Introduction
The Bimar INB-VR508 is an evaporative air cooler with an integrated heat function, designed to provide year-round comfort. This versatile appliance features a 7-liter water tank, touch display controls, a remote control, and a programmable timer (1-12 hours). It operates on a natural evaporation principle for cooling and offers adjustable heating from 15°C to 35°C. Key features include 3 speed levels, 3 ventilation modes, 140° oscillation, a negative ion generator, and a removable dust filter. Its portable design with 4 wheels and a recessed handle allows for easy movement between rooms. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
Safety Instructions
- Read all instructions carefully before using the appliance.
- Ensure the power supply voltage matches the rating label on the appliance.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Always unplug the appliance before cleaning, refilling the water tank, or performing any maintenance.
- Keep the appliance away from children and pets.
- Do not block the air inlet or outlet.
- Place the appliance on a stable, level surface to prevent tipping.
- Do not use the appliance near flammable materials or in wet environments.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Only use the appliance for its intended household purpose as described in this manual.
Product Overview
Key Components
- Control Panel with Touch Display
- Air Outlet Louvers
- Water Tank (7 Liters, removable)
- Dust Filter (removable and washable)
- Wheels with Brakes
- Recessed Handle
- Remote Control
- Ice Packs (2 included)
Control Panel Functions
The touch display allows easy access to all functions. Refer to the diagram below for button identification.
Image: Overview of the Bimar INB-VR508's features, including the control panel, remote, 7-liter tank, heat function, 3 speeds/modes, 1-12h timer, touch display, negative ions, removable dust filter, 2 ice packs, no exhaust tube, no installation, and 140° oscillation.
Setup
- Unpacking: Carefully remove the appliance from its packaging. Retain packaging for future storage or transport.
- Positioning: Place the air cooler on a firm, level surface. Ensure there is adequate space around the unit for proper airflow (at least 20 cm from walls or furniture). The unit is equipped with 4 wheels for easy movement; lock the brakes once positioned.
- Filling the Water Tank:
- Pull out the water tank from the rear of the unit.
- Fill the tank with clean tap water. Do not exceed the 'MAX' fill line.
- For enhanced cooling, place the included ice packs (after freezing them) into the water tank.
- Slide the water tank back into the unit until it clicks into place.
- Power Connection: Plug the power cord into a suitable electrical outlet (220-240V, 50-60Hz).
Image: The Bimar INB-VR508 evaporative air cooler positioned in a bedroom, demonstrating its compact and portable design suitable for various living spaces.
Operating Instructions
The appliance can be operated using the touch control panel on the top of the unit or the provided remote control.
Power On/Off
- Press the POWER button to turn the unit on or off.
Mode Selection
Press the MODE button to cycle through the available operating modes:
- Cooling (Evaporative): Uses water evaporation to cool the air. Ensure the water tank is filled.
- Heating: Activates the heating element. The temperature can be adjusted from 15°C to 35°C.
- Fan: Operates as a fan without cooling or heating.
Speed Adjustment
- Press the SPEED button to select between 3 fan speeds: Low, Medium, and High.
Timer Function
- Press the TIMER button to set the operating time from 1 to 12 hours. The unit will automatically turn off after the set time.
Oscillation
- Press the SWING button to activate or deactivate the 140° oscillation function, distributing air more widely.
Ionizer
- Press the ION button to activate the negative ion generator, which helps to purify the air.
Remote Control
The remote control duplicates all functions available on the main control panel for convenient operation from a distance. Ensure the remote has working batteries and is pointed towards the unit's receiver.
Maintenance
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your appliance.
- Always unplug the unit before cleaning or maintenance.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Tank Cleaning:
- Remove the water tank from the unit.
- Empty any remaining water.
- Clean the tank with mild detergent and rinse thoroughly with clean water.
- Allow the tank to air dry completely before reinserting. Clean the tank regularly, especially if using the cooling function frequently.
- Dust Filter Cleaning:
- Locate and remove the dust filter from the back of the unit.
- Rinse the filter under running water to remove accumulated dust.
- Allow the filter to dry completely before reattaching it to the unit. Clean the filter every 2-4 weeks, depending on usage and air quality.
- Storage: If storing the unit for an extended period, ensure the water tank is empty and clean, and the dust filter is clean and dry. Store the unit in a cool, dry place, preferably in its original packaging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Power cord not properly plugged in; Power outlet faulty. | Check power cord connection; Try a different outlet; Check household circuit breaker. |
| No cooling effect (evaporative mode) | Water tank is empty; Water pump is not working; Filter is clogged. | Fill water tank; Check if water pump is operating (listen for sound); Clean the dust filter. |
| Weak airflow | Air inlet/outlet blocked; Dust filter is dirty; Fan speed is too low. | Clear any obstructions; Clean the dust filter; Increase fan speed. |
| Unusual noise | Unit not on a level surface; Foreign object inside; Water pump issue. | Place on a stable, level surface; Unplug and check for obstructions (if safe); Contact customer support if noise persists. |
| Remote control not working | Batteries are dead or incorrectly inserted; Remote not pointed at receiver. | Replace batteries; Ensure correct battery polarity; Point remote directly at the unit. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | Innoliving |
| Model Name | INB-VR508 |
| Mounting Type | Floor Mount |
| Special Features | Digital Display, Removable Washable Filter, Portable, Adjustable Speed, Oscillating Fan, Ionizer, Heat Function |
| Color | White |
| Control Type | Touch |
| Tank Capacity | 7 Liters |
| Item Weight | 9.2 Kilograms |
| Recommended Uses | Commercial, Home Use |
| Form Factor | Tower |
| Electric Power (Cooling) | 80 Watts |
| Electric Power (Heating) | 2000 Watts |
| Noise Level | 40 Decibels |
| Number of Speeds | 3 |
| Amperage | 16 Amperes |
| Voltage | 220 Volts |
| Smart Home Compatibility | Not Smart Home Compatible |
| Operating Mode | Automatic |
| EU Spare Parts Availability | 5 Years |
| Included Components | Air Filter, User Manual, Ice Pack, Water Tank |
| Dimensions (DxWxH) | 27P x 73l x 30.5H cm |
Warranty and Support
This product comes with a 2-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, warranty service, or any questions regarding the operation or maintenance of your Bimar INB-VR508, please contact Innoliving customer support. Refer to the contact information provided in the packaging or on the manufacturer's official website.
