Mirtade Hydrogen Water Bottle Generator Instruction Manual

Introduction

Thank you for choosing the Mirtade Hydrogen Water Bottle Generator. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new device. Please read it thoroughly before first use and keep it for future reference.

Safety Information

• Always use purified, filtered, distilled, or reverse osmosis water for optimal performance and to prevent damage to the electrolysis components.
• Do not immerse the base unit in water. The bottle is designed for hand washing only.
• Keep out of reach of children.
• Ensure the charging port is dry before connecting the charging cable.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• The device operates under pressure. Always release pressure using the pressure relief button before opening the lid after a hydrogen generation cycle.

Package Contents

Verify that all items are present in the package:

• Mirtade Hydrogen Water Bottle Generator (Gray)
• Charging Cable (USB-C)
• Instruction Manual

Product Overview

The Mirtade Hydrogen Water Bottle Generator utilizes advanced SPE/PEM technology to produce hydrogen-rich water. It features a durable 316 stainless steel drinking spout, an ergonomic handle for portability, and an LED display for real-time information.

Image: The Mirtade Hydrogen Water Bottle Generator displaying its ability to produce over 10,000 PPB hydrogen concentration in 10 minutes, with options for 5-minute (7800+ PPB) and 10-minute (10000+ PPB) cycles.

Key Features:

• High Hydrogen Concentration: Achieves 7,800+ PPB in 5 minutes and 10,000+ PPB in 10 minutes.
• Advanced SPE/PEM Technology: Ensures complete separation of hydrogen and oxygen, producing pure hydrogen water without ozone or residual chlorine.
• Durable Construction: Made with 316 stainless steel and robust materials to withstand internal pressures and prevent leaks.
• Portable Design: Features an ergonomic handle and compact 12oz size (9.77" H × 2.76" W) for easy transport.
• Smart LED Display: Shows real-time hydrogen concentration, countdown timer, and battery status.
• Self-Cleaning Mode: Simplifies maintenance by keeping the bottle interior clean.

Setup

Initial Preparation:

1. Remove the Silicone Plug:

   Upon receiving the bottle, you may find a small amount of purified water pre-filled in the silicone plug. This is normal and helps keep the membrane active. Remove this silicone plug before first use.

   

   Image: A hand removing the silicone plug from the bottom of the hydrogen water bottle.

2. Charge the Device:

   Fully charge the hydrogen water bottle before its first use. A full charge takes approximately 2 hours and supports 125 minutes of continuous working time (25 cycles in 5-minute mode or 12 cycles in 10-minute mode).

Operating Instructions

1. Fill the Bottle with Water:

   Unscrew the lid and fill the bottle with purified, filtered, distilled, or reverse osmosis water. Do not use tap water directly as it may contain minerals that can affect performance and longevity. Fill to the indicated maximum fill line.

   

   Image: A person pouring purified water into the hydrogen water bottle.

2. Select Mode:

   Press the power button once to start the 5-minute mode for hydrogen water generation (7,800+ PPB). To activate the 10-minute mode for ultra-high concentration hydrogen water (10,000+ PPB), press the button again within 20 seconds of starting the 5-minute mode.

   

   Image: A hand pressing the button on the base of the hydrogen water bottle to select a mode, with bubbles visible inside the bottle.

3. Release Pressure and Drink:

   After the hydrogen generation cycle is complete, press the pressure relief button located on the lid to release any internal pressure. Then, unscrew the lid to drink your hydrogen water.

   

   Image: A hand pressing the pressure relief button on the lid of the hydrogen water bottle.

Official Product Video:

Maintenance

• Cleaning: The bottle features a self-cleaning mode. Activate this mode periodically to keep the interior clean without manual effort or disassembly. For external cleaning, wipe with a damp cloth. The bottle is hand wash only; do not place in a dishwasher.
• Storage: When not in use for extended periods, ensure the bottle is clean and dry. Store in a cool, dry place.

Troubleshooting

Common Issues and Solutions:

Image: An informational graphic detailing common initial observations and troubleshooting tips for the hydrogen water bottle, including water inside upon arrival, lack of bubbles, and minor leakage.

Specifications

Warranty and Support

The Mirtade Hydrogen Water Bottle Generator comes with a one-year warranty from the date of purchase. Mirtade also provides lifetime technical support for this product.

For usage guidance, troubleshooting assistance, or after-sales support, please contact Mirtade customer service. Refer to the contact information provided in your product packaging or on the official Mirtade website.