Introduction
Thank you for purchasing the kensen 7D Floating Head Shaver. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and keep it for future reference.
Safety Precautions
- Do not immerse the shaver in water or other liquids, despite its IPX6 waterproof rating.
- After using alkaline products such as soap water, shaving foam, or shampoo, immediately disassemble the shaver head and rinse it thoroughly with water. Alkaline substances can corrode and peel off the shaver's plating.
- Keep the device out of reach of children.
- Do not attempt to repair or modify the shaver yourself. Contact customer support for assistance.
- Ensure the charging cable is not damaged before connecting it to the shaver.
Package Contents
Verify that all items are present in the package:
- kensen 7D Floating Head Shaver
- Cleaning Brush
- USB-C Charging Cable
- Instruction Manual
Product Features
- 7D Floating Head System: Equipped with 7 independent floating heads that naturally adapt to the contours of your head and face for a close and uniform shave.
- Magnetic Detachable Head: The shaver head is magnetically attached for quick removal and easy cleaning.
- Two-Speed Settings: Choose between 6600 RPM for sensitive skin or reduced irritation, and 7000 RPM for a quick and thorough shave on thicker hair.
- IPX6 Waterproof: Designed for wet and dry use, allowing for convenient shaving in the shower or washroom. Easy to rinse clean under running water.
- LED Display: Clearly shows the remaining battery percentage, ensuring you are aware of the power status.
- Type-C Fast Charging: Convenient and modern Type-C charging for quick power replenishment.
- Travel Lock Function: Prevents accidental activation during transport.
Setup
- Initial Charge: Before first use, fully charge the shaver. Connect the provided USB-C charging cable to the shaver's Type-C port and a suitable USB power adapter (not included) or computer USB port. The LED display will show charging progress. A full charge takes approximately 2 hours.
- Attaching the Head: Ensure the 7D floating head is securely attached to the shaver body via its magnetic connection.
Figure 1: Shaver connected to a Type-C charging cable.
Operating Instructions
- Power On/Off: Press the power button to turn the shaver on or off.
- Speed Adjustment: While the shaver is on, press the power button again to switch between the two speed settings (6600 RPM and 7000 RPM).
- Shaving: Gently press the shaver against your skin and move it in circular motions. The 7D floating heads will adapt to your contours. The shaver can be used for bald head shaving or beard shaving.
- Wet Shaving: For a wet shave, apply shaving foam or gel to your skin before use.
- Travel Lock: To activate the travel lock, press and hold the power button for 3 seconds until the lock icon appears on the LED display. To unlock, press and hold the power button for 3 seconds again.
Figure 2: Using the kensen 7D Floating Head Shaver for head shaving.
Figure 3: The shaver can be used for both head and beard shaving.
Maintenance
- Cleaning the Shaver Head: After each use, especially after wet shaving or using alkaline products, detach the shaver head by gently pulling it off the magnetic connection. Rinse the head thoroughly under running water to remove hair clippings and residue.
- Cleaning the Blades: Use the provided cleaning brush to remove any stubborn hair clippings from the blades and inside the shaver head.
- Drying: Shake off excess water and allow the shaver head and body to air dry completely before reattaching the head or storing the device.
- Storage: Store the shaver in a cool, dry place away from direct sunlight.
Figure 4: Detaching the magnetic head for cleaning.
Figure 5: Rinsing the shaver after use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. Travel lock is activated. | Charge the shaver. Deactivate travel lock by pressing and holding the power button for 3 seconds. |
| Shaver does not charge. | Charging cable is faulty or not properly connected. | Ensure the USB-C cable is securely connected to both the shaver and the power source. If the issue persists with the included cable and a working USB port, the product may be defective. Contact customer support. |
| Poor shaving performance. | Blades are dull or clogged with hair. | Clean the shaver head and blades thoroughly. Consider replacing the shaver head if performance does not improve. |
| Skin irritation. | Using high speed on sensitive skin. Applying too much pressure. | Use the lower speed setting. Apply gentle pressure. Ensure skin is clean and moisturized. |
Specifications
- Model: GJG-1699
- Brand: kensen
- Head Type: 7D Rotary Floating Head
- Blade Material: Stainless Steel
- Speed Settings: 6600 RPM, 7000 RPM
- Waterproof Rating: IPX6
- Power Source: Built-in Lithium-ion Rechargeable Battery
- Charging Type: USB Type-C
- Full Charge Time: Approximately 2 hours
- Continuous Use Time: Approximately 90 minutes
- Dimensions: 14.6 x 12.2 x 8.6 cm
- Weight: 460 g
- Country of Origin: China
- UPC: 762110720369
Warranty and Support
This product is designed for reliable performance. In case of any issues or questions regarding your kensen 7D Floating Head Shaver, please contact the seller or kensen official customer support for assistance. Please retain your proof of purchase for warranty claims.
