1. Introduction
Thank you for choosing the KOTEK PI-HW760 3-Piece Patio Bistro Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.
Image 1.1: The KOTEK 3-Piece Patio Bistro Set, featuring two chairs with navy cushions and a square tempered glass table, suitable for outdoor spaces.
2. Safety Information
- Ensure all components are securely fastened before use. Periodically check and tighten all bolts and screws.
- Do not exceed the weight capacity: Table 100 lbs, Each Chair 400 lbs.
- Place the furniture on a flat, stable surface to prevent tipping.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Avoid prolonged exposure to extreme weather conditions to extend product lifespan.
- Do not stand on the chairs or table.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact KOTEK customer support.
- 1 x Table
- 2 x Chair
- 2 x Back Cushion
- 2 x Seat Cushion
- 1 x Instruction Manual
4. Setup and Assembly
Assembly of the KOTEK 3-piece wicker furniture set is straightforward with the included instructions. Please follow these general guidelines:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all hardware and components using the parts list in the separate instruction sheet.
- Begin assembling each piece according to the step-by-step diagrams.
- Important Tip: Do not tighten screws completely until all holes are aligned and all components are loosely fixed. This allows for easier adjustment during assembly.
- Once all parts are in place, gradually tighten all screws evenly.
- Attach the cushions to the chairs.
Image 4.1: Detailed product dimensions for the chairs (22.5''L x 22.5''W x 32.5''H) and table (20''L x 20''W x 28''H), along with weight capacities: 400 lbs per chair and 100 lbs for the table.
5. Operating and Usage
The KOTEK Patio Bistro Set is designed for outdoor use, providing a comfortable and functional seating area.
- Chairs: The wicker patio chairs feature wide seats with ergonomically curved backrests and armrests for comfortable support. Each chair includes a back cushion and a seat cushion filled with high-density rebound sponge.
- Table: The 28-inch high bistro table is equipped with a tempered glass tabletop, which is crack-resistant and easy to clean. It also includes a practical lower storage shelf for convenience.
- Stability: Adjustable foot pads are included to ensure stability on uneven outdoor surfaces.
Image 5.1: Close-up view of the comfortable seat and back cushions, highlighting the soft and elastic sponge filling and zippered covers for easy removal.
Image 5.2: Detailed view of the 2-tier bistro table, showing the tempered glass tabletop secured by 4 suction cups and an additional rattan shelf below for storage.
Image 5.3: Key structural features including curved armrests for comfort, a heavy-duty metal frame for durability, and adjustable foot pads for stability on various surfaces.
6. Maintenance
Proper maintenance will ensure the longevity and appearance of your patio bistro set.
- PE Rattan: The weather-resistant PE rattan is durable and fadeless. Clean with a soft cloth and mild soap solution. Rinse thoroughly and dry completely. Avoid harsh chemicals.
- Cushions: The seat cushion covers are designed with zippers, making them detachable and washable. Machine wash cold on a gentle cycle or hand wash. Air dry only.
- Tempered Glass Tabletop: The tabletop is crack-resistant and easy to clean with a damp cloth. For stubborn stains, use a glass cleaner.
- Metal Frame: Wipe the metal frame with a damp cloth. If rust appears, clean with a wire brush and apply rust-inhibiting paint.
- General Care: To prolong the service life, it is recommended to cover the furniture during prolonged periods of non-use or severe weather conditions. Avoid prolonged rain exposure.
Image 6.1: Close-up of the premium mix brown PE rattan, highlighting its sunproof, hand-woven, and breathable qualities. Note: Avoid rain exposure for prolonged service life.
7. Troubleshooting
This section addresses common issues you might encounter.
- Wobbling Furniture: Ensure all bolts are tightened evenly. Use the adjustable foot pads on the chairs and table to level the furniture on uneven surfaces.
- Difficulty during Assembly: If holes do not align, loosen all screws slightly, adjust the components, and then retighten. Refer to the assembly instructions provided in the package.
- Cushion Care: If cushions become wet, remove covers and allow foam inserts to air dry completely before reinserting.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | KOTEK |
| Model Number | PI-HW760 |
| Color | Mix Brown & Navy |
| Material Type | PE Rattan, Metal, Tempered Glass, Polyester, Sponge |
| Table Dimensions (L x W x H) | 20'' x 20'' x 28'' |
| Chair Dimensions (L x W x H) | 22.5'' x 22.5'' x 32.5'' |
| Seat Height (without cushion) | 16'' |
| Weight Capacity of Table | 100 lbs |
| Weight Capacity of Each Chair | 400 lbs |
| Net Weight | 40 lbs |
| Assembly Required | Yes |
| Additional Features | Storage Shelf, Adjustable Foot Pads |
9. Warranty and Support
KOTEK stands behind the quality of its products. For specific warranty information, please refer to the warranty card included with your purchase or visit the official KOTEK website.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact KOTEK customer support through the retailer where the product was purchased or via the contact information provided on the KOTEK brand store page.
We are committed to providing excellent service and support for your KOTEK products.
