1. Introduction
Thank you for choosing the VASAGLE LBC126K101 Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read it thoroughly before use and retain it for future reference.
Image 1.1: VASAGLE LBC126K101 Bar Stools in a kitchen environment.
The VASAGLE LBC126K101 Bar Stools are designed for comfortable seating at kitchen islands or bar counters. This set of two stools features an ergonomic curved backrest, a high-density foam cushion, and a sturdy construction with solid rubberwood legs and a steel footrest, ensuring stability and durability.
Image 1.2: Key features including solid wood legs, PU upholstery, and metal footrest.
2. Safety Instructions
- Maximum Load Capacity: Do not exceed the maximum static load capacity of 150 kg (330 lbs) per stool.
- Assembly: Ensure all parts are correctly assembled and all screws are tightened before use. Periodically check and re-tighten screws as needed.
- Stable Placement: Place the stools on a flat, stable surface to prevent tipping.
- Avoid Standing: Do not stand on the stools. They are designed for seating only.
- Children: Supervise children when they are near or using the stools.
- Moving: Use the hidden handle on the backrest to move the stools. Do not drag them, as this may damage the legs or floor.
3. Package Contents
Before assembly, please verify that all components listed below are present and undamaged.
- 2 x Bar Stool (unassembled)
- 1 x Hardware Pack (screws, washers, Allen key, etc.)
- 1 x Instruction Manual (this document)
4. Setup and Assembly
Assembly of the VASAGLE LBC126K101 Bar Stools is required. For detailed, step-by-step instructions, please refer to the official installation manual:
Download Installation Manual (PDF)
General Assembly Tips:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all parts using the provided parts list in the PDF manual.
- Follow the assembly steps in the PDF manual sequentially.
- Do not overtighten screws during initial assembly; tighten them fully once the stool is upright and stable.
5. Operating Instructions
Using your VASAGLE Bar Stools is straightforward. Follow these guidelines for optimal use:
- Seating: Sit centrally on the seat cushion to distribute weight evenly. The ergonomic curved backrest provides comfortable support.
- Footrest: Utilize the integrated steel footrest for added comfort and stability, especially during prolonged sitting.
- Movement: When moving the stools, lift them slightly using the hidden handle on the backrest to avoid scratching floors or damaging the legs.
Image 5.1: Ergonomic curved backrest for comfortable seating.
6. Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning the PU Upholstery: Wipe the polyurethane (PU) seat and backrest with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Wood Care: Clean the solid rubberwood legs with a soft, dry cloth. Avoid direct sunlight and excessive moisture to prevent warping or fading.
- Metal Footrest: Wipe the steel footrest with a damp cloth and dry thoroughly to prevent rust.
- Hardware Check: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability.
Image 6.1: The breathable and wear-resistant PU cushion is easy to maintain.
7. Troubleshooting
If you encounter any issues with your bar stools, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles or is unstable. | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the stool is on a flat surface. |
| Difficulty assembling. | Incorrect part orientation or missing hardware. | Refer to the detailed PDF installation manual. Verify all parts are correctly oriented and all hardware is present. |
| Scratches on floor when moving. | Stool dragged instead of lifted. | Always lift the stool using the hidden handle when moving it. Consider adding felt pads to the bottom of the legs. |
8. Specifications
Image 8.1: Detailed dimensions of the VASAGLE LBC126K101 Bar Stool.
| Feature | Detail |
|---|---|
| Model Number | LBC126K101 |
| Overall Dimensions (W x D x H) | 50 x 51.5 x 95.5 cm (19.7 x 20.3 x 37.6 inches) |
| Seat Height | 65.5 cm (25.8 inches) |
| Seat Width | 50 cm (19.7 inches) |
| Backrest Height | 24 cm (9.4 inches) |
| Weight per Stool | Approx. 7.4 kg (16.3 lbs) |
| Maximum Static Load Capacity | 150 kg (330 lbs) |
| Material | Solid Rubberwood, Plywood, Polyurethane (PU) Upholstery, Steel |
| Color | Caramel Brown |
| Quantity | Set of 2 |
| Assembly Required | Yes |
| UPC | 194343677361 |
Note: All dimensions are approximate and may vary slightly.
9. Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact VASAGLE customer service directly. Refer to the contact information provided with your purchase or visit the official VASAGLE website.
Online Resources:
- Official VASAGLE Store: VASAGLE Store on Amazon
