DREO RO Water Filter 112 Countertop System User Manual

Introduction

Thank you for choosing the DREO RO Water Filter 112 Countertop System. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new water purification system. Please read it thoroughly before use and retain it for future reference.

The DREO RO Water Filter 112 is designed to provide clean, healthy drinking water through a multi-stage reverse osmosis filtration process. It features a compact, installation-free design, real-time water quality monitoring, and an automatic refilling pitcher for convenience.

Image: The DREO RO Water Filter 112 countertop system in a kitchen setting, with a person enjoying a glass of purified water.

Key Features

• 7-in-1 RO Filtration System: Tested by SGS, meeting NSF/ANSI 58 Standards, the DREO 7-in-1 RO filter removes over 1000 impurities (up to 99.99%) in water including PFOA, PFOS, chlorine, fluoride, and more, providing clean, healthy water.
• Real-Time TDS & Filter Life Monitoring: Check raw water and pure water TDS in real time and receive timely filter change reminders for simple maintenance.
• Auto-Fill & Self-Cleaning: The DREO water pitcher features an auto-fill sensor for hands-free refills, while the self-cleaning system automatically flushes internal tubes for consistently pure water.
• Eco-Conscious & Cost-Saving: Advanced RO filtration delivers a 3:1 pure-to-drain ratio, reducing water waste. The filter lasts 6 to 12 months and replaces easily with a twist-to-install design.
• Compact, Space-Saving Design: With a slim 14.51" L × 6.73" W × 13.35" H footprint, the DREO countertop reverse osmosis system fits easily in various spaces without plumbing or installation. The 3L tank plus 1.1L pitcher is ideal for daily use.

Package Contents

• 1 × DREO RO Water Filter 112 Body
• 1 × RO Filter
• 1 × Autofill Water Pitcher

Setup

Follow these steps to set up your DREO RO Water Filter 112 system:

1. Unpack the System: Carefully remove all components from the packaging. Ensure all items listed in the "Package Contents" section are present.
2. Place the Unit: Position the main unit on a flat, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and easy access to the water tank.
3. Install the RO Filter:
   • Open the filter compartment cover.
   • Insert the RO filter into its designated slot. Rotate it clockwise until it locks into place.
   • Close the filter compartment cover.
   

   Image: Illustration showing how to insert and twist the RO filter into the unit.

4. Fill the Water Tank: Remove the raw water tank from the back of the unit. Fill it with tap water up to the MAX line. Reinsert the tank securely into the unit.

   Image: A person filling the removable raw water tank with tap water.
5. Connect Power: Plug the power adapter into the unit and then into a wall outlet. The display will light up.
6. Initial Flush (Before First Use): Before drinking, perform an initial flush to prepare the system.
   • Place the empty autofill pitcher under the dispenser.
   • Press the dispense button to fill the pitcher. Discard this first pitcher of water.
   • Repeat this process 2-3 times to ensure the system is thoroughly flushed and the filter is primed.

   Video: This video demonstrates the initial setup and flushing process for the DREO RO Water Filter 112, showing how to prepare the system for first use.

Operating Instructions

Dispensing Water

1. Ensure the raw water tank is filled.
2. Place the autofill pitcher or a glass under the dispenser.
3. Press the dispense button on the control panel. The system will automatically fill the pitcher to the appropriate level or dispense water into a glass until the button is released.
4. The autofill pitcher features a sensor that detects when it is placed back into the unit, triggering an automatic refill if needed.

   Image: A person placing the autofill pitcher into the DREO RO Water Filter 112 unit, demonstrating the automatic refill feature.

Understanding the Display and Controls

The control panel provides real-time information and allows for easy operation:

• Pure Water TDS: Displays the Total Dissolved Solids (TDS) level of the filtered water.
• Raw Water TDS: Displays the TDS level of the unfiltered tap water.
• Filter Life Indicator: Shows the remaining lifespan of the RO filter. A reminder will appear when it's time for replacement.
• Info Button: Press this button to toggle between displaying pure water TDS, raw water TDS, and filter life.

  Image: Close-up of the DREO RO Water Filter 112's display, showing the pure water TDS, raw water TDS, and the 'Info' button for checking filter status.

Maintenance

Filter Replacement

The RO filter typically lasts 6 to 12 months, depending on water quality and usage. The system will provide a reminder when replacement is needed.

1. Power Off: Unplug the appliance from the power outlet.
2. Remove Old Filter: Open the filter compartment cover. Rotate the old filter counter-clockwise until it stops, then pull it out.
3. Install New Filter: Insert a new RO filter into the slot. Rotate it clockwise until it locks into place. Close the cover.
4. Reset Filter Life: Plug the unit back in. Press and hold the "Info" button for 5 seconds to reset the filter life indicator. Ensure the pitcher has been removed before resetting.
5. Flush New Filter: Perform an initial flush (as described in the Setup section) with the new filter to ensure optimal performance.

Video: This video demonstrates the process of replacing the water filter in the DREO RO Water Filter 112 system.

Self-Cleaning Function

The DREO RO Water Filter 112 features an automatic self-cleaning system that flushes internal tubes to maintain water purity and prolong filter lifespan. This process occurs periodically and does not require user intervention.

Image: An internal diagram of the DREO RO Water Filter 112, highlighting the self-cleaning mechanism that flushes internal tubes.

Cleaning the Water Tanks and Pitcher

• Regularly clean the raw water tank and the autofill pitcher with mild soap and water. Rinse thoroughly.
• Do not use abrasive cleaners or harsh chemicals, as these can damage the materials.
• Ensure all parts are completely dry before reassembling.

Troubleshooting

If you encounter issues not listed here or if the problem persists, please contact DREO customer support.

Specifications

Warranty and Support

DREO products come with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official DREO website.

For technical support, troubleshooting assistance, or to purchase replacement filters, please contact DREO customer service through their official website or the contact information provided in your product packaging.

You can also find additional resources and FAQs on the DREO Store on Amazon.