BUGANI M172BC

BUGANI M172BC 120W Bluetooth Speaker User Manual

Model: M172BC

Introduction

Thank you for choosing the BUGANI M172BC 120W Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

BUGANI M172BC 120W Bluetooth Speaker

Image: Front view of the BUGANI M172BC 120W Bluetooth Speaker, showcasing its design and speaker components.

What's in the Box

Upon unboxing, please verify that all items listed below are present:

  • BUGANI M172BC 120W Bluetooth Speaker × 1
  • USB-C Charging Cable × 1 (Assumed, based on charging method)
  • User Manual × 1

Setup

1. Charging the Speaker

Before initial use, fully charge the speaker. Connect the provided USB-C charging cable to the speaker's charging port and to a compatible USB power adapter (not included). The charging indicator will show the charging status. A full charge typically takes approximately 2 hours.

2. Powering On/Off

  • To Power On: Press and hold the Power button for a few seconds until the indicator light illuminates and an audible prompt is heard.
  • To Power Off: Press and hold the Power button again for a few seconds until the indicator light turns off and an audible prompt is heard.

3. Bluetooth Pairing

The speaker uses Bluetooth 5.3 for a stable wireless connection.

  1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED).
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "BUGANI M172BC" from the list of devices.
  4. Once connected, the speaker will provide an audible confirmation, and the LED indicator will stop flashing.
BUGANI M172BC Bluetooth 5.3 Connection

Image: Diagram illustrating the Bluetooth 5.3 connection process between the speaker and a device.

4. True Wireless Stereo (TWS) Pairing

For an enhanced stereo experience, you can pair two BUGANI M172BC speakers together.

  1. Ensure both speakers are powered on and not connected to any other Bluetooth device.
  2. On one speaker, press the TWS button (refer to speaker controls for exact button). The speaker will enter TWS pairing mode.
  3. The two speakers will automatically connect to each other. An audible prompt will confirm successful TWS pairing.
  4. Once TWS paired, connect your device to one of the speakers via Bluetooth as described in step 3. Both speakers will then play audio in stereo.
BUGANI M172BC True Wireless Stereo Pairing

Image: Two BUGANI M172BC speakers wirelessly connected for True Wireless Stereo (TWS) playback, enhancing the audio experience.

Operating Instructions

1. Basic Controls

The speaker features intuitive controls for audio playback:

  • Power Button: Press and hold to power on/off.
  • Play/Pause Button: Press once to play or pause audio.
  • Volume Up (+): Press to increase volume. Press and hold for continuous volume increase.
  • Volume Down (-): Press to decrease volume. Press and hold for continuous volume decrease.
  • Next Track: Press and hold the Volume Up (+) button.
  • Previous Track: Press and hold the Volume Down (-) button.
  • Light Mode Button: Press to cycle through LED light modes.

2. LED Light Modes

The speaker features six full-panel lighting effects that can be synchronized with your music. Press the Light Mode button to cycle through the available lighting patterns and colors.

BUGANI M172BC LED Party Lights

Image: Visual representation of the six different LED light modes available on the BUGANI M172BC speaker.

3. Connectivity Options

In addition to Bluetooth, the speaker supports multiple audio input methods:

  • AUX Input: Connect an external audio device using a 3.5mm audio cable (not included) to the AUX port. The speaker will automatically switch to AUX mode.
  • Micro SD Card: Insert a Micro SD card (not included) with audio files into the designated slot. The speaker will automatically play music from the card.
  • USB Playback: Insert a USB flash drive (not included) with audio files into the USB port. The speaker will automatically play music from the drive.

4. Battery Life

The speaker provides up to 15 hours of continuous playtime at 50% volume with lights off, or 6 hours of continuous playtime at 80% volume with lights on. Actual battery life may vary based on volume level, audio content, and usage of LED lights.

BUGANI M172BC 24 Hours Playtime

Image: The BUGANI M172BC speaker shown in an outdoor setting, illustrating its extended playtime capabilities.

Maintenance

1. Cleaning

Wipe the speaker's exterior with a soft, damp cloth. Do not use abrasive cleaners, alcohol, or solvents, as these may damage the surface. Ensure all ports are dry before charging or connecting other devices.

2. Storage

Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50% every three months to preserve battery health.

3. Water Resistance

The speaker is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. It is resistant to splashes and light rain but should not be submerged in water.

BUGANI M172BC IPX5 Waterproof Rating

Image: The BUGANI M172BC speaker near a pool, demonstrating its IPX5 water resistance against splashes.

Troubleshooting

ProblemPossible CauseSolution
Speaker does not power on.Low battery.Charge the speaker fully.
No sound.Volume too low; incorrect input source; device not connected.Increase volume on both speaker and connected device. Ensure correct input mode (Bluetooth, AUX, SD, USB). Re-pair Bluetooth device.
Bluetooth pairing fails.Speaker not in pairing mode; device too far; interference.Ensure speaker is in pairing mode. Move device closer to speaker (within 10 meters). Turn off other Bluetooth devices.
Sound distortion or crackling.Volume too high; low battery; poor Bluetooth connection.Reduce volume. Charge the speaker. Move device closer to speaker.
TWS pairing fails.Speakers already connected to other devices; incorrect pairing procedure.Ensure both speakers are disconnected from other devices. Follow TWS pairing instructions carefully.

Specifications

FeatureDetail
Model NumberM172BC
BrandBUGANI
Speaker Maximum Output Power120 watts
Connectivity TechnologyBluetooth
Audio Output ModeStereo
Mounting TypeTabletop Mount
Speaker TypeSubwoofer
Woofer Diameter5.25 inches
Bluetooth Range10 meters
Item Dimensions (D x W x H)9"D x 8"W x 14.5"H
Audio Driver TypeDynamic Driver
Waterproof RatingIPX5
Connectivity ProtocolBluetooth; AUX; Micro SD Card; USB

Warranty and Support

Warranty Information

This product comes with a warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions. For any warranty claims or service requests, retain your proof of purchase.

Customer Support

For further assistance, technical support, or inquiries, please visit the official BUGANI store or contact their customer service. You can find more information and contact details by visiting the BUGANI Store on Amazon.

© 2026 BUGANI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.