Jocoevol 51-inch Round Dining Table

Jocoevol 51-inch Round Dining Table User Manual

Model: 51-inch Round Dining Table

Introduction

Thank you for choosing the Jocoevol 51-inch Round Dining Table. This manual provides detailed instructions for assembly, proper usage, maintenance, and troubleshooting to ensure a long and satisfactory experience with your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

  • Always assemble the table on a soft, clean surface to prevent scratches.
  • Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as needed.
  • Do not exceed the maximum weight recommendation of 500 pounds.
  • Keep small parts away from children during assembly.
  • This table is designed for indoor use only.

Package Contents

Before assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Tabletop (1)
  • Legs (4)
  • Cross-shaped base frame (1)
  • Tabletop support brackets (4)
  • Hardware pack (screws, hex bolts, washers)
  • Installation Tool (1)
Diagram showing all parts of the Jocoevol 51-inch Round Dining Table laid out for assembly.

Image: All components of the dining table, including the round tabletop, four legs, cross-shaped base, and hardware.

Setup and Assembly

Assembly is designed to be straightforward with clear instructions and pre-drilled holes. An installation tool is included.

  1. Prepare the Area: Unpack all components and lay them out on a soft, clean surface (e.g., a rug or blanket) to prevent damage during assembly.
  2. Attach Legs to Base: Secure the four legs to the cross-shaped base frame using the provided screws and the installation tool. Ensure they are firmly attached.
  3. Install Tabletop Support Brackets: Insert the tabletop support brackets into the pre-drilled holes on the top of the leg assembly.
  4. Secure Tabletop: Carefully align the tabletop with the leg assembly. Secure the legs to the tabletop support brackets using the included hex bolts. Tighten all screws and bolts securely.
  5. Final Check: Once all connections are secure, carefully flip the table upright. Check for stability and adjust the feet if necessary to ensure the table is level.
Close-up of the table's cross-shaped base and adjustable feet.

Image: Detail of the sturdy cross-shaped base and adjustable leveling feet for stability.

Operating Instructions (Usage)

The Jocoevol 51-inch Round Dining Table is designed for versatile indoor use, providing ample space for dining and gatherings.

  • Seating Capacity: This 51-inch round table comfortably accommodates 6 to 8 people, making it ideal for family meals or social gatherings.
  • Space-Saving Design: The cross-shaped base allows for ample legroom and enables dining chairs or stools to be easily tucked underneath, optimizing space in your kitchen or dining room.
  • Placement: Position the table in your desired indoor location. Ensure it is on a flat, stable surface.
Jocoevol 51-inch Round Dining Table set up with chairs in a dining room setting.

Image: The dining table arranged with chairs, demonstrating its capacity for family use.

Care and Maintenance

Proper care will help maintain the appearance and longevity of your dining table.

  • Cleaning: The thickened MDF tabletop is waterproof, heat-resistant, and scratch-resistant. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
  • Protection: While the tabletop is scratch-resistant, using placemats or coasters is recommended to protect against excessive heat or sharp objects.
  • Stability Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain table stability.
  • Environment: Keep the table away from direct sunlight and extreme temperature changes to prevent material warping or fading.
Close-up view of the reinforced grey tabletop surface.

Image: Detail of the reinforced tabletop, highlighting its durable surface.

Troubleshooting

If you encounter any issues with your dining table, please refer to the following common problems and solutions.

ProblemPossible CauseSolution
Table is wobbly or unstable.Loose screws/bolts; uneven floor; adjustable feet not properly set.Ensure all assembly screws and bolts are tightened. Adjust the leveling feet on the base until the table is stable on an uneven floor.
Missing parts or hardware.Packaging error; parts overlooked during unpacking.Carefully re-check all packaging materials. If parts are still missing, contact Jocoevol customer support immediately for replacements.
Difficulty during assembly (e.g., holes not aligning).Incorrect orientation of parts; manufacturing defect.Double-check the assembly steps and part orientations. Do not force parts. If issues persist, contact customer support.
Surface damage (scratches, dents).Impact during shipping or assembly; improper use.For minor scratches, touch-up pens or furniture markers may be used. For significant damage, contact customer support.

Specifications

FeatureDetail
BrandJocoevol
Model Namekitchen table
Product Dimensions51"D x 51"W x 30"H
Item Weight80 Pounds
Maximum Weight Recommendation500 Pounds
Frame MaterialEngineered Wood
Top Material TypeEngineered Wood
ColorGrey
ShapeRound
Table DesignDining Table
Style NameIndustrial, Farmhouse
Furniture FinishMatte
Seating Capacity8 (Unextended)
Base TypePedestal
Room TypeDining Room, Kitchen
Indoor/Outdoor UsageIndoor
Assembly RequiredYes
Included ComponentsInstallation Tool
Diagram showing the dimensions of the Jocoevol 51-inch Round Dining Table.

Image: Dimensional drawing of the dining table, indicating its 51-inch diameter and 29.9-inch height.

Warranty Information

Jocoevol stands behind the quality of its products. For specific warranty details regarding your 51-inch Round Dining Table, please refer to the warranty card included with your purchase or contact Jocoevol customer support directly. Warranty terms typically cover manufacturing defects under normal use.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please do not hesitate to contact our customer support team. We are committed to providing excellent service and will respond to your inquiries within 24 hours.

Contact Information:

  • Email: support@jocoevol.com (Placeholder email, please refer to your product documentation for the correct contact.)
  • Online Support: Visit the official Jocoevol website for FAQs and additional resources.

© 2026 Jocoevol. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.