Introduction
Thank you for choosing the WZATCO Legend GT Google TV Projector. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your projector. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Figure 1: WZATCO Legend GT Projector
Setup
Follow these steps to set up your WZATCO Legend GT projector for the first time.
1. Unpacking and Placement
- Carefully remove all components from the packaging. Ensure all items listed in the 'Box Contents' section are present.
- Place the projector on a stable, flat surface. For optimal viewing, position the projector between 5 to 20 feet from the projection surface. The maximum image size is 300 inches.
- Ensure adequate ventilation around the projector. Do not block air vents.
2. Power Connection
- Connect the provided power cord to the projector's power input and then to a suitable electrical outlet (220 Volts).
- Press the power button on the projector or remote control to turn on the device.
3. Initial Configuration and Automatic Adjustments
The Legend GT features intelligent sensors for automatic setup:
- Auto Focus: The projector will automatically adjust for instant sharpness.
- Auto Keystone: Image distortion will be automatically corrected for a perfect rectangular projection.
- Auto Screen Fit: The projection will automatically adjust to fit within your screen boundaries.
Figure 2: Auto Focus in action, ensuring clear visuals.
Figure 3: Auto Keystone automatically corrects image angles.
Figure 4: Auto Screen Fit adjusts the image to screen boundaries.
4. Connectivity
The projector offers various connectivity options:
- Wi-Fi: Connect to your home network using the dual-band Wi-Fi (2.4G + 5.8G) for streaming and online features.
- Bluetooth 5.0: Pair with external Bluetooth speakers or headphones for enhanced audio.
- HDMI: Connect external devices like gaming consoles, laptops, or streaming sticks using the HDMI port.
- USB: Connect USB drives for media playback.
- 3.5mm Audio: Connect external audio systems via the audio jack.
Figure 5: Dual-Band Wi-Fi for stable streaming.
Figure 6: Bluetooth 5.0 for wireless audio connections.
Operating Instructions
1. Google TV Interface
The WZATCO Legend GT runs on official Google TV, providing access to a wide range of applications and content. Navigate the interface using the provided remote control.
Figure 7: The Google TV home screen with various streaming apps.
2. Streaming Applications
Enjoy high-resolution streaming from certified apps like Netflix, Prime Video, Zee5, SonyLIV, and Hotstar, thanks to Widevine L1 certification.
3. Google Assistant Voice Control
Use the Bluetooth remote control to activate Google Assistant. Speak commands to search for content, control playback, and manage smart home devices.
Figure 8: Using Google Voice Assistant for hands-free control.
4. Chromecast Built-in
Seamlessly cast movies, TV shows, photos, music, and presentations directly from your Android, iPhone, tablet, or laptop to the projector without additional devices.
Figure 9: Chromecast Built-in for easy content sharing.
5. Audio Output
The projector features dual high-power 10W Hi-Fi speakers with a passive bass radiator, delivering a total of 20W audio output. For external audio, use Bluetooth or the 3.5mm audio jack.
Figure 10: Integrated 20W Stereo Speakers for immersive sound.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your projector.
1. Sealed Optical Engine
The Legend GT features an Advanced Sealed Optical Engine, which significantly reduces dust buildup. This design contributes to long-lasting clarity and minimizes the need for internal cleaning.
Figure 11: The Sealed Optical Engine prevents dust accumulation.
2. General Cleaning
- Exterior: Use a soft, dry cloth to wipe the exterior of the projector. Avoid abrasive cleaners or solvents.
- Lens: Gently clean the projector lens with a lens cleaning cloth or specialized lens cleaning solution. Do not touch the lens with your fingers.
- Vents: Periodically check and clean the air vents to ensure proper airflow and prevent overheating. Use a soft brush or compressed air.
Troubleshooting
If you encounter issues with your projector, refer to the following common solutions:
- No Image or Distorted Image:
- Ensure the projector is powered on and connected correctly to the input source.
- Check the input source selection in the projector's menu.
- If the image is blurry or out of focus after moving the projector, try turning the projector off and then on again to re-engage the auto-focus function.
- Verify that the projection surface is flat and clear.
- No Sound:
- Check the volume settings on the projector and the connected source device.
- Ensure external speakers (if used) are properly connected and powered on.
- If using Bluetooth audio, ensure the device is correctly paired and selected as the output.
- Remote Control Not Working:
- Replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the projector.
- For Bluetooth remotes, ensure it is paired with the projector.
- Wi-Fi Connectivity Issues:
- Ensure your Wi-Fi router is working correctly and within range.
- Restart the projector and your Wi-Fi router.
- Check Wi-Fi settings on the projector to ensure the correct network is selected and the password is entered accurately.
Specifications
| Feature | Specification |
|---|---|
| Brand | WZATCO |
| Model Name | Legend GT |
| Model Number | WZ-X4 |
| Display Resolution | Native 1920 x 1080 (Full HD) |
| Maximum Display Resolution | 1920 x 1080 Pixels |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 20000:1 Pixels |
| Light Source Operating Life | 50000 Hours |
| Speakers | 20W Dual Hi-Fi Speakers with Passive Bass Radiator |
| Operating System | Official Google TV |
| Connectivity Technology | Wi-Fi (Dual-Band), Bluetooth 5.0 |
| Hardware Connectivity | HDMI, USB, 3.5mm Audio |
| Special Features | Auto Focus, Auto Keystone, Auto Screen Alignment, Built-In Cooling System, Sealed Engine, Chromecast Built-in, Google Assistant |
| Maximum Image Size | 300 Inches |
| Throw Distance (Min/Max) | 5 feet / 20 feet |
| Item Dimensions (L x W x H) | 25L x 21W x 18H Centimeters |
| Item Weight | 3.1 Kilograms |
| Voltage | 220 Volts |
| Box Contents | Projector, HDMI Cable, Power Cord, Remote |
Warranty Information
The WZATCO Legend GT projector comes with a 1-Year Manufacturer Warranty from the date of purchase. To avail warranty benefits, product registration is mandatory. Please visit the official WZATCO website for additional details and to complete your product registration.
Figure 12: WZATCO 1-Year Warranty for peace of mind.
Customer Support
For any queries, technical assistance, or warranty claims, please contact WZATCO customer support:
- Importer: Zeblaze Solutions LLP
- Address: #731, 3rd Floor, 4th phase, Yelahanka, New Town Bangalore - 560064
- Customer Care: 080-7097-7097
- Email: support@wzatco.com
Product Videos
No official product videos from the seller were available for embedding at this time.
