1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your AROEVE AP04 Air Purifier. Please read it thoroughly before using the appliance and retain it for future reference.
2. Safety Instructions
- Always place the air purifier on a firm, level surface.
- Ensure the power cord is not damaged or pinched.
- Do not operate the appliance near water or in excessively humid environments.
- Keep the air inlet and outlet clear of obstructions.
- Unplug the air purifier before cleaning or performing any maintenance.
- Do not allow children to operate the appliance without supervision.
- This appliance is for indoor use only.
3. Product Overview
Components and Features
The AROEVE AP04 Air Purifier is designed to improve indoor air quality by filtering various airborne particles. Key features include an air quality sensor, multiple fan speeds, a timer function, and a quiet sleep mode.

Control Panel
The control panel is located on the top of the unit and features touch-sensitive buttons for various functions and an indicator light for air quality.

4. Setup
4.1 Unpacking
- Carefully remove the air purifier from its packaging.
- Remove all plastic packaging materials from the unit and the filter.
4.2 Filter Installation
The air purifier comes with a filter that needs to be installed before first use. Ensure the plastic packaging is removed from the filter.

- Locate the filter cover on the side of the unit.
- Grab the rope or tab on the filter cover and gently pull to open it.
- Remove the new filter from its plastic packaging.
- Insert the filter into the compartment, ensuring it is correctly positioned.
- Close the filter cover securely.
4.3 Placement
Place the air purifier in a location where air can circulate freely around it. Avoid placing it directly against walls or furniture that might block the air intake or outlet.
5. Operating Instructions
5.1 Power On/Off
Plug the power cord into a suitable electrical outlet. Press the power button on the control panel to turn the unit on or off.
5.2 Fan Speed Modes
Press the fan speed button to cycle through available fan speeds: 1 (low), 2 (medium), and Auto mode. In Auto mode, the fan speed adjusts automatically based on detected air quality.
5.3 Timer Settings
Press the timer button to set the operating duration. Available options are 8 hours, 12 hours, and 24 hours. The unit will automatically turn off after the selected time.
5.4 Sleep Mode
Activate sleep mode for quiet operation. In this mode, the fan runs at a low speed with minimal noise, and all indicator lights turn off to avoid disturbance.

5.5 Air Quality Indicator
The built-in dust sensor automatically detects air quality and displays it via an indicator light on the top of the unit:
- Blue: Good air quality
- Yellow: Moderate air quality
- Red: Poor air quality

6. Maintenance
6.1 Filter Replacement
To maintain optimal purification performance, replace the air filter every 3-5 months. The replacement process is the same as the initial installation (refer to Section 4.2).

6.2 Cleaning the Unit
- Wipe the exterior of the air purifier with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Periodically clean the air intake and outlet grilles with a soft brush or vacuum cleaner attachment to remove dust buildup.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Power cord not connected; Unit damaged | Check power outlet; Ensure power cord is securely plugged in; Contact customer support |
| Weak airflow | Filter clogged; Air inlets/outlets blocked | Replace filter; Clear any obstructions |
| Unusual noise | Foreign object inside; Unit not on a level surface | Unplug and check for foreign objects; Place on a stable, flat surface |
| Poor purification effect | Filter needs replacement; Room size too large | Replace filter; Ensure unit is suitable for room size |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | AP04 |
| Product Dimensions (L x W x H) | 13.5 x 7.5 x 17.25 inches |
| Item Weight | 8.18 Pounds |
| Power Source | AC |
| Control Method | Touch Button Control |
| Filter Type | Pre-Filter (Multi-layer filtration system) |
| Recommended Floor Area | Up to 1095 Square Feet (for 1 air change per hour) |
| Noise Level | 22 Decibels (in Sleep Mode) |
| Particle Retention Size | 0.3 Micron |
| Wattage | 34 watts |
| Contaminant Filtration Capability | Cigarette smoke, dust, odors, pet dander, pollen |
| Special Features | Portable, Air Quality Sensor, Auto Function, Ultra-Quiet Sleep Mode |

9. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact AROEVE customer service through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.







