1. Introduction
The Viconor Hair Growth System Laser Cap is a low-level laser therapy (LLLT) device designed for the promotion of hair growth. This device is FDA cleared for use in females with androgenetic alopecia (Ludwig-Savin Classifications I-II) and males with androgenetic alopecia (Norwood Hamilton Classifications IIa-V), for Fitzpatrick Skin Phototypes I-IV.
It utilizes red visible light diode lasers operating at a 650nm wavelength with a maximum output power of 5mW per laser, a clinically validated wavelength for LLLT. The hands-free and portable design features lasers arranged in a dot matrix configuration to ensure comprehensive coverage of hair follicles across the scalp.

Image: A woman wearing the Viconor laser cap, illustrating the device's application. Below are comparative images showing hair density before and after use, indicating a 46% increase in hair count in 16 weeks based on a double-blind study.
2. Safety Information
Please read all safety instructions carefully before using the Viconor Hair Growth System Laser Cap. Failure to follow these instructions may result in injury or device malfunction.
2.1 Important Warnings
- Do not look directly into the laser light. Direct eye exposure to laser radiation may cause eye injury.
- Keep out of reach of children.
- Do not use if you are pregnant or breastfeeding.
- Consult a physician before use if you have any medical conditions, are taking photosensitizing medications, or have a history of skin cancer.
- The device is equipped with a safety-focused design that automatically pauses therapy if the user's head moves outside the radiation zone, preventing accidental eye exposure.
2.2 Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This device is intended for hair growth promotion as indicated by its FDA clearance.
3. Product Components and Features
The Viconor Hair Growth System Laser Cap includes the following main components and features:
- Laser Cap Unit: The main helmet containing the laser diodes.
- Controller Unit: For power, time, and mode adjustments.
- Power Cable: For connecting to a power source.
- Adjustable Sizing Mechanism: Allows for a comfortable and secure fit for various head sizes (21.2" - 26").
- Ventilation System: Features 14 precision vents for breathability.
- Sealed Transparent Protective Layer: Easy to clean and prevents hair pulling.

Image: Internal view of the laser cap, highlighting the 650nm laser therapy diodes designed for deep penetration and stimulation of hair follicles.

Image: The sealed transparent protective layer of the Viconor cap, designed for easy cleaning and to prevent hair entanglement.

Image: Illustration of the cap's 9-vent duct design, indicating airflow for enhanced breathability and comfort during use.
4. Setup
4.1 Adjusting the Fit
- Place the laser cap on your head.
- Locate the adjustment knob at the back of the cap.
- Rotate the knob to adjust the cap's circumference until it fits snugly and comfortably on your head. The cap is adjustable for head sizes between 21.2 inches and 26 inches.

Image: Detailed view of the adjustable knob, demonstrating how to customize the cap's fit for various head shapes.
4.2 Connecting Power
The device supports two power supply modes:
- Wall Power Supply: Connect the provided power cable to the cap and then to a standard wall outlet.
- Portable Power Bank: For mobile use, connect the cap to a compliant portable power bank using the matching USB cable (included).

Image: Illustration of the two power supply options: direct wall power and connection to a portable power bank for flexible use.
5. Operation
The Viconor Hair Growth System Laser Cap is controlled via a remote unit with easy-to-use buttons.
5.1 Controller Functions

Image: The remote control unit, detailing the display window and buttons for power (Switch), time adjustment, and mode selection.
- Display Window: Shows current settings.
- Switch Button: Powers the device on/off.
- Time Button: Adjusts the therapy duration. Available settings typically include 0min, 5min, 10min, 15min, 20min, 25min, 30min.
- Mode Button: Selects different therapy modes (if applicable, specific modes not detailed in provided data).
5.2 Recommended Usage
It is recommended to use the device for 30 minutes each time, three times a week, on alternate days. Consistent use is key for optimal results.

Image: Expected results timeline, showing initial reduction of hair loss (0-3 months), visible increased hair growth (4-8 months), and most noticeable results with continued use (8-12 months).

Image: A diagram illustrating the process of hair regrowth through laser therapy, showing how LLLT stimulates cell metabolism and revitalizes hair follicles.
6. Maintenance
6.1 Cleaning the Device
The Viconor Hair Growth System Laser Cap features a sealed transparent protective layer for easy cleaning.
- Ensure the device is powered off and disconnected from any power source before cleaning.
- Gently wipe the inner and outer surfaces of the cap with a soft, damp cloth.
- Do not use abrasive cleaners or immerse the device in water.
- Allow the device to air dry completely before storage or next use.
6.2 Storage
Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter any issues with your Viconor Hair Growth System Laser Cap, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly connected to power source; power source issue. | Ensure the power cable is securely connected to both the cap and the power source. Try a different outlet or power bank. |
| Lasers do not activate. | Safety sensor not engaged; device not positioned correctly. | Ensure the cap is worn correctly and fully seated on your head. The device has a smart protection system that pauses therapy if not properly worn. |
| Cap feels uncomfortable. | Improper fit. | Adjust the sizing knob to achieve a comfortable and snug fit. The cap comes with sponge pads of different thicknesses for customization. |
If the problem persists, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | B0H3NMZ5TW |
| Laser Wavelength | 650nm |
| Laser Output Power | 5mW per laser |
| FDA Clearance | Yes, for androgenetic alopecia (Ludwig-Savin Classifications I-II for females, Norwood Hamilton Classifications IIa-V for males), Fitzpatrick Skin Phototypes I-IV. |
| Adjustable Head Size | 21.2 - 26 inches |
| Power Supply | Wall power or portable power bank (USB) |
| Package Dimensions | 14.48 x 12.95 x 7.24 inches |
| Item Weight | 2.8 pounds |
| Manufacturer | DIKAKU INDUSTRIAL CO.,LIMITED |
| Date First Available | June 2, 2026 |
9. Warranty and Support
For any questions, technical assistance, or after-sales support regarding your Viconor Hair Growth System Laser Cap, please contact our customer service team. Details for contacting support are typically found on the product packaging or the official Viconor website.
Please retain your proof of purchase for warranty claims. Specific warranty terms and conditions may apply.