1. Introduction
Thank you for choosing the Galnolt LED Desk Lamp FDDL16. This manual provides essential information for the safe and efficient use of your new desk lamp. Designed for optimal lighting in home offices, for reading, studying, and workbench tasks, this lamp features an adjustable swing arm, dimmable eye care technology, and dual-light illumination. Please read these instructions carefully before use and retain them for future reference.
2. Package Contents
Before assembly, please verify that all components are present and undamaged.
Image: Package contents including the lamp, base, adapter, screw set, and user manual.
- Dual light source light bar bracket
- Power adapter (with 200 cm cable)
- Metal non-slip base
- Screw set (including 2 spare screws and a screwdriver)
- User manual
3. Setup and Assembly
Follow these steps to assemble your Galnolt LED Desk Lamp:
- Insert the lamp post into the base: Align the lamp post with the opening in the metal base and gently insert it.
- Secure with screws: Take two screws from the provided screw set (4 total, 2 spare) and align them with the mounting holes on the base.
- Tighten screws: Use the supplied screwdriver to tighten the screws flush with the base. Ensure no screw heads are protruding.
- Connect power adapter: Plug the supplied adapter into the power port on the desk lamp. Then, plug the adapter into a suitable power outlet.
Image: Visual guide for lamp assembly, showing insertion of the lamp post, screw placement, tightening, and power connection.
4. Operating Instructions
4.1. Power and Basic Controls
Image: Detail of the touch control panel with icons for color temperature, brightness, and power/timer.
- On/Off: Short press the power button (⏻) to turn the lamp on or off.
- 30-Minute Timer: Long press the power button (⏻) for 3 seconds to activate the 30-minute auto shut-off timer. The lamp will turn off automatically after 30 minutes.
4.2. Adjusting Brightness and Color Temperature
Image: Visual representation of the lamp's 5 brightness levels (20%-100%) and 4 color temperature settings (3000K-6500K).
- Brightness Control: Short press the brightness control button (☀) to cycle through 5 brightness levels (20%, 40%, 60%, 80%, 100%).
- Color Temperature (CCT) Modes: Short press the color temperature button (M) to switch between 4 color temperatures: 3000K (Warm White), 4000K (Natural White), 5000K (Cool White), and 6500K (Daylight White).
- Memory Function: The lamp remembers your last used brightness and color temperature settings and will restore them when turned on again.
4.3. Adjusting the Lamp Arm
Image: Examples of various lamp arm positions, demonstrating its flexibility for different lighting needs.
The Galnolt LED Desk Lamp features 4 rotatable joints, allowing for extensive adjustment of the light direction and angle. Gently pivot the lamp head and arm sections to achieve your desired lighting position for tasks such as reading, working on a computer, or crafting.
Image: Technical drawing showing the lamp's dimensions and the range of motion for its 4 rotatable joints, including 270-degree and 195-degree rotation points.
5. Maintenance
To ensure the longevity and optimal performance of your Galnolt LED Desk Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp body and base. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Dust Removal: Regularly dust the lamp to prevent accumulation, which can affect light output and heat dissipation.
- Handling: Avoid excessive force when adjusting the lamp's arm and joints. While designed for flexibility, rough handling can cause damage.
- Storage: If storing the lamp for an extended period, ensure it is clean, dry, and stored in a safe place away from extreme temperatures or humidity.
6. Troubleshooting
If you encounter any issues with your Galnolt LED Desk Lamp, please refer to the following common troubleshooting steps:
- Lamp does not turn on:
- Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet.
- Check if the power outlet is functional by plugging in another device.
- Verify that the power button has been pressed correctly.
- Light flickers or is dim:
- Ensure the power connection is stable.
- Adjust the brightness level using the brightness control button.
- Controls are unresponsive:
- Disconnect the lamp from power for a few minutes, then reconnect it to reset the controls.
- Ensure your fingers are clean and dry when using the touch controls.
If these steps do not resolve the issue, please contact customer support for further assistance.
7. Specifications
| Model Number | FDDL16 |
| Brand | Galnolt |
| Product Dimensions | 7.8"D x 27.7"W x 26.9"H |
| Material Type | Aluminum+Nylon |
| Light Source Type | LED |
| Wattage | 12 watts |
| Voltage | 24 Volts |
| Control Method | Touch |
| Number of Light Sources | 2 |
| Color Temperature Modes | 4 (3000K-6500K) |
| Brightness Levels | 5 (20%-100%) |
| Additional Features | Adjustable Swing Arm, Timing Function, Memory Function |
8. Warranty Information
This Galnolt LED Desk Lamp FDDL16 is covered by a manufacturer's warranty for 720 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
9. Support
For technical support, warranty claims, or any questions regarding your Galnolt LED Desk Lamp FDDL16, please contact the manufacturer or your retailer. Refer to the contact information provided with your purchase documentation or visit the official Galnolt website for assistance.