VECYS LYCZ628-B Self-Clean Bottom Loading Ice Maker Water Cooler Dispenser

1. Important Safety Information

Please read all instructions carefully before using this appliance to prevent injury or damage. Keep this manual for future reference.

• Electrical Safety: Ensure the appliance is connected to a properly grounded outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• Hot Water Safety: The hot water dispenser can reach high temperatures. Always use the child safety lock when dispensing hot water to prevent burns. Supervise children around the appliance.
• Appliance Placement: Place the dispenser on a firm, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
• Water Quality: Use only potable water. Do not use any other liquids in the dispenser.
• Damage: Do not operate the appliance if the power cord or plug is damaged, or if the unit malfunctions or has been dropped. Contact customer support.

Image: A child reaching for the water dispenser, illustrating the importance of the anti-scald safety lock switch. The dispenser features a child safety lock for hot water.

2. Product Overview

The VECYS LYCZ628-B is a versatile 4-in-1 bottom loading water cooler dispenser with an integrated ice maker. It provides hot, cold, and room temperature water, along with bullet-shaped ice cubes.

Image: The VECYS Self-Clean Bottom Loading Ice Maker Water Cooler Dispenser, showcasing its sleek design and 4-in-1 functionality.

Key Features:

• 4-in-1 Functionality: Dispenses hot water, cold water, room temperature water, and produces ice.
• Bottom Loading Design: Accommodates 3 or 5-gallon water bottles, eliminating heavy lifting. Features a built-in water pump and a 304 stainless steel water dispensing pipe.
• Ice Making Capacity: Produces up to 22 lbs of bullet-shaped ice daily, with 9 pieces per cycle in approximately 6-8 minutes.
• Child Safety Lock: Two-step hot water dispensing system for enhanced safety.
• Self-Clean Function: Built-in feature for easy and quick cleaning of the water cooler.
• Efficient Compressor: Utilizes a high-performance compressor for efficient ice making and cooling, with an eco mode for energy saving.
• ETL Approved: Ensures product safety and quality standards.

Image: The VECYS dispenser highlighting its ability to dispense hot water, cold water, fresh (room temperature) water, and ice cubes.

Image: The VECYS dispenser demonstrating its quick ice-making capability, producing 22 lbs per day and 9 bullet-shaped ice cubes per cycle in minutes.

Image: A graphic detailing the water refrigeration capacity (2L/hr, 1.5L tank, 42°F-212°F) and ice making capacity (22LBS/24Hrs, 6-8 mins, 1.1LBS storage).

3. Setup Instructions

1. Unpacking: Carefully remove the dispenser from its packaging. Retain packaging materials for future transport if needed.
2. Placement:
   • Place the unit on a flat, stable, and level surface.
   • Ensure there is at least 4 inches (10 cm) of clearance from walls on all sides for proper ventilation.
   • Avoid placing the unit in direct sunlight or near heat-generating appliances.
3. Water Bottle Installation:
   • Open the lower cabinet door.
   • Remove the cap from a new 3 or 5-gallon water bottle.
   • Insert the probe from the dispenser into the water bottle opening.
   • Slide the water bottle into the cabinet and close the door. The built-in pump will draw water.
4. Initial Priming:
   • Before plugging in, place a cup under each dispensing nozzle (hot, cold, room temperature).
   • Press each dispensing lever until water flows continuously from all three nozzles. This removes air from the lines.
5. Power Connection: Plug the power cord into a grounded 120V AC outlet.
6. Allow to Settle: After plugging in, wait at least 30 minutes before turning on the heating or cooling functions to allow the compressor fluids to settle.

4. Operating Instructions

4.1 Control Panel Overview

The control panel features indicators and buttons for various functions:

• Ice Making Indicator: Lights up when ice is being made.
• Energy Saving (ECO) Mode: Activates energy-saving operation.
• Child Lock Indicator: Shows if the child safety lock for hot water is active.
• Lack of Water Indicator: Illuminates when the water bottle is empty or low.
• Hot Water Indicator: Lights up when hot water is ready.
• Cold Water Indicator: Lights up when cold water is ready.

4.2 Dispensing Water

• Cold Water: Place a cup under the cold water nozzle. Press the cold water dispensing lever.
• Room Temperature Water: Place a cup under the room temperature water nozzle. Press the room temperature water dispensing lever.
• Hot Water: Place a cup under the hot water nozzle. Simultaneously press the child safety lock button and the hot water dispensing lever. Release both once water starts flowing.

4.3 Making Ice

• Ensure the unit is powered on and has water.
• The ice making function will typically start automatically. The "Ice Making" indicator will illuminate.
• Ice cubes will be produced in cycles, approximately 9 pieces every 6-8 minutes.
• To dispense ice, place a cup under the ice outlet and press the ice dispensing button/lever.

Image: Close-up view of the ice outlet and water outlets (hot, fresh, cold) on the VECYS dispenser, with the child safety lock indicated.

5. Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity of your dispenser.

5.1 Self-Clean Function

• The unit features a built-in self-clean function. Refer to the control panel for the specific self-clean button or indicator.
• Follow the instructions in the display or manual for activating the self-clean cycle. This process helps sanitize the internal water paths.
• It is recommended to run the self-clean cycle periodically, especially when changing water bottles or if the unit has not been used for an extended period.

5.2 Exterior Cleaning

• Unplug the dispenser from the power outlet before cleaning.
• Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Clean the drip tray regularly by removing it, emptying any collected water, washing with mild soap and water, and then reinserting it.

Image: People enjoying water from the VECYS dispenser, emphasizing the importance of clean water and easy operation.

6. Troubleshooting Guide

Before contacting customer service, please refer to the following common issues and solutions.

7. Product Specifications

Image: The VECYS dispenser displaying its dimensions (17.7"D x 14.4"W x 44.1"H) and suggesting suitable locations like kitchen, dormitory, and restaurant.

8. Warranty and Customer Support

For warranty information, product support, or any inquiries not covered in this manual, please contact VECYS customer service. Contact details are typically found on the product packaging or the official VECYS website.

When contacting support, please have your model number (LYCZ628-B) and purchase information readily available.