1. Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 660 lbs.
- Keep children and pets away from the sofa during assembly to prevent injury.
- Avoid standing or jumping on the sofa.
- Do not use abrasive cleaners or harsh chemicals on the fabric.
2. Package Contents
Verify that all parts are present before beginning assembly:
- Armrest (x2)
- Back Cushion
- Futon (Pull-out bed section)
- Seat Cushion
- Sofa frame
- Included Throw Pillow (x2)
3. Setup and Assembly
This sleeper sofa is designed for easy, tool-free assembly. Two adults can typically complete the assembly in approximately 10 minutes.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Connect Frame Sections: Align the modular sections of the sofa frame. The built-in component connectors (clips) are designed to snap together securely. Ensure each connection is firm.
- Attach Armrests: Slide the armrests onto the designated slots on the main sofa frame until they click into place.
- Place Cushions: Position the seat cushion, back cushion, and futon section onto the assembled frame.
No additional tools are required for assembly. Refer to the included visual instructions for detailed diagrams.
4. Operating Instructions
4.1 Converting to a Sleeper Bed
The sofa easily converts into a sleeper bed with a smooth pull-out mechanism.
- Clear the Area: Ensure there is sufficient space in front of the sofa for the pull-out section to extend fully.
- Pull Out Bed: Grasp the handle or strap located at the front base of the seat cushion. Gently pull the futon section outwards until it is fully extended and locked into place.
- Adjust Backrest (Optional): If desired, adjust the backrest to a flatter position for sleeping (see Section 4.2).
4.2 Adjusting the Backrest
The backrest features a 5-level adjustable mechanism, allowing angles from 105° to 180°.
- To Recline: Gently push the backrest forward slightly, then release. It will unlock, allowing you to adjust it to your desired angle.
- To Return Upright: Push the backrest fully forward until it clicks into the most upright position, then gently pull it back to engage the next desired angle.
4.3 Using Side Pockets
Each armrest is equipped with a built-in storage pocket for convenient access to small items.
- Use these pockets to store remote controls, mobile devices, books, or magazines.
- Avoid placing sharp or heavy objects in the pockets to prevent damage or tearing.
5. Maintenance
5.1 Fabric Care (Velvet)
The sofa is upholstered in 500GSM high-quality velvet fabric, known for its softness and durability.
- Regular Cleaning: Vacuum regularly using a soft brush attachment to remove dust and loose debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain and damage the velvet pile. For stubborn stains, use a mild, water-free solvent or dry-cleaning product. Test on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading.
- Pet-Friendly: While designed to be pet-friendly, regular grooming of pets and prompt cleaning of pet hair is recommended to maintain appearance.
5.2 General Care
- Frame: Wipe the frame and legs with a soft, damp cloth. Dry immediately.
- Moving the Sofa: When moving the sofa, lift it rather than dragging it to prevent damage to the legs and frame.
6. Troubleshooting
If you encounter any issues with your sleeper sofa, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sofa feels unstable or wobbly. | Loose connections or uneven floor. | Ensure all modular connections are fully engaged and secure. Check if the sofa is on a level surface. |
| Pull-out bed mechanism is stiff or not extending smoothly. | Obstruction or misaligned parts. | Check for any objects obstructing the mechanism. Ensure the pull-out section is aligned correctly with the main frame. Apply gentle, even pressure when pulling. |
| Backrest not adjusting properly. | Mechanism not fully disengaged or engaged. | Push the backrest fully forward until it clicks, then re-adjust to the desired angle. Ensure no fabric is caught in the mechanism. |
| Sofa makes creaking noises. | Loose frame components. | Re-check all assembly connections to ensure they are tight. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | tiramisubest |
| Model Number | Loveseat-Basic |
| Product Dimensions (D x W x H) | 34"D x 54"W x 33.1"H |
| Item Weight | 80 pounds |
| Weight Capacity Maximum | 660 pounds |
| Seating Capacity | 2 |
| Seat Depth | 25 inches |
| Seat Height | 17 inches |
| Arm Height | 22 inches |
| Arm Width | 4.3 inches |
| Seat Interior Width | 45 inches |
| Color | Black |
| Upholstery Fabric Type | Velvet |
| Frame Material Type | Wood |
| Fill Material | Sponge + Foam |
| Item Firmness Description | Medium Firm |
| Reclining Position Count | 5 |
| Recommended Number of People for Assembly | 2 |
8. Warranty and Support
For warranty information or customer support, please refer to the purchase documentation or contact tiramisubest customer service directly through the retailer where the product was purchased.
Please have your model number (Loveseat-Basic) and purchase date available when contacting support.