1. Introduction
Thank you for choosing the Jojoka Twin Size Bed Frame. This bed frame is designed to provide a comfortable and functional sleeping solution, featuring a velvet upholstered rainbow headboard with integrated RGB LED lights and four convenient under-bed storage drawers. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new bed frame.
Image 1.1: Fully assembled Jojoka Twin Size Bed Frame in a bedroom setting.
2. Safety Information
Please read all safety warnings and instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Adult Assembly Required: This product must be assembled by adults. Keep children away during the assembly process.
- Small Parts: Keep all small parts and packaging materials away from children to prevent choking hazards.
- Weight Limit: Do not exceed the maximum weight capacity of 750 LBS for the bed frame.
- Level Surface: Always place the bed frame on a flat, level, and stable surface.
- Regular Checks: Periodically check all bolts and screws to ensure they are tight and secure. Retighten as necessary.
- Electrical Safety: Ensure the LED light power adapter is connected to a suitable power outlet. Do not expose LED components to water or excessive moisture.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Headboard (Velvet Upholstered with LED strip)
- Footboard
- Side Rails (2)
- Wood Slats (Multiple pieces)
- Support Legs (for frame and slats)
- Storage Drawers (4, with wheels)
- LED Light Remote Control
- LED Light Power Adapter
- Assembly Hardware (screws, bolts, washers, Allen wrench)
Image 3.1: Diagram illustrating the dimensions and structural components of the bed frame.
4. Setup and Assembly Instructions
Assembly typically takes approximately 35 minutes with two adults. No additional tools are required beyond those provided.
- Unpack and Organize: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches. Identify each part using the provided parts list.
- Assemble Headboard and Footboard: Attach any necessary support legs or brackets to the headboard and footboard as indicated in the detailed assembly diagram (refer to the separate assembly sheet included in the package).
- Attach Side Rails: Connect the two side rails to the assembled headboard and footboard using the provided bolts and Allen wrench. Ensure all connections are secure but do not fully tighten until the frame is aligned.
- Install Center Support and Slats: Place the center support beam (if included) and its legs. Then, unroll or individually place the wood slats across the side rails. Ensure the silent strips are properly positioned to reduce friction noise. Secure the slats to the side rails using the designated fasteners. Fully tighten all frame bolts now.
- Assemble Storage Drawers: Follow the instructions for assembling the four storage drawers. Attach the wheels to the bottom of each drawer.
- Insert Storage Drawers: Slide the assembled drawers into the designated spaces under the bed frame. The drawers can be positioned on either side of the bed.
- Install LED Light Strip: The RGB LED light strip is pre-installed in the headboard. Connect the LED light strip cable to the power adapter, and then plug the adapter into a standard electrical outlet.
Image 4.1: Detailed view of the bed frame's construction, highlighting the noise-free slat system and soft headboard material.
5. Operating Instructions
5.1 RGB LED Lights
The integrated RGB LED lights in the headboard offer customizable lighting options to enhance your bedroom atmosphere.
- Control Methods: The LED lights can be controlled via a dedicated mobile application, the included remote control, or directly through the adapter's button.
- Mobile App Control: Download the recommended app (refer to the QR code or app name provided with the LED kit) from your device's app store. Follow the in-app instructions to pair your device with the LED lights. The app allows access to over 16 million colors, 20+ preset light effects (including brightness, flash, and wave modes), and various functional modes such as music sync, microphone sync, and timing mode.
- Remote Control: Use the remote control to power the lights on/off, change colors, adjust brightness, and select from various dynamic modes. Ensure the remote has a working battery and is pointed towards the LED receiver.
- Adapter Control: A button on the power adapter allows for basic control, typically cycling through a few colors or turning the lights on/off.
Image 5.1: Illustration of the RGB LED lights in operation and the mobile application control interface.
5.2 Storage Drawers
The four under-bed storage drawers provide ample space for organizing various items, helping to keep your bedroom tidy.
- Placement: The drawers are designed to be flexible and can be placed on the left side, the right side, or split between both sides of the bed frame, depending on your preference and room layout.
- Operation: Each drawer is equipped with smooth-rolling wheels for easy access. They can be easily pulled out and pushed back in. A locking mechanism ensures the drawers stay in place when not in use.
Image 5.2: View of the under-bed storage drawers, demonstrating their capacity and accessibility.
6. Maintenance
Proper care and maintenance will extend the life and appearance of your Jojoka bed frame.
- Upholstery Cleaning: For the velvet upholstered headboard and frame, spot clean with a mild, damp cloth and a gentle upholstery cleaner. Blot spills immediately. Avoid harsh chemicals or abrasive cleaners.
- Frame Cleaning: Wipe down the metal and engineered wood components with a soft, damp cloth. Dry thoroughly.
- LED Lights: Keep the LED light strip and power adapter dry. Do not attempt to clean the LED strip with liquids directly. If dusty, gently wipe with a dry, soft cloth.
- Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any loose hardware to maintain stability and prevent squeaking.
- Drawer Maintenance: Keep the drawer wheels and tracks free of dust and debris to ensure smooth operation.
7. Troubleshooting
If you encounter any issues with your bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not turning on. | Power adapter unplugged, remote battery dead, app not connected. | Check if the power adapter is securely plugged into the outlet and the LED strip. Replace remote control batteries. Re-pair the mobile app with the LED lights. |
| Bed frame is squeaking or unstable. | Loose bolts or screws, slats not properly seated. | Inspect all assembly hardware and tighten any loose bolts or screws. Ensure all wood slats are correctly positioned and secured with the silent strips. |
| Storage drawers are difficult to open/close. | Obstruction in the wheels or tracks, misaligned drawer. | Check the drawer wheels and tracks for any debris or obstructions. Ensure the drawer is properly aligned within its designated space. |
| LED lights are flickering or inconsistent. | Loose connection, power supply issue. | Check all connections between the LED strip and the power adapter. Try plugging the adapter into a different power outlet. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PHK_35HNBUAMy |
| Product Dimensions (L x W x H) | 75.98" x 38.98" x 43.31" |
| Bed Size | Twin |
| Material | Engineered Wood, Sherpa Fabric, Metal Structure, Solid Wooden Legs |
| Color | Grey |
| Weight Capacity | Up to 750 LBS |
| Special Features | RGB LED Lighting, 4 Under-bed Storage Drawers, Noise-Free Wood Slats |
| Assembly Required | Yes (Approx. 35 minutes) |
| UPC | 828700622540 |
9. Warranty and Support
Your Jojoka Twin Size Bed Frame is covered by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your purchase or contact our customer support team. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please reach out to Jojoka customer service through the retailer where the product was purchased or visit the official Jojoka website for contact information.
We are committed to providing high-quality products and support to ensure your satisfaction.