Introduction
Thank you for choosing the Heybly HAS002SBK-1 Fish Tank Stand. This stand is designed to provide a stable and functional base for your aquarium, featuring integrated power outlets and convenient storage drawers. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.
Image: The Heybly HAS002SBK-1 Fish Tank Stand, showcasing its two-tier design, integrated power outlet, and storage drawers, supporting two aquariums.
Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Ensure all components are securely fastened before placing any weight on the stand.
- Do not exceed the maximum load capacity of 200 lbs for the top tier and 100 lbs for the bottom tier. Exceeding these limits can cause structural failure.
- Place the stand on a flat, level surface to prevent wobbling and ensure stability. Use the adjustable leveling feet as needed.
- Keep electrical components (power outlet) away from water to prevent electric shock. Always unplug the stand from the power source before performing any maintenance or moving the unit.
- Do not allow children to climb on or play with the stand.
- Regularly inspect the stand for any signs of wear, damage, or loose connections.
Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Metal Frame Components
- Top Shelf Panel
- Middle Shelf Panel
- Bottom Shelf Panel
- Fabric Drawers (1 large, 2 small)
- Integrated Power Outlet with USB Ports and Power Cord
- Adjustable Leveling Feet
- Accessory Hooks
- Assembly Hardware (screws, Allen wrench, etc.)
- Instruction Manual
Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Compare with the package contents list.
- Assemble the Metal Frame: Connect the vertical and horizontal metal frame pieces using the provided screws and Allen wrench. Ensure all connections are tight and secure.
- Install Shelf Panels: Place the top, middle, and bottom shelf panels onto the designated frame sections. Secure them with screws as indicated in the detailed assembly diagram (refer to the included paper manual for specific diagrams).
- Attach Power Outlet: Mount the integrated power outlet unit to the designated slot on the side of the stand. Ensure the power cord is routed safely and not pinched.
- Insert Drawers: Assemble the fabric drawers if necessary and slide them into their respective compartments. The stand includes one large and two small drawers.
- Attach Accessory Hooks: Secure the accessory hooks to the side of the stand for convenient storage of aquarium tools.
- Adjust Leveling Feet: Once the stand is in its desired location, adjust the leveling feet at the bottom to ensure the stand is perfectly stable and level. This is crucial for the safety of your aquarium.
Image: Detailed view of the stand's features, including adjustable leveling feet for stability, the waterproof surface of the shelves, and convenient accessory hooks.
Image: A diagram illustrating the dimensions and recommended aquarium sizes for the top (5-10 gallons) and bottom (5 gallons) tiers of the stand.
Operating Instructions (Power Outlet)
The Heybly HAS002SBK-1 stand includes an integrated power outlet for convenient access to power for your aquarium equipment.
- Power Connection: Plug the stand's main power cord into a grounded wall outlet.
- AC Outlets: The stand features 2 AC outlets (125V/12A) for connecting aquarium lights, heaters, filters, and other accessories.
- USB Ports: Two USB ports (5V/2A) are provided for charging devices or powering USB-compatible aquarium equipment.
- Cable Management: Utilize the integrated cable management features to keep cords tidy and prevent tripping hazards.
Image: A close-up view of the integrated power outlet, highlighting the two AC outlets and two USB ports, along with examples of connected aquarium devices like a light, heater, and air pump.
Maintenance
- Cleaning: Wipe down the stand with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. The panels are waterproof for easy cleaning of spills.
- Drawer Care: The fabric drawers can be spot cleaned with a mild detergent. Ensure they are completely dry before returning them to the stand.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Electrical Safety: Regularly inspect the power cord and outlets for any signs of damage. If damage is found, discontinue use and replace the power unit if possible, or contact customer support.
Image: The Heybly Fish Tank Stand, highlighting its robust construction and ample space for aquariums and accessories.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly. | Uneven floor; loose connections. | Adjust the leveling feet until stable. Check and tighten all assembly screws. |
| Power outlets not working. | Stand not plugged in; circuit breaker tripped; faulty outlet. | Ensure the main power cord is securely plugged into a working wall outlet. Check your home's circuit breaker. If issues persist, contact customer support. |
| Drawers do not slide smoothly. | Improper assembly; obstruction. | Re-check drawer assembly. Ensure nothing is obstructing the drawer's path. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | HAS002SBK-1 |
| Color | Black |
| Material | Metal, Particle Board |
| Overall Dimensions (L x W x H) | 20.5 x 10.2 x 30.9 inches (52 x 26 x 78.5 cm) |
| Item Weight | 10.3 pounds (4.67 kg) |
| Top Tier Load Capacity | Up to 200 lbs (90.7 kg) |
| Bottom Tier Load Capacity | Up to 100 lbs (45.3 kg) |
| Recommended Top Tank Size | 5-10 Gallons |
| Recommended Bottom Tank Size | 5 Gallons |
| AC Outlets | 2 (125V/12A) |
| USB Ports | 2 (5V/2A) |
| Power Cord Length | 4.9 feet (1.5 meters) |
| Special Features | Integrated Power Outlet, Storage Drawers, Adjustable Leveling Feet, Accessory Hooks, Waterproof Panels |
Image: A comprehensive diagram showing the height, width, depth, and internal dimensions of the stand, along with the maximum load capacities for each tier.
Warranty and Support
Heybly products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Heybly website. If you encounter any issues or have questions regarding your Heybly HAS002SBK-1 Fish Tank Stand, please contact our customer support team:
- Customer Service: Refer to the contact information provided in your product packaging or on the Heybly official website.
- Online Resources: Visit Heybly's Amazon Store for additional product information and support.