Virubi 60-inch Floating Double Sink Bathroom Vanity User Manual

1. Introduction

Thank you for choosing the Virubi 60-inch Floating Double Sink Bathroom Vanity. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new vanity. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Information

Please observe the following safety precautions during installation and use:

• Always ensure the wall is structurally sound and capable of supporting the weight of the vanity and its contents. Consult a professional if unsure.
• Use appropriate wall anchors and mounting hardware for your specific wall type.
• Exercise caution when handling heavy components to prevent injury. It is recommended to have at least two people for assembly and installation.
• Keep small parts and hardware out of reach of children to prevent choking hazards.
• Ensure all water connections are properly sealed to prevent leaks.
• Do not overload drawers or shelves beyond their specified weight capacity.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Vanity Cabinet (Wall-mounted, Wood w/2 Drawers)
• SMC Resin Double Sink Top
• Assembly Hardware (screws, brackets, etc.)
• Instruction Manual

Note: Faucets, drains, and P-traps are not included and must be purchased separately.

4. Setup and Installation

This Virubi vanity is designed for wall-mounted installation. Assembly is required. Please follow the included detailed instructions and diagrams carefully.

4.1 Pre-Installation Steps

1. Unpack and Inspect: Carefully remove all items from the packaging. Inspect for any damage or missing parts.
2. Gather Tools: You will need basic tools such as a drill, level, measuring tape, screwdriver, and possibly a stud finder.
3. Prepare Wall: Determine the desired mounting height. Ensure the wall area is clear of electrical wires or plumbing before drilling. Locate wall studs for secure mounting if possible.

4.2 Assembly and Mounting

Refer to the detailed assembly instructions provided in the package for step-by-step guidance. The general process involves:

1. Assembling the vanity cabinet structure.
2. Attaching mounting brackets to the cabinet.
3. Marking and drilling holes on the wall for mounting.
4. Securely mounting the cabinet to the wall.
5. Placing the SMC resin sink top onto the cabinet.
6. Installing faucets and connecting plumbing (not included).

Figure 4.1: Overall and internal dimensions of the vanity.

Figure 4.2: Detailed sink and cabinet dimensions.

4.3 Installation Video Guide

For a visual guide on the vanity's features and potential installation steps, please refer to the video below:

5. Operating Instructions

Your Virubi vanity is designed for ease of use and organization.

5.1 Soft-Closing Doors and Drawers

The vanity features two soft-closing doors and two soft-closing drawers. This mechanism ensures quiet and secure closure, preventing slamming and extending the lifespan of the hardware.

Figure 5.1: Soft-close hinges and drawer glides.

5.2 Storage Organization

The vanity offers ample storage space for toiletries, cosmetics, and cleaning supplies. The top drawer includes dividers for organizing smaller items, helping to keep your bathroom neat and uncluttered.

Figure 5.2: Internal storage and organization features.

6. Maintenance

Proper care will ensure the longevity and appearance of your Virubi vanity.

• Cleaning the Cabinet: Wipe the wood grain melamine finish with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Cleaning the Sink: The SMC resin sink is lightweight and impact-resistant. Clean with mild soap and water. Do not use abrasive pads or strong chemical cleaners, which can scratch or dull the surface.
• Spills: Wipe up spills immediately to prevent water damage or staining, especially on the cabinet surfaces.
• Hardware: Periodically check and tighten any loose screws on hinges, drawer glides, and handles.

7. Troubleshooting

Here are solutions to common issues you might encounter:

7.1 Drawers or Doors Not Closing Properly

• Check for Obstructions: Ensure nothing is blocking the drawer glides or door hinges.
• Adjust Hinges/Glides: Soft-close hinges and glides often have adjustment screws to fine-tune alignment. Refer to the specific hardware instructions if available.
• Leveling: Ensure the vanity is level on the wall. An unlevel installation can affect door and drawer alignment.

7.2 Water Leaks

• Check Plumbing Connections: Inspect all faucet, drain, and P-trap connections for tightness. Ensure plumber's tape or sealant was used correctly during installation.
• Sink Overflow: Ensure the overflow hole is clear and not blocked.

7.3 Scratches or Dents

• Minor scratches on the wood grain melamine finish may be touched up with a furniture repair pen matching the wood color.
• For significant damage, contact customer support for advice.

8. Specifications

9. Warranty and Support

Your Virubi Bathroom Vanity comes with a 6-month warranty on assembly-related components. This warranty covers manufacturing defects and issues arising from normal use within the specified period.

If you experience any damage to the bathroom vanity upon arrival or during assembly, or if you have any questions regarding its installation, operation, or maintenance, please do not hesitate to contact our customer service team. We are committed to providing satisfactory service and support.

Please retain your proof of purchase for warranty claims.