Introduction
Welcome to an enhanced pool experience with the PoolCandy Splash Runner Pro 2.0 Motorized Pool Lounger. This manual provides essential information for the safe and effective use of your motorized float. It covers assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your product.
The Splash Runner Pro 2.0 is powered by dual 66-watt motors, offering smooth and easy navigation in your pool or lake. Its intuitive controls allow for effortless gliding and movement in any direction, transforming your relaxation into an adventure.
Safety Information
- Adult Supervision: Always supervise children when the motorized lounger is in use. This product is designed for teens and adults.
- Water Conditions: Do not use in strong currents, open waters, or areas with heavy boat traffic. Intended for calm pool or lake environments.
- Propeller Safety: Ensure propellers are clear of obstructions and body parts before and during operation. The propellers are securely shielded behind a safety grill.
- Weight Capacity: Do not exceed the maximum weight capacity of 350 pounds. Overloading can affect performance and safety.
- Battery Handling: Keep the battery compartment dry and secure. Always use the specified D-Cell batteries and ensure correct polarity. Remove batteries when the lounger is not in use for extended periods.
- Inflation: Do not over-inflate the lounger. Inflate until firm but not rigid.
- Electrical Components: Do not attempt to modify or repair the motorized components. Contact support for assistance.
What's in the Box
Your PoolCandy Splash Runner Pro 2.0 package includes:
- 1 x Motorized Pool Lounger (inflatable body with integrated motor units)
Setup
- Unpack: Carefully remove all components from the packaging.
- Inflate: Locate the air valves on the lounger. Use an air pump (not included) to inflate the lounger until it is firm to the touch but not over-inflated. The design allows for easy inflation.
- Battery Installation: The lounger requires 16 D-Cell batteries (not included). Locate the battery compartments on the motor units. Open the compartments, insert the batteries according to the polarity indicators, and securely close the covers. Ensure the covers are tightly sealed to prevent water intrusion.
- Motor Attachment (if separate): If the motor units are separate, attach them securely to the designated areas on the lounger. This is a simple, tool-free assembly process.
Image: The fully inflated PoolCandy Splash Runner Pro 2.0 ready for use in a pool.
Operating Instructions
- Enter the Lounger: Carefully sit on the lounger in the water.
- Activate Motors: Locate the joystick controls on either side of the lounger. Press the power button (if applicable) to activate the motors.
- Steering: Use the dual joystick controls to navigate. Pushing both joysticks forward will move the lounger forward. Pulling both back will move it backward. Pushing one forward and pulling the other back will allow for 360-degree rotation. Experiment with the controls to master smooth gliding and turning.
- Utilize Features: The lounger includes a backrest, lower-back support, and a handy cupholder. A phone holder is also integrated, designed to fit most waterproof devices.
Image: Operating the joystick controls and using the integrated cupholder.
Image: The integrated phone holder for waterproof devices.
Video: Official demonstration of the Splash Runner Pro 2.0 motorized pool lounger in action, showcasing its 360-degree movement and ease of control.
Maintenance
- Cleaning: After each use, rinse the lounger with fresh water and wipe it clean. The durable PVC material dries fast.
- Drying: Ensure the lounger is completely dry before deflating and storing to prevent mold or mildew.
- Storage: Deflate the lounger and fold it neatly. Store in a cool, dry place away from direct sunlight and sharp objects.
- Battery Care: Remove D-Cell batteries from the motor compartments if the lounger will not be used for an extended period. This prevents corrosion and extends battery life.
- Inspection: Periodically inspect the lounger for any signs of wear, punctures, or damage to the motor units and propeller guards.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor not working or weak | Dead or improperly installed batteries; water in battery compartment; motor obstruction. | Check and replace batteries, ensuring correct polarity. Ensure battery compartment is dry and sealed. Check propellers for debris and clear if necessary. |
| Difficulty steering straight or 360-degree movement issues | Uneven motor power; joystick malfunction; strong water currents. | Ensure both motor units are functioning equally. Check joysticks for smooth movement. Use in calm water conditions. |
| Lounger deflates quickly | Air valve not properly sealed; puncture in inflatable material. | Ensure all air valves are securely closed. Inspect the lounger for punctures and repair with a patch kit (not included) if found. |
| Lounger moves too slowly | Low battery power; exceeding weight capacity. | Replace batteries with fresh D-Cells. Ensure user weight does not exceed 350 pounds. |
Specifications
- Model Number: PC4225SR-F
- Product Dimensions: 66"L x 43"W
- Size: Large (66x43x19 inches)
- Item Weight: 12 pounds
- Material: Premium 0.35mm PVC Plastic
- Weight Capacity: Up to 350 pounds
- Age Range: Teen, Adult
- Power Source: 16 D-Cell batteries (not included)
- Motors: Dual 66-watt motors
- Special Features: Easy to inflate, Motorized, Backrest, Lower-back support, Cupholder, Phone holder
- Personal Flotation Device Type: Buoyancy Aid
- UPC: 814092027162
- Manufacturer: B&D GROUP
Warranty
The PoolCandy Splash Runner Motorized Pool Lounger comes with a worry-free One-Year warranty provided by B&D Group. This warranty covers manufacturing defects and ensures confidence in your purchase. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, product inquiries, or warranty claims, please visit the official Poolcandy Store or contact customer service:
