Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your CooSpo Electric SUP Pump AP-WAVE20. Designed for inflating and deflating various outdoor equipment such as paddleboards, kayaks, and inflatable camping gear, this pump features a high-pressure capability up to 20 PSI, a rechargeable battery, and intelligent pressure control. Please read this manual thoroughly before first use and retain it for future reference.
Safety Instructions
- Do not operate the pump in wet conditions or immerse it in water.
- Keep the pump away from children and pets.
- Ensure the correct nozzle is used for the item being inflated to prevent damage or injury.
- Do not exceed the recommended pressure for your inflatable item. The pump features automatic shut-off to prevent over-inflation.
- Avoid blocking the air intake or exhaust ports during operation.
- Do not leave the pump unattended while in use.
- If the pump overheats, allow it to cool down before resuming operation. The pump has integrated overheat protection.
- Use only the provided charging cable and car charger.
Package Contents
Verify that all items are present in the package:
- 1 x CooSpo Electric Paddleboard Pump
- 7 x Interchangeable Air Nozzles
- 1 x Type-C Charging Cable
- 1 x 12V DC Car Charger
- 1 x Flexible Air Hose
- 1 x User Manual (this document)
Image: Contents of the CooSpo Electric SUP Pump package, showing the pump, hose, nozzles, and charging accessories.
Product Overview and Features
The CooSpo Electric SUP Pump AP-WAVE20 is designed for convenience and efficiency in inflating and deflating outdoor gear.
Key Features:
- Two-Stage Inflation: Features a rapid inflation stage (230 L/min) for quick volume fill, followed by a precise high-pressure stage (120 L/min) up to 20 PSI. Automatic switching between stages ensures efficient inflation.
- Rechargeable Battery: Equipped with 3 x 21700 4000 mAh batteries (32.76 Wh) for extended use. A full charge can inflate up to 3 paddleboards (3.2m) to 12 PSI. Supports 30W fast charging via Type-C and 12V DC car power.
- Intelligent Pressure Control: High-precision LED digital display allows pressure setting from 0.3 to 20 PSI. Automatic shut-off prevents over-inflation.
- Universal Compatibility: Includes 7 interchangeable nozzles for use with SUPs, kayaks, air mattresses, camping tents, inflatable floats, and more.
- Inflation and Deflation: Supports both inflation and rapid deflation functions for easy packing and storage.
- Quiet Operation: Improved sound-insulated structure reduces noise level to ≤ 90 dB at 1.5 meters.
- Safety Protections: Integrated overheat protection and stable operation within 0-45° C.
Image: Detailed view of the pump's intelligent LED digital display for pressure monitoring and settings.
Image: Information on the pump's extended battery life and charging capabilities.
Image: Visual representation of the pump's ultra-fast two-stage inflation process.
Image: Illustrates the pump's quiet and safe operation features, including noise level and overheat protection.
Image: Demonstrates the pump's dual functionality for both inflation and rapid deflation.
Setup
- Charge the Pump: Before first use, fully charge the pump using the provided Type-C charging cable and a compatible adapter, or the 12V DC car charger. The LED display will indicate the battery level.
- Attach the Hose: Connect one end of the flexible air hose to the pump's inflation port (usually on the right side when facing the display). Ensure it is securely twisted into place.
- Select the Correct Nozzle: Choose the appropriate nozzle from the 7 interchangeable options for your inflatable item. Attach it securely to the other end of the air hose.
- Connect to Inflatable: Insert the nozzle into the valve of your paddleboard, kayak, or other inflatable. Ensure a snug fit to prevent air leakage.
Image: The CooSpo Electric SUP Pump, illustrating its compact form factor.
Operating Instructions
Inflation:
- Power On: Press the power button (ⓘ) to turn on the pump. The LED display will light up.
- Set Target Pressure: Use the '+' and '-' buttons to adjust the desired pressure (PSI or KPA). Refer to your inflatable's manufacturer recommendations for the correct pressure.
- Start Inflation: Press the 'START' button. The pump will begin inflating in the rapid fill stage, then automatically switch to the high-pressure stage as it approaches the target pressure.
- Automatic Shut-off: The pump will automatically stop once the set pressure is reached.
- Disconnect: Disconnect the hose from the inflatable and the pump.
Deflation:
- Attach Hose for Deflation: Connect one end of the flexible air hose to the pump's deflation port (usually on the left side when facing the display).
- Connect to Inflatable: Attach the appropriate nozzle to the other end of the hose and insert it into the inflatable's valve.
- Start Deflation: Press the power button, then press the 'START' button. The pump will begin to extract air from the inflatable.
- Stop Deflation: Press the power button or 'START' button again to stop the deflation process.
- Disconnect: Disconnect the hose from the inflatable and the pump.
Image: Illustrates the efficiency of the electric pump compared to manual inflation.
Maintenance
- Cleaning: Wipe the pump's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the pump and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose is not kinked during storage.
- Battery Care: For optimal battery life, charge the pump fully before long-term storage and recharge it every 3-6 months if not in use.
- Nozzle Care: Keep the nozzles clean and free from debris to ensure proper sealing and efficient operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not turn on. | Low battery or no charge. | Charge the pump fully using the Type-C cable or car charger. |
| Pump inflates slowly or not to target pressure. | Incorrect nozzle, hose not securely attached, or air leak. | Ensure the correct nozzle is used and securely attached. Check hose connections for leaks. Verify the inflatable's valve is properly sealed. |
| Pump stops unexpectedly. | Overheat protection activated or target pressure reached. | Allow the pump to cool down. Check the set pressure on the display. |
| Excessive noise during operation. | Normal operation during high-pressure stage. | This is typical for high-pressure pumps. Ensure the pump is on a stable surface. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AP-WAVE20 |
| Brand | CooSpo |
| Material | Acrylonitrile Butadiene Styrene |
| Item Weight | 1.53 Kilograms |
| Product Dimensions (L x W x H) | 22.3L x 17.2W x 8.6H centimeters |
| Power Source | Battery (Lithium Ion) / 12V DC Car Power |
| Air Flow Capacity (Stage 1) | 230 Liters per minute |
| Air Flow Capacity (Stage 2) | 120 Liters per minute |
| Maximum Pressure | 20 PSI |
| Battery Capacity | 12000 mAh (3 x 4000 mAh, 32.76 Wh) |
| Charging | Type-C (30W fast charge), 12V DC Car Charger |
| Noise Level | ≤ 90 dB at 1.5 meters |
| Operating Temperature | 0 - 45°C |
| Country of Origin | China |
Warranty
The CooSpo Electric SUP Pump AP-WAVE20 comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact CooSpo customer support. Refer to the contact information provided with your purchase or visit the official CooSpo website for the most up-to-date support details.
You can also visit the CooSpo Store on Amazon for more product information and updates.