Important Safety Information
Please read and understand all instructions before beginning assembly and use of this bunk bed. Keep this manual for future reference.
- Maximum Weight Capacity: The top bunk is designed to support a maximum weight of 350 pounds. The bottom bunk also supports a maximum weight of 350 pounds. Do not exceed these limits.
- Top Bunk Age Restriction: The top bunk is not suitable for children under 6 years of age.
- Guardrails: Always use the guardrails on the top bunk. Ensure they are properly installed and secured to prevent falls.
- Mattress Requirements: Use only a Queen size mattress on both the upper and lower bunks. The mattress thickness should not exceed 6 inches for the top bunk to ensure adequate guardrail height.
- No Horseplay: Prohibit horseplay on or under the bed.
- Ladder Safety: Always use the ladder for entering and exiting the top bunk. Do not use substitute ladders.
- Ventilation: Ensure adequate ventilation around the bed.
- Assembly: This product requires assembly by two adults.
Setup and Assembly
This Bellemave Queen Over Queen Metal Bunk Bed is designed for straightforward assembly. It is recommended that two adults perform the assembly. The bed frame will arrive in two separate boxes. Please ensure all parts are present before beginning.
Required Tools (Included)
- Hex Key
- Wrench
Assembly Steps
- Unpack Components: Carefully unpack all components from both boxes. Lay them out on a soft, clean surface to prevent scratches. Verify that all parts listed in the included assembly guide are present.
- Assemble Base Frames: Follow the detailed diagrams in your separate assembly guide to construct the base frames for both the upper and lower bunks. Ensure all bolts are finger-tightened initially.
- Attach Support Slats: Securely attach the metal support slats to both bed frames. Ensure even spacing and firm attachment for mattress support.
- Install Side Structure: Connect the vertical support posts and side rails, including the integrated shelf and pegboard structure. Pay close attention to the orientation of these parts.
- Assemble Drawers: Construct the two storage drawers according to the instructions. Ensure the drawer slides are correctly oriented for smooth operation. If drawers do not fit or operate smoothly, re-check the assembly of the drawer components and the bed frame's side structure.
- Attach Ladder: Securely attach the ladder to the designated side of the bunk bed. Confirm it is stable and can support weight safely.
- Final Tightening: Once all components are assembled, systematically tighten all bolts and fasteners using the provided tools. Do not overtighten.
- Place Mattresses: Position Queen size mattresses on both the upper and lower bunks.
Operating Instructions
This bunk bed is designed for comfortable and functional use, featuring integrated storage and safety elements.
Using the Bunks
- Upper Bunk: Access the upper bunk using the integrated ladder. Ensure the guardrails are always in place.
- Lower Bunk: The lower bunk provides a spacious sleeping area.
Integrated Features
- Headboard Shelf: The upper bunk features a headboard shelf (11.4" deep) for convenient storage of small items like phones, books, or a water bottle.
- Pegboard: The side pegboard allows for customizable organization with hooks (not included) for hanging items.
- Storage Drawers: Two pull-out drawers are located at the base of the side structure, providing additional storage space.
- Clothes Hooks: Integrated hooks are available on the side structure for hanging clothes or accessories.
Maintenance
Regular maintenance will help prolong the life and safety of your Bellemave bunk bed.
- Cleaning: Wipe metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. For wooden drawer fronts and shelves, use a wood-safe cleaner.
- Fastener Check: Periodically (e.g., every 3-6 months) check all bolts and fasteners to ensure they are tight. Retighten if necessary to maintain structural integrity and prevent creaking.
- Inspection: Regularly inspect the bed frame, ladder, guardrails, and slats for any signs of wear, damage, or loose connections. Address any issues promptly.
Troubleshooting
If you encounter issues with your bunk bed, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not fit or operate smoothly. | Incorrect assembly of drawer components or side frame. | Review the assembly instructions for the drawers and the bed's side structure. Ensure all parts are oriented correctly and fully seated. Check that drawer slides are aligned. |
| Bed frame creaks or feels unstable. | Loose fasteners. | Carefully re-tighten all bolts and screws throughout the entire bed frame. Do not overtighten. |
| Missing or damaged parts. | Shipping damage or packaging error. | Contact customer support with your purchase details and a description of the missing/damaged parts. |
Specifications
Detailed specifications for the Bellemave Queen Over Queen Metal Bunk Bed:
- Model Number: FST00231-QA-BB1
- UPC: 800067062436
- Size: Queen over Queen bunk beds
- Material: Metal (Frame), Wood (Drawer fronts, shelves)
- Product Dimensions (L x W x H): 93.7" x 63" x 64.3"
- Item Weight: 84 pounds
- Color: Black Bunk With Drawers
- Style: Modern
- Included Components: Bed frame, Guardrails, Ladder, 2 Storage Drawers, Integrated Shelf, Pegboard, Slats
- Maximum Weight Recommendation: 350 pounds (per bunk)
- Compatible Mattress Size: Queen
- Number of Drawers: 2
- Number of Packs: 2 (ships in two boxes)
Warranty Information
Specific warranty details for the Bellemave Queen Over Queen Metal Bunk Bed are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact the retailer from whom you purchased this product. You may also visit the official Bellemave store on Amazon for additional resources or contact information.
Bellemave Store Link: Visit the Bellemave Store
