1. Ensure the total wattage of your connected low-voltage lights does not exceed 80% of the transformer's 60W capacity (i.e., 48 watts).
  2. Connect your low-voltage landscape light wires to the 12V AC output terminal on the transformer. Ensure all connections are made in parallel.
  3. Tighten the terminal screws securely to ensure good electrical contact.

5.3 Power Connection

Plug the 120V power plug into a grounded outdoor electrical outlet. The transformer is now ready for programming.

6. Operating Instructions

The transformer offers three smart operating modes: Astro Mode, Photocell Mode, and Timer Mode. These modes can also be combined.

6.1 Astro Mode

Astro Mode automatically turns lights on and off based on your geographical location's sunrise and sunset times. No external light sensor is required, making it suitable for indoor use, shaded areas, or locations with strong artificial light.

  • To activate Astro Mode, navigate through the menu using the control buttons until 'ASTRO MODE' is displayed.
  • Select your location from the pre-programmed list of U.S. and Canadian cities.
  • You can also set an offset for the on/off times or specify a duration for the lights to remain on after sunset.
Illustration of Astro Mode showing lights turning on at local sunset time and off at local sunrise time.

Image: A visual representation of Astro Mode, demonstrating how lights are automatically controlled based on local sunrise and sunset times, suitable for various environments.

6.2 Photocell Mode

Photocell Mode uses the built-in light sensor to turn your lights on at dusk and off at dawn. This mode is ideal for open outdoor spaces where the sensor can accurately detect ambient light levels.

  • To activate Photocell Mode, select 'PHOTOCELL MODE' from the menu.
  • Ensure the photocell sensor on the transformer is not obstructed and receives adequate ambient light.
Illustration of Photocell Mode showing a landscape light turning on at dusk and off at dawn.

Image: A depiction of Photocell Mode, illustrating how a landscape light activates when it gets dark and deactivates when it becomes light, based on sensor detection.

6.3 Timer Mode

Timer Mode allows you to set specific times for your lights to turn on and off, providing precise control over your lighting schedule.

  • Select 'TIMER MODE' from the menu.
  • Use the control buttons to set the desired ON time and OFF time.
Illustration of Timer Mode showing a landscape light turning on at 7:00 P.M. and off at 06:35 A.M.

Image: A visual guide to Timer Mode, showing how lights can be programmed to turn on and off at specific user-defined times.

6.4 Combining Modes

Astro Mode and Photocell Mode can be used in combination with Timer Mode to create more complex lighting schedules.

Table showing suitable modes for various scenarios: Indoor, Open Outdoor Space, Shaded Areas, Under Strong Artificial Light.

Image: A compatibility chart indicating which operating modes (Astro, Photocell, Timer) are suitable for different environmental scenarios, including indoor, open outdoor, shaded, and strong artificial light conditions.

7. Load Monitoring

The transformer features an innovative visual load display that shows the real-time power consumption of your connected lights. This helps you manage your power usage and avoid overloading the unit.

  • The display shows a bar graph indicating the percentage of capacity consumed.
  • If the load exceeds 100% of capacity, the transformer will automatically turn off to prevent damage.
  • It is recommended to keep the total load below 80% of the transformer's rated capacity (48W for this 60W model).
Diagram illustrating the load monitoring display on the transformer, showing 20%, 100%, and 120% capacity consumed scenarios.

Image: The load monitoring feature, demonstrating how the display indicates power consumption at 20%, 100%, and 120% of capacity, with a warning for overload.

8. Maintenance

  • Cleaning: Periodically wipe the transformer's exterior with a soft, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
  • Inspection: Regularly check the power cord and low-voltage wiring for any signs of damage, fraying, or loose connections.
  • Photocell Sensor: Ensure the photocell sensor (if used) remains clear of obstructions like leaves or dirt to maintain accurate dusk-to-dawn operation.
  • Winterization: While weatherproof, consider protecting the transformer from extreme winter conditions if possible, or ensure it is securely mounted and connections are sealed.

9. Troubleshooting

Problem Possible Cause Solution
Lights do not turn on.
  • No power to transformer.
  • Incorrect mode setting.
  • Loose wiring connections.
  • Overload protection activated.
  • Faulty lights.
  • Check power outlet and circuit breaker.
  • Verify correct operating mode (Astro, Photocell, Timer).
  • Inspect and tighten all wiring connections.
  • Check load display; reduce connected wattage if overloaded.
  • Test lights individually.
Lights stay on/off constantly.
  • Photocell sensor obstructed (in Photocell Mode).
  • Incorrect time/location setting (in Astro/Timer Mode).
  • Clear obstructions from photocell sensor.
  • Verify and adjust time, location, or schedule settings.
Load display shows overload.
  • Total wattage of lights exceeds capacity.
  • Disconnect some lights to reduce the total wattage below 48W.

10. Specifications

  • Brand: GKOLED
  • Model: 60W (120V-12V)
  • Input Voltage: 120V AC, 60Hz
  • Output Voltage: 12V AC
  • Wattage: 60W
  • Dimensions (D x W x H): 2.78" x 3.48" x 6.61"
  • Power Source: Corded Electric
  • Mounting Type: Wall Mount
  • Certifications: ETL Listed
Diagram showing the dimensions of the GKOLED 60W Low Voltage Landscape Transformer: 3.48 inches width, 2.78 inches depth, and 6.61 inches height.

Image: Detailed dimensions of the transformer, indicating its width, depth, and height for installation planning.

11. Warranty and Support

This GKOLED product is covered by a 2-year warranty from the date of original purchase. This warranty ensures reliability and performance under normal use conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact GKOLED customer service. Refer to the contact information provided with your purchase or visit the official GKOLED website.

Manufacturer: GKOLED

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.