Introduction
This manual provides detailed instructions for the safe and effective use, maintenance, and care of your Generic Automatic Hands-Free Male Stimulator. Please read this manual thoroughly before first use and retain it for future reference.
Safety Information
- Do not immerse the main unit in water. Only the removable sleeve is designed for washing.
- Keep out of reach of children.
- Discontinue use immediately if you experience any discomfort or pain.
- Consult a healthcare professional if you have any pre-existing medical conditions or concerns.
- Use only the provided charging cable.
- Store in a cool, dry place away from direct sunlight.
Product Overview
The Generic Automatic Hands-Free Male Stimulator is designed to provide a multi-sensory experience with various stimulation modes, including extension, rotation, and vibration, along with cooling and heating functions. It features a modular design for easy cleaning and a visualization window to observe internal mechanisms.
Image: The device offers three primary stimulation modes: extendable motion, powerful rotation, and 7 distinct vibration patterns for a comprehensive experience.
Image: Detailed view of the device emphasizing its 7 vibration modes, strong motor, and elastic material for enhanced performance.
Image: Close-up showing the soft, smooth, and supple silicone material of the sleeve, designed for a realistic tactile experience, including delicate passages and springy textures.
Image: The device features a fully automatic smart design with a visualization window and a modular structure for easy assembly and disassembly.
Setup
- Unpacking: Carefully remove all components from the packaging.
- Initial Charge: Before first use, fully charge the device using the provided USB cable. Refer to the 'Charging' section under Maintenance for details.
- Initial Cleaning: Disassemble the removable silicone sleeve and wash it thoroughly with mild soap and warm water. Allow it to air dry completely before reassembly.
- Lubrication: Apply a water-based lubricant to the entrance of the sleeve for optimal comfort and experience.
Operating Instructions
The device features an intuitive control panel. Familiarize yourself with the buttons before use.
- Power On/Off: Press and hold the power button (usually indicated by a circle with a vertical line) for 2-3 seconds to turn the device on or off.
- Mode Selection: Short press the mode button (often indicated by a waveform or arrow icon) to cycle through different stimulation patterns (e.g., extend, rotate, vibrate).
- Intensity Adjustment: Use the '+' and '-' buttons (if available) to increase or decrease the intensity of the selected mode.
- Cooling/Heating: Press the temperature control button (often indicated by a snowflake or sun icon) to activate cooling or heating functions. Cycle through options as desired.
- Hands-Free Use: Position the device securely for hands-free operation.
Maintenance
Daily Cleaning
Proper cleaning is essential for hygiene and longevity of your device.
- Disassembly: Carefully remove the silicone sleeve from the main unit.
- Washing: Wash the silicone sleeve thoroughly with mild, antibacterial soap and warm water. Ensure all lubricant residue is removed.
- Rinsing: Rinse the sleeve under running water until all soap is gone.
- Drying: Allow the sleeve to air dry completely before reassembling it with the main unit. Avoid using harsh chemicals or abrasive cleaners.
Image: The device's removable sleeve is shown being rinsed under water, illustrating the ease of daily cleaning.
Charging
To ensure optimal performance, charge your device regularly.
- Connect: Plug the provided USB charging cable into the charging port on the device.
- Power Source: Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
- Indicator: The charging indicator light on the device will illuminate or change color to show that it is charging. It will typically turn solid or off when fully charged.
- Charging Time: A full charge typically takes 2-3 hours. Do not overcharge.
Image: The device is shown connected to a USB cable, illustrating the fast and convenient charging process.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. If the issue persists, try a different charging cable or power source.
- Weak or no vibration/rotation: Check if the device is fully charged. Ensure the sleeve is correctly assembled and not obstructing internal mechanisms.
- Temperature functions not working: Verify the device is powered on and fully charged. Ensure the temperature setting is correctly selected.
- Difficulty cleaning: Ensure the silicone sleeve is fully detached from the main unit before washing. Use warm water and mild soap.
Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model Name | male masterburbatar machine |
| Material | Silicone |
| Color | Black |
| Style | Hands Free, Cooling Heating, 7 Sucking Rotating Licking |
| Power Source | USB Charging |
Image: Diagram illustrating the product dimensions: 10.9 inches in height, 3.34 inches in width, with the removable sleeve measuring 3.93 inches in height and 2.55 inches in width.
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, support, or service inquiries, please refer to the contact information provided with your purchase or visit the manufacturer's official website. Please retain your proof of purchase for warranty claims.