Introduction
The Gotopceed Shower Speaker Light (Model CY-01-HV) is designed to enhance your bathroom experience with integrated audio and customizable lighting. This device features a Bluetooth speaker, 16 RGB color options, dynamic wave projection, and built-in nature sounds. Its splash-proof design ensures reliable performance in humid environments. Please read this manual thoroughly before use to ensure proper operation and longevity of your product.
Package Contents
Verify that all items are present in the package:
- Gotopceed Shower Speaker Light Unit
- Remote Control (with 2 AAA batteries included)
- USB-A to USB-C Charging Cable
- Textured Lampshade (pre-attached or separate)
- Smooth White Lampshade (optional, if included)
- Instruction Manual (this document)
Product Features
- Bluetooth Speaker & 4 Calming Soundscapes: Connect your smartphone via Bluetooth for music or podcasts. Enjoy 4 pre-set nature sounds: gentle rain, soft stream, tranquil underwater ambience, and white noise.
- Splash-Proof Construction: Engineered to withstand humid bathroom air, splashes, and steam.
- 2-in-1 Lighting Modes: Use the elegant textured lampshade for a warm, diffused ambient glow, or detach it for a mesmerizing moving ripple projection.
- 16 Vibrant Hues & Dynamic Flowing Effects: Choose from 16 colors and combine with wave motion for captivating visual rhythms.
- Intuitive Dual-Control System: Operate via the responsive built-in touch sensor or the included remote control.
Setup
1. Initial Charging
Before first use, fully charge the device. Connect the USB-C end of the charging cable to the speaker light and the USB-A end to a standard USB power adapter (not included). The charging indicator light will show charging status. A full charge typically takes 3-4 hours.
Image: The speaker light connected to a USB charger, illustrating the charging process and battery life information.
2. Attaching/Detaching Lampshade
The device comes with a textured lampshade. For a diffused ambient glow, ensure the lampshade is securely attached. To activate the dynamic wave projection, gently remove the lampshade.
Image: The speaker light showcasing its two lighting modes: projection mode (lampshade removed) and ambient glow mode (lampshade attached).
Operating Instructions
1. Power On/Off
- Touch Sensor: Press and hold the power button on the device for 2 seconds to turn on or off.
- Remote Control: Press the power button on the remote control.
2. Bluetooth Pairing
- Ensure the speaker light is powered on.
- On your smartphone or Bluetooth-enabled device, navigate to Bluetooth settings.
- Select "CY-01-HV" from the list of available devices.
- Once paired, the device will emit an audible confirmation.
Image: The speaker light playing music via Bluetooth, with a phone displaying a music app and an option for white noise.
3. Light Modes and Color Selection
- Changing Colors: Use the color selection buttons on the remote control or tap the touch sensor on the device to cycle through 16 static colors.
- Dynamic Wave Projection: Remove the lampshade to activate the ripple projection effect.
- Brightness Adjustment: Use the dimming buttons on the remote control to adjust light intensity.
Image: The speaker light showcasing its 16 color options and dynamic light effects.
4. Audio Modes
- Bluetooth Speaker: Once paired, audio from your connected device will play through the speaker.
- Nature Sounds/White Noise: Use the dedicated buttons on the remote control to select from the 4 built-in calming soundscapes.
5. Controls
The device can be controlled via its built-in touch sensor or the included remote control.
- Touch Sensor: Located on the front of the device. Tap to change light colors, press and hold for power on/off.
- Remote Control: Provides full control over power, light modes (RGBW), dimming, audio modes (Music, White Noise), and timer functions.
Image: A user interacting with the touch control panel on the speaker light.
Image: The remote control in use, highlighting its functions for music, white noise, RGB+CCT, dimming, and lighting modes.
6. Timer Function
Use the timer button on the remote control to set an automatic shut-off time for the device.
Charging
When the battery is low, the device may indicate this with a flashing light or reduced performance. Connect the provided USB-C cable to the charging port on the device and to a 5V/1A USB power source. A full charge provides approximately 5-10 hours of battery life, depending on usage (light intensity, volume, etc.).
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store in a cool, dry place when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge regularly.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Connect to a power source and try again.
- Bluetooth pairing issues:
- Ensure the device is in pairing mode (usually indicated by a flashing light).
- Turn off and on your smartphone's Bluetooth.
- Ensure the speaker light is within range (typically 10 meters/33 feet).
- Forget the device from your phone's Bluetooth list and attempt to pair again.
- No sound: Check the volume on both the speaker light and your connected Bluetooth device. Ensure Bluetooth is properly connected.
- Remote control not working: Check if the AAA batteries in the remote control need replacement. Ensure there are no obstructions between the remote and the device.
- Light not changing colors/projecting: Ensure the lampshade is correctly positioned for the desired effect. If using the remote, ensure it is pointed at the device.
Specifications
| Feature | Detail |
|---|---|
| Model Number | CY-01-HV |
| Product Dimensions | 4.1"D x 4.1"W x 4.6"H |
| Item Weight | 8.8 ounces |
| Light Source Type | LED |
| Number of Light Sources | 1 |
| Connectivity Protocol | Bluetooth |
| Is Waterproof | Yes (Splash-Proof) |
| Additional Features | Rechargeable |
| Battery Life | 5-10 hours (approx.) |
| Charging Time | 3-4 hours (approx.) |
| Material Type | Plastic |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
This Gotopceed Shower Speaker Light comes with a 2-year manufacturer's warranty. For warranty claims, technical support, or any inquiries, please refer to the contact information provided on the product packaging or the official Gotopceed website. Please retain your proof of purchase for warranty validation.