YISSVIC Electric Fly Swatter (Model WD-9002) Instruction Manual

1. Introduction

This manual provides instructions for the safe and effective use of your YISSVIC Electric Fly Swatter. Please read this manual thoroughly before first use and retain it for future reference.

The YISSVIC Electric Fly Swatter is a versatile 2-in-1 device designed to eliminate flying insects such as mosquitoes, flies, gnats, and moths. It features a foldable design for portability, a rechargeable 1800mAh battery, and a purple attractant light for enhanced effectiveness in auto mode.

2. Safety Instructions

• High Voltage: The internal grid operates at 4000V. Do not touch the internal metal grid with bare hands or metal objects when the device is active.
• Children and Pets: Keep the device out of reach of children and pets.
• Water Exposure: Do not expose the device to water or use it in wet conditions. Clean only with a dry cloth.
• Flammable Materials: Do not use near flammable liquids or gases.
• Charging: Use only the provided charging cable. Do not overcharge. If the battery is low, charge promptly.
• Disassembly: Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Intended Use: This device is intended for eliminating flying insects only. Do not use for any other purpose.

Image: A diagram illustrating the three-layer safety protection mesh of the electric fly swatter, showing the outer protective nets and the inner high-voltage grid.

3. Package Contents

• YISSVIC Electric Fly Swatter (Model WD-9002)
• USB-C Charging Cable
• Instruction Manual

4. Product Features

• 2-in-1 Functionality: Handheld swatter and standing bug zapper with attractant light.
• Foldable Design: 180° foldable for easy storage and portability.
• Rechargeable Battery: Built-in 1800mAh non-removable battery with 4-level indicator.
• High Voltage Grid: 4000V output for effective insect elimination.
• Purple Attractant Light: Enhances effectiveness in auto mode, especially in low-light conditions.
• Three-Layer Safety Mesh: Double-sided protective mesh prevents accidental contact with the high-voltage grid.

5. Setup

1. Initial Charge: Before first use, fully charge the device for approximately 4 hours. Ensure the device is turned OFF during charging.
2. Unfolding: The swatter can be used in its extended form or folded to 90 degrees to stand on a flat surface. For storage, fold it completely to 180 degrees.

Image: The YISSVIC Electric Fly Swatter in its folded and unfolded states, demonstrating its portability and dual functionality.

6. Operating Instructions

6.1. Mode Selection

The device features a slide switch on the handle to select between Off, Manual Mode, and Auto Mode.

Image: Close-up of the swatter handle showing the mode switch (Off, Manual, Auto) and battery indicator lights.

6.2. Manual Mode

1. Slide the switch to the middle position (Manual Mode).
2. Press and hold the zap button on the handle. A red working indicator light will illuminate.
3. While holding the button, wave the racket towards flying insects to make contact with the electric grid. A "zap" sound indicates successful elimination.
4. Release the button when finished. The red indicator light will turn off.

Image: Visual guide demonstrating how to activate and use the swatter in manual mode.

6.3. Auto Mode (Standing Zapper)

1. Fold the swatter to 90 degrees so it can stand upright on a flat surface.
2. Slide the switch to the top position (Auto Mode). The purple attractant light will turn on, and the electric grid will be continuously active.
3. Place the device in an area where insects are present. The purple light will attract insects to the grid for elimination.
4. For optimal performance in Auto Mode, use in a weak light environment, such as at night. Shading measures are required during daytime use.
5. When using Auto Mode for extended periods, it is recommended to keep the swatter plugged in to prevent battery depletion.

Image: The swatter standing upright in Auto Mode, emitting a purple light to attract insects.

7. Charging Instructions

• Connect the provided USB-C charging cable to the charging port on the handle and to a USB power source (adapter not included).
• The 4-level battery indicator lights on the handle will show the charging status. Each light represents approximately 25% battery capacity.
• When only one green light is on, charge the device promptly to maintain optimal performance.
• A full charge typically takes 4 hours.

Image: The swatter hanging on a wall, showing the 4-level battery indicator lights and a charging cable connected.

8. Maintenance

• Cleaning: Ensure the device is OFF and unplugged before cleaning. Use a dry brush or cloth to gently remove insect debris from the grid. Do not use water or cleaning solutions.
• Storage: Store the swatter in a cool, dry place, away from direct sunlight and moisture. The foldable design allows for compact storage.

9. Troubleshooting

10. Specifications

• Model Number: WD-9002
• Brand: YISSVIC
• Power Source: Battery Powered (1800mAh rechargeable)
• Voltage: 4000V (output)
• Material: Polypropylene (PP)
• Product Dimensions: 10.7"L x 8.54"W x 19.96"H (unfolded)
• Item Weight: 9.44 ounces
• Target Species: Flies, Mosquitoes, Gnats, Moths, Bugs, Fruit Flies
• Recommended Uses: Indoor Home, Backyard, Patio, Camping

11. Warranty and Support

YISSVIC products are designed for quality and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official YISSVIC website.

If you encounter any issues not covered in this manual, please contact YISSVIC customer service for assistance.

12. Product Videos