Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your RORRY AuraDock 4-in-1 Wireless Charging Station. This versatile device offers a comprehensive charging solution for your compatible Apple devices and other accessories, featuring a detachable 5000mAh mobile battery, 15W magnetic wireless charging, and the capability to charge up to four devices simultaneously.

Product Overview
Package Contents
- 1 x RORRY AuraDock 4-in-1 Wireless Charging Station
- 1 x USB-C to Type-C Cable
- 1 x Magnetic Enhancement Ring
- 1 x User Manual

Key Features
- Detachable 5000mAh Magnetic Mobile Battery: Functions as a standalone power bank with MagSafe and USB-C charging. Compact and lightweight (138g) for easy portability.
- 4-in-1 Simultaneous Fast Charging: Charges smartphone, Apple Watch, AirPods, and the mobile battery concurrently. Features 1:1 automatic positioning for efficient charging.
- High-Speed Charging: Up to 15W magnetic wireless charging for smartphones (e.g., iPhone 17 Pro to 25% in 30 minutes). Up to 15W/5W for AirPods. Up to 5W for Apple Watch (e.g., iWatch Series 10 fully charged in approximately 1 hour 20 minutes). Up to 20W wired fast charging via Type-C port.
- Adjustable Angle & Portability: Foldable design for easy transport. Charging stand offers approximately 0-70° angle adjustment and 360° rotation for vertical or horizontal viewing.
- LED Battery Indicator & Multi-Protection: LED display shows battery level. Features over-heat protection, FOD foreign object detection, over-current/over-voltage/over-charge prevention, and constant temperature management. PSE certified for safety.



Setup
Connecting to Power
- Connect the provided USB-C to Type-C cable to the charging station's Type-C input port.
- Connect the other end of the cable to a compatible power adapter (30W or higher recommended, not included).
- Plug the power adapter into a wall outlet.
Initial Charging
Upon first use, ensure the charging station and detachable mobile battery are fully charged. The LED display on the mobile battery will show its charge level.

Operating Instructions
Charging Your Devices

Charging iPhone (MagSafe Compatible)
- Place your MagSafe-compatible iPhone (iPhone 12 series or later) onto the magnetic charging pad of the station.
- The iPhone will automatically align and begin charging at up to 15W.
- For non-MagSafe iPhones, use the included magnetic enhancement ring on your phone case for magnetic attachment, or use the Type-C port for wired charging.

Charging Apple Watch
- Place your Apple Watch (all series supported) onto the dedicated Apple Watch charging module.
- Ensure the watch is properly seated for charging to begin at up to 5W.
Charging AirPods
- Place your wireless charging-compatible AirPods case onto the designated AirPods charging area.
- Charging will commence at up to 15W/5W depending on the AirPods model. (Note: AirPods cases not compatible with wireless charging are not supported.)
Using the Detachable Mobile Battery
- To use the mobile battery independently, detach it from the charging station.
- Attach it magnetically to your MagSafe-compatible iPhone for wireless charging.
- Alternatively, use a USB-C cable to connect the mobile battery to any compatible device for up to 20W wired charging.

Pass-Through Charging
The AuraDock supports pass-through charging. When the station is connected to power, it will prioritize charging your connected devices (iPhone, Apple Watch, AirPods). Once these devices are fully charged, the station will automatically switch to charging the detachable mobile battery. This ensures all your devices are 100% charged by morning.

Adjusting Viewing Angle
The charging stand features a foldable design with an adjustable angle from approximately 0° to 70° and 360° rotation. This allows for both vertical and horizontal viewing, adapting to various usage scenarios.

Maintenance
- Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- General Care: Avoid dropping the device or exposing it to water. Do not attempt to disassemble or repair the unit yourself.
Troubleshooting
Device Not Charging
- Ensure the charging station is properly connected to a power adapter (30W or higher recommended).
- Verify that your device is correctly placed on the charging area and aligned with the magnetic coil (for MagSafe).
- Check if your device or AirPods case supports wireless charging.
- Remove any foreign objects between the charger and your device.
- If using a phone case, ensure it is MagSafe compatible or use the provided magnetic enhancement ring.
Slow Charging
- Ensure you are using a power adapter of 30W or higher output. Lower wattage adapters may result in slower charging.
- Check for proper alignment of your device on the charging pad.
- Avoid charging in excessively hot environments, as this can trigger temperature protection and slow down charging.
LED Indicator Behavior
- When the charging station is connected to AC power and no other devices are attached, if the mobile battery indicator blinks one bar, it indicates the mobile battery is charging.
- When charging a smartphone, the mobile battery's remaining charge display will not be shown.
- In charging station mode, the Type-C port on the mobile battery is for input only; its output function is disabled.
Specifications
| Feature | Detail |
|---|---|
| Brand | RORRY |
| Model Number | M1-5000 |
| Compatible Devices | iPhone 12/13/14/15/16/17 Series, AirPods Pro/4/3/2 (wireless charging compatible cases only), Apple Watch Ultra/Ultra 2/Ultra 3/11/10/9/8/7/6/SE/SE2/SE3/5/4/3/2/1 All Series, Other wireless charging compatible devices, MagSafe compatible cases |
| Included Components | 4-in-1 Wireless Charger Main Unit, USB-C to Type-C Cable, User Manual, Magnetic Enhancement Ring |
| Features | MagSafe compatible, Magnetic attachment, Wireless charging, Lightweight design, Fast charging |
| Color | Black |
| Watt-hours | 18.5 Watt-hours |
| Number of Items | 1 |
| Output Current | 3 Amps |
| Material | ABS |
| Power Source | Battery Powered |
| Main Power Plug Type | Type C |
| Product Weight | 367 grams |
| UPC | 654403301181 |
Warranty Information
The RORRY AuraDock 4-in-1 Wireless Charging Station comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Support
If you encounter any issues or have questions regarding your RORRY AuraDock 4-in-1 Wireless Charging Station that are not addressed in this manual, please contact RORRY customer support. Refer to the product packaging or the official RORRY website for contact details.