Earbay Wireless Headphones for TV

Introduction

Thank you for choosing the Earbay Wireless Headphones for TV. This manual provides detailed instructions for setting up, operating, and maintaining your headphones and transmitter charging base. These headphones are designed to provide a clear, immersive audio experience for TV watching with ultra-low latency and versatile connectivity options.

What's in the Box

Please check the package contents to ensure all items are present:

• TV Headphones × 1
• Transmitter Charging Base × 1
• Optical cable × 1
• AUX 3.5mm cable × 1
• RCA cable × 1
• USB-A to USB-C charging cable × 1
• DC-5V power adapter × 1

Image: All components included in the Earbay Wireless Headphones package.

Product Overview

Familiarize yourself with the main components and controls of your Earbay Wireless Headphones and Transmitter Charging Base.

Image: Detailed diagram of headphone and charging base controls and ports.

Headphone Controls:

• Volume +: Increase volume.
• Multi-Function Button: Power on/off, play/pause, answer/end calls.
• Volume -: Decrease volume.
• EQ Switch/Mute Button: Short press to cycle through audio modes (Vocal, Cinema, Bass, Balanced). Long press to mute the microphone during calls.
• Charging Port: USB-C port for direct charging.
• 3.5mm Audio Jack: For wired connection.
• Red/White Indicator Light: Status indicator.
• Power Switch: Slide to turn headphones on/off.

Transmitter Charging Base:

• Charging Indicator: Shows charging status.
• Connection Indicator: Shows connection status.
• Multi-Function Button: Pairing button.
• SPDIF-Power/Channel Selection Switch (3-Position): Left: OFF, Middle: AUX, Right: SPDIF (Optical).
• Type-C Power Port: For power input to the base.
• SPDIF Optical Port: For optical audio input.
• 3.5mm AUX Port: For 3.5mm audio input.

Setup and Connection

The Earbay Wireless Headphones offer multiple ways to connect to your TV or other audio sources.

1. Connecting the Transmitter Base to TV (Recommended for Low Latency)

The transmitter base supports Optical, RCA, and 3.5mm AUX connections. Choose the appropriate cable for your TV.

Image: Connection options for the transmitter base to a television.

1. Power the Transmitter Base: Connect the DC-5V power adapter to the Type-C Power Port on the base and plug it into a power outlet.
2. Choose Audio Input: Select the appropriate cable (Optical, AUX 3.5mm, or RCA) and connect it from your TV's audio output port to the corresponding input port on the transmitter base.
3. Set Input Mode: Slide the SPDIF-Power/Channel Selection Switch on the base to the correct position (Middle for AUX, Right for SPDIF/Optical).
4. Power On Headphones: Slide the Power Switch on the headphones to the ON position. The headphones and base will automatically pair. The connection indicator on the base and the red/white indicator light on the headphones will confirm a successful connection.
5. TV Audio Settings: For Optical connection, you may need to adjust your TV's audio output settings. Navigate to your TV's sound settings and set the "Digital Output Audio Format" to "PCM" (Pulse Code Modulation).

Image: Example of TV audio settings for PCM output.

2. Bluetooth Pairing (Direct to TV or Other Devices)

If your TV has Bluetooth or you wish to connect to a smartphone, laptop, or other Bluetooth-enabled device, follow these steps:

Image: Bluetooth pairing process for direct connection to a TV.

1. Ensure Transmitter is OFF: If using the transmitter base, ensure its SPDIF-Power/Channel Selection Switch is in the OFF (Left) position.
2. Power On Headphones: Slide the Power Switch on the headphones to the ON position. The headphone's indicator light will flash alternately red and white, indicating pairing mode.
3. Enable Bluetooth on Device: On your TV, smartphone, or laptop, go to the Bluetooth settings.
4. Search for Devices: Select "Search for devices" or "Add new device."
5. Select Headphones: From the list of available devices, select "TV-96."
6. Confirm Connection: A flash white LED on the headphones indicates a successful connection.

Operating Instructions

Power On/Off

• To power on, slide the Power Switch on the headphones to the ON position.
• To power off, slide the Power Switch on the headphones to the OFF position.

Charging the Headphones

The headphones can be charged by placing them on the transmitter charging base or directly via a USB-C cable.

Image: Headphones charging on the transmitter base.

• Using the Charging Base: After use, simply place the headphones onto the charging base. Ensure the contact pins align for a secure connection. The charging indicator on the base will illuminate to confirm charging.
• Direct USB-C Charging: Connect the USB-A to USB-C charging cable to the headphone's charging port and a power source.
• A full charge takes approximately 2 hours and provides up to 40 hours of playback time.

Audio Modes (EQ Switch)

Short press the EQ Switch/Mute Button on the headphones to cycle through the following audio modes:

• Vocal Mode: Enhances clarity for dialogue.
• Cinema Mode: Provides an immersive, cinematic sound experience.
Bass Mode: Boosts low frequencies for richer bass.
• Balanced Mode: Offers a neutral, balanced sound profile.

Volume Control

Use the Volume + and Volume - buttons on the headphones to adjust the listening volume.

Mute Function

During a phone call, long-press the EQ Switch/Mute Button to mute the microphone.

Comfort and Fit

The Earbay Wireless Headphones are designed for extended comfort.

Image: Headphone comfort features.

• Adjustable Headband: The stainless steel headband can be adjusted to fit various head sizes.
• Rotatable Ear Cushions: The adaptive foam ear cushions can rotate 180 degrees for a personalized fit and easy storage.
• Soft Earpads: Premium protein leather ear cushions with high-density memory foam provide a breathable, pressure-free fit.

Specifications

Troubleshooting

If you encounter issues with your Earbay Wireless Headphones, please refer to the following common solutions:

• No Sound:
  • Ensure the headphones are powered on and fully charged.
  • Verify the transmitter base is powered on and correctly connected to the TV's audio output.
  • Check the SPDIF-Power/Channel Selection Switch on the base is set to the correct input (AUX or SPDIF).
  • If using Optical connection, confirm your TV's audio output is set to "PCM."
  • Increase the volume on both the headphones and your TV/connected device.
  • If connected via Bluetooth, ensure the headphones are paired and selected as the audio output on your device.
• Audio Lag/Lip-Sync Issues:
  • Ensure you are using the transmitter base for TV connection, as it provides ultra-low latency. Direct Bluetooth connections to some TVs may have higher latency.
  • Check for interference from other wireless devices.
• Headphones Not Pairing:
  • Ensure both the headphones and transmitter base (if used) are powered on.
  • If pairing directly via Bluetooth, ensure the transmitter base is OFF and the headphones are in pairing mode (flashing red/white light).
  • Try restarting both the headphones and the audio source device.
• Short Battery Life:
  • Ensure the headphones are properly seated on the charging base or the USB-C cable is securely connected.
  • Verify the charging indicator light is active during charging.

Warranty and Support

The Earbay Wireless Headphones (Model JLS-TV966H2-BY-NEW) come with a 1-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or further assistance, please contact Earbay customer service through the retailer where you purchased the product or visit the official Earbay website.

Please retain your proof of purchase for warranty purposes.