RuiSiSi RS34

Download PDF
Contents

RuiSiSi Queen Size Boucle Bed (Model RS34) Instruction Manual

Your guide to assembly, usage, and care.

1. Introduction

Thank you for choosing the RuiSiSi Queen Size Boucle Bed, Model RS34. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

RuiSiSi Queen Size Boucle Bed in a bedroom setting

Image 1.1: The RuiSiSi Queen Size Boucle Bed, Model RS34, featuring a curved upholstered headboard and a modern design.

2. Safety Information

  • Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
  • Do not exceed the maximum weight capacity of 800 LBS.
  • Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
  • Two people are suggested for assembly to ensure safety and ease of installation.
  • Do not stand or jump on the bed frame.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

The RuiSiSi Queen Size Boucle Bed is shipped in 2 packages. All necessary tools for assembly are included.

Expected Components:

  • Headboard (Curved Upholstered)
  • Side Rails (Upholstered)
  • Footboard (Upholstered)
  • Wood Slats and Support System
  • Rubber Wood Legs
  • Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. Setup and Assembly Instructions

Full assembly is required for this bed frame. Please follow the steps below carefully. It is recommended that two people perform the assembly.

  1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the included parts list to ensure all pieces are present.
  2. Attach Legs to Headboard and Footboard: Secure the rubber wood legs to the designated points on the headboard and footboard using the provided hardware. Ensure they are tightened firmly.
  3. Connect Side Rails: Attach the upholstered side rails to the headboard and footboard. Use the appropriate bolts and an Allen wrench to secure these connections. Do not fully tighten all bolts until the frame is completely assembled.
  4. Install Center Support: If your model includes a center support beam, install it now, connecting it between the headboard and footboard.
  5. Place Wood Slats: Position the integrated wood slats across the bed frame. Ensure they are evenly spaced and secured according to the instructions. The slat support system is designed to provide strong mattress support without a box spring.
  6. Final Tightening: Once all components are in place and aligned, go back and securely tighten all bolts and screws. Do not overtighten.
View of the bed frame with wood slats installed

Image 4.1: The bed frame with its integrated wood slat support system, ready for a mattress.

5. Operating Instructions (Usage)

Your RuiSiSi Queen Size Boucle Bed is designed for comfort and durability.

  • Mattress Placement: This platform bed does not require a box spring. Place your mattress directly onto the wood slat support system.
  • Recommended Mattress Thickness: For optimal comfort and aesthetic, a mattress thickness of 8-10 inches is recommended.
  • Weight Capacity: The bed frame is designed to support a maximum weight of 800 LBS, including the mattress and occupants.
  • Headboard Use: The curved padded headboard provides comfortable support for reading, lounging, or relaxing in bed.

6. Maintenance

Proper care will extend the life and appearance of your bed frame.

  • Cleaning Boucle Fabric: For general cleaning, gently vacuum the boucle upholstery with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For tougher stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first. Avoid harsh chemicals.
  • Cleaning Wood Legs: Wipe the rubber wood legs with a soft, damp cloth. Avoid abrasive cleaners.
  • Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading.
Close-up view of the boucle upholstered headboard

Image 6.1: Detail of the soft-touch boucle upholstered headboard.

7. Troubleshooting

If you encounter any issues with your bed frame, refer to the following common solutions:

  • Squeaking Noises: Squeaking often indicates loose hardware. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard and footboard, and where the slats are secured. Ensure the center support legs are firmly on the floor.
  • Bed Feels Unstable: Check that all connections are fully tightened. Ensure the bed is on a level surface. If the floor is uneven, consider using furniture pads under the legs to stabilize.
  • Slats Shifting: Ensure the slats are correctly positioned and secured according to the assembly instructions. If they are designed to be fixed, verify all fasteners are in place.
  • Damaged Parts: If any part is damaged during assembly or use, cease using the bed immediately and contact customer support for replacement parts.

8. Specifications

FeatureDetail
Model NumberRS34
SizeQueen
ColorWhite
Overall Dimensions (L x W x H)90" x 68.3" x 38.5"
Inner Bed DimensionsQueen
Recommended Mattress Thickness8-10 inches
Weight Capacity800 LBS
Overall Product Weight115.1 LBS
Frame MaterialSolid Wood + MDF
Upholstery MaterialBoucle Fabric
Leg MaterialRubber Wood
Assembly RequiredFull Assembly Needed
Number of Packages2
Country of OriginVietnam
Detailed dimensions diagram for the Queen Size Boucle Bed

Image 8.1: Dimensional drawing of the RuiSiSi Queen Size Boucle Bed, showing key measurements in inches.

9. Warranty and Support

For warranty information or customer support regarding your RuiSiSi Queen Size Boucle Bed (Model RS34), please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

© 2023 RuiSiSi. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.