Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your LEIVI B101-01 Electric Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Safety Precautions
- Ensure the bidet seat is connected to a grounded GFCI (Ground Fault Circuit Interrupter) outlet.
- Do not immerse the product in water or spray water directly onto the main unit.
- Unplug the unit before cleaning or performing any maintenance.
- Do not allow children or individuals with reduced physical, sensory, or mental capabilities to operate the bidet without supervision.
- Avoid using abrasive cleaners or harsh chemicals on the bidet seat.
Package Contents
Verify that all components are present before beginning installation:
- LEIVI B101-01 Electric Bidet Toilet Seat
- Mounting Hardware Kit
- Wireless Remote Control
- T-adapter for Water Supply
- Water Supply Hose
- User Manual (this document)
Setup and Installation
The LEIVI B101-01 Electric Bidet Toilet Seat is designed for standard elongated toilets. Ensure your toilet dimensions are compatible before installation. A 120V GFCI electrical outlet is required near the toilet.
1. Confirm Toilet Size
Measure your toilet to ensure compatibility. This model is designed for elongated toilets with a bolt hole spacing of 5.5"-7.5" (140-190mm) and a bowl length of 18"-19.5" (477-495mm) from the bolt holes to the front rim.
Image: Toilet size compatibility diagram. Confirm your toilet matches the elongated dimensions shown.
2. Installation Steps
- Prepare the Toilet: Close the water supply valve to your toilet and flush to drain the tank completely. Remove your existing toilet seat.
- Install Mounting Plate: Secure the provided mounting plate to the toilet bowl using the included hardware. Adjust the plate position to align with the toilet bowl.
- Attach Bidet Seat: Slide the electric bidet seat onto the mounting plate until it clicks securely into place.
- Connect Water Supply: Install the T-adapter to the fill valve inlet of your toilet. Connect one end of the water supply hose to the T-adapter and the other end to the bidet seat's water inlet. Ensure all connections are tight to prevent leaks.
- Connect Power: Plug the bidet seat's power cord into a grounded 120V GFCI electrical outlet.
- Restore Water Supply: Slowly open the toilet's water supply valve and check for any leaks.
Image: Step-by-step installation guide for the LEIVI B101-01 bidet seat.
Operating Instructions
The LEIVI B101-01 offers various functions controlled by the wireless remote or the side knob. Wash functions activate only when the seat sensor detects a seated user.
1. Automatic Lid Operation
The bidet seat features an automatic lid that opens when a user approaches and closes after the user leaves, reducing direct contact.
Image: Automatic lid opening feature.
Image: Automatic lid closing feature.
2. Wireless Remote Control
Use the wireless remote to access all functions. The remote can be wall-mounted or used handheld.
Image: Wireless remote control layout and functions.
3. Digital LED Display
The built-in LED screen on the bidet seat displays real-time seat and water temperatures, along with an energy-saving indicator.
Image: LED digital display showing temperature settings.
4. Wash Functions
- Rear Wash: Provides a thorough posterior cleansing.
- Feminine Wash: Gentle front wash for feminine hygiene.
- Oscillating Wash: The nozzle moves back and forth for a wider cleaning area.
- Micro Bubble Wash: Infuses water with air bubbles for a softer, more effective wash.
- Adjustable Water Temperature: Four levels of warm water temperature adjustment.
- Adjustable Water Pressure: Control the intensity of the water spray.
- Nozzle Position Adjustment: Adjust the nozzle's position for personalized cleaning.
Image: Visual representation of heated seat, warm air dry, instant warm water, and various wash modes.
5. Drying Function
After washing, use the warm air dryer to reduce toilet paper usage. The wind temperature is adjustable to four levels.
6. Heated Seat
The seat provides adjustable warmth for comfort, with four temperature levels.
7. Night Light
An automatic night light senses ambient light and illuminates the toilet bowl, providing visibility in the dark.
Maintenance
Regular maintenance ensures optimal performance and hygiene of your bidet seat.
1. Nozzle Cleaning
The bidet features an automatic self-cleaning function for the nozzle, which activates before and after each use. For manual cleaning, extend the nozzle and gently wipe with a soft cloth and mild detergent.
2. Seat Cleaning
The bidet seat has a quick-release button for easy removal from the mounting plate, allowing for thorough cleaning of both the seat and the toilet bowl. Use a soft cloth and a mild, non-abrasive bathroom cleaner. Do not use harsh chemicals or abrasive pads.
3. Water Filter
The visible filtration system allows you to monitor the filter's condition. Replace the water filter periodically, especially in areas with hard water, to prevent mineral buildup and maintain water quality.
Image: Features including auto night light, visible filtration, quick release, and IPX4 waterproof design.
Troubleshooting
If you encounter issues with your LEIVI B101-01 bidet seat, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Unit not turning on | Power cord unplugged, GFCI tripped, no power to outlet. | Check power connection, reset GFCI outlet, test outlet with another device. |
| No water spray/Weak spray | Water supply valve closed, water filter clogged, nozzle blocked. | Ensure water supply valve is fully open, replace water filter, clean nozzle. |
| Water not warm | Water heater setting too low, heater malfunction. | Adjust water temperature setting on remote, ensure bidet is powered. |
| Seat not heated | Heated seat function off, temperature setting too low. | Turn on heated seat function, adjust seat temperature setting. |
| Lid not opening/closing automatically | Sensor obstructed or dirty, power issue. | Clean the sensor area, ensure unit has power. |
| Remote control not working | Batteries depleted, remote out of range, signal obstruction. | Replace remote batteries, ensure clear line of sight to bidet, move closer. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | B101-01 |
| Brand | LEIVI |
| Color | White |
| Material | Polypropylene (PP) |
| Shape | Oval (Elongated) |
| Operation Mode | Automatic |
| Power Supply | 120V AC (GFCI outlet recommended) |
| Water Temperature | Adjustable (4 levels) |
| Seat Temperature | Adjustable (4 levels) |
| Air Dryer Temperature | Adjustable (4 levels) |
| Waterproof Rating | IPX4 |
| Included Components | Electric Bidet Toilet Seat, Mounting Hardware, Remote Control, User Manual |
| UPC | 768152737754 |
Warranty Information
For detailed warranty information, please refer to the warranty card included with your product or visit the official LEIVI website. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
If you have any questions, require technical assistance, or need to report an issue, please contact LEIVI customer support through the contact information provided on the official LEIVI website or your purchase documentation.