Introduction
Thank you for choosing the VASAGLE ULJB150C101S Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
These bar stools feature a height-adjustable design, 360-degree swivel function, and a comfortable quilted PU leather surface with a supportive backrest and footrest. They are designed for use in dining rooms, kitchens, and counter areas.
Safety Information
- Ensure all parts are present and undamaged before assembly.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 331 lbs (150 kg).
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Periodically check all connections and tighten screws as necessary to ensure stability.
Package Contents
The package includes the following items:
- 2 x Bar Stool Seats
- 2 x Gas Lifts
- 2 x Bases
- 2 x Footrests
- 2 x Accessory Kits (screws, washers, Allen key)
- 1 x Instruction Manual
Setup and Assembly
Assembly is quick and simple, typically taking minutes per stool. Follow the steps below:
- Step 1: Attach the Backrest to the Seat.
Align the backrest support with the pre-drilled holes on the underside of the seat. Secure with the provided screws. - Step 2: Insert the Gas Lift into the Base.
Place the large circular base on a flat surface. Insert the gas lift cylinder into the central hole of the base. - Step 3: Attach the Footrest to the Gas Lift.
Slide the footrest ring over the gas lift cylinder, ensuring it rests securely on the designated groove or support. - Step 4: Connect the Seat to the Gas Lift.
Carefully place the assembled seat (from Step 1) onto the top of the gas lift cylinder. Press down firmly until it is securely seated.
Image: Assembly Step 1 - Attaching the backrest to the seat.
Image: Assembly Step 2 - Inserting the gas lift into the base.
Image: Assembly Step 3 - Attaching the footrest to the gas lift.
Image: Assembly Step 4 - Connecting the seat to the gas lift.
Operating Instructions
Height Adjustment
To adjust the seat height, locate the lever under the seat on the right side. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up slightly to relieve weight from the seat, then pull the lever upwards. The gas lift mechanism allows for smooth height adjustments between 24.8 inches and 33.5 inches.
Image: Height adjustment and 360-degree swivel in use.
Video: Demonstration of the adjustable height feature of the VASAGLE bar stools.
360-Degree Swivel
The seat is designed to rotate 360 degrees, providing flexibility and ease of movement. Simply turn the seat in the desired direction.
Footrest
The integrated footrest provides comfortable support for your feet, promoting a relaxed posture during use.
Image: Close-up of the durable metal lever for height adjustment and the anti-slip base ring.
Video: Overview of the VASAGLE adjustable barstools, highlighting their design and solid construction.
Maintenance and Care
To ensure the longevity and appearance of your bar stools, follow these maintenance guidelines:
- Cleaning: The PU leather surface is easy to clean. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and wipe dry with a clean cloth. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they are tight. Re-tighten if necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack.
- Weight Capacity: Do not exceed the maximum weight capacity of 331 lbs (150 kg) to prevent damage.
Image: Easy to wipe clean PU leather surface.
Video: Features of the bar stool including quilted PU, curved profile, and steel base.
Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions:
- Stool feels wobbly: Ensure all screws and bolts are securely tightened. Check that the base is on a flat, even surface.
- Height adjustment not working: Verify that the gas lift lever is fully engaged. If the issue persists, ensure no obstructions are preventing the gas lift from functioning.
- Seat is lopsided: Recheck the assembly of the seat to the backrest and the connection to the gas lift. Ensure all components are aligned correctly and tightened evenly.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ULJB150C101S |
| Product Dimensions | 19.3"D x 18.9"W x 44.1"H (49cm D x 48cm W x 112cm H) |
| Adjustable Height Range | 24.8" to 33.5" (63cm to 85cm) |
| Color | Forest Green |
| Frame Material | Plywood, Steel, PU (Polyurethane) Leather, Foam |
| Seat Material Type | Polyurethane |
| Maximum Weight Capacity | 331 lbs (150 kg) |
| Item Weight | 39 Pounds (per set of 2) |
| Number of Pieces | 2 |
Image: Detailed product dimensions and maximum static weight capacity.
Image: Bar stool height adjusted for different counter and table heights.
Warranty Information
VASAGLE products typically come with a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the warranty card included in your package or contact VASAGLE customer support directly.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact VASAGLE customer support. Contact information can typically be found on the packaging, the included instruction manual, or the official VASAGLE website.
For online support, visit the VASAGLE Store on Amazon.
