TARSHYRY B0GW9GWHDJ

Download PDF
Contents

TARSHYRY Salt Generator Instruction Manual

Model: B0GW9GWHDJ

1. Product Overview

The TARSHYRY Salt Generator is a smart control saltwater chlorinator designed for efficient and automated sanitation of pools, hot tubs, and spas up to 45m³. This compact unit integrates the controller and chlorine generator, offering ease of installation and operation.

Key features include:

  • Compact Design: Streamlined unit combining controller and generator for simple installation.
  • Power Outage Memory: Retains settings and resumes operation after power restoration.
  • Removable Ti Plates: Facilitates easy maintenance and cleaning of the electrode plates.
  • Adjustable Chlorine Output: Customizable chlorine production (25%, 50%, 75%, 100%) to suit varying pool conditions.
  • Smart Control: One-key operation for starting and stopping the system, with self-cleaning electrodes.
TARSHYRY Salt Generator front view

Image 1.1: Front view of the TARSHYRY Salt Generator, showing the control panel and connections.

2. Safety Information

Please read and understand all safety instructions before installing, operating, or maintaining this product. Failure to follow these instructions could result in serious injury or property damage.

  • Electrical Safety: Always disconnect power before performing any service or maintenance. Ensure the unit is connected to a properly grounded outlet. Do not operate if the power cord is damaged.
  • Chemical Handling: Saltwater chlorinators produce chlorine. Always follow local regulations for pool chemical handling and storage. Avoid direct contact with chlorine.
  • Installation: Installation must be performed by a qualified professional or in accordance with all local electrical and plumbing codes.
  • Water Quality: Maintain proper water chemistry as recommended by pool professionals. Incorrect water balance can damage the unit and reduce its effectiveness.
  • Children and Pets: Keep the unit and all pool chemicals out of reach of children and pets.

3. Package Contents

Verify that all items are present in the package before proceeding with installation:

  • 1 x Saltwater Chlorinator Unit
  • 2 x Pipe Connection Accessories
  • 1 x Power Supply Adapter
  • 1 x Instruction Manual (this document)

4. Product Specifications

SpecificationValue
Item TypeSaltwater Chlorinator
MaterialTi Plate, Plastic
Frequency50-60Hz
Pipe Connection50mm / 1.97in, 48mm / 1.89in (1.5in)
Chlorine Output Adjustment25%, 50%, 75%, Full
Self Polarity Reversal (Self-Clean)1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h
Maximum Working Pressure≤0.3MPa
Wireless Signal2.4G
Recommended Salt Concentration1-3.5g/l (1000-3500 ppm)
Power60W
Chlorine Output10g/h
Suitable Pool CapacityUp to 45m³
Waterproof RatingIPX4
Product Size (L x W x H)Approx. 215x145x140mm / 8.46x5.71x5.51in
Bottom Mounting Hole Spacing125mm / 4.92in
TARSHYRY Salt Generator dimensions

Image 4.1: Product dimensions for installation planning.

5. Installation and Setup

Proper installation is crucial for the safe and efficient operation of your salt generator. Refer to the diagram below for typical installation.

  1. Pre-Installation Check: Before starting, ensure the pipe diameter in your pool system matches the chlorinator's connection diameters (50mm/1.97in, 48mm/1.89in, or 1.5in).
  2. Shut Off Water: Close the valves at both ends of the pipeline where the chlorinator will be installed to prevent water flow.
  3. Mounting: Securely mount the chlorinator unit in a suitable location, ensuring the bottom mounting hole spacing (125mm / 4.92in) is accommodated. The unit should be installed after the filter and heater, and before any return jets.
  4. Pipe Connection: Connect the chlorinator to the pool plumbing using the provided accessories. Ensure all connections are watertight. The unit has an arrow indicating water flow direction; ensure it aligns with your pool's circulation.
  5. Electrical Connection: Connect the power supply adapter to the chlorinator and then plug it into a properly grounded electrical outlet. Ensure the power supply is off during connection.
  6. Add Salt to Pool: If your pool does not already have salt, add pool-grade salt to achieve the recommended concentration of 1000-3500 ppm (1-3.5g/l). Allow the salt to dissolve completely before starting the chlorinator.
  7. Initial System Check: Once installed and salt is dissolved, open the pipeline valves and check for leaks. Restore power to the unit.
Close-up of pipe connection on TARSHYRY Salt Generator

Image 5.1: Detail of the pipe connection point on the chlorinator.

Mounting base of TARSHYRY Salt Generator

Image 5.2: View of the mounting base, showing screw holes for secure installation.

6. Operating Instructions

The TARSHYRY Salt Generator features smart control for easy operation.

TARSHYRY Salt Generator control panel with Smart Control text

Image 6.1: Control panel highlighting smart control features.

  1. Power On/Off: Press the ON/OFF button to start or stop the chlorinator. The unit will display its operating status.
  2. Adjust Chlorine Output: Use the Chlorine Output button to cycle through the available chlorine production levels: 25%, 50%, 75%, and Full (100%). Select the output level appropriate for your pool size and usage.
  3. Set Operation Hours: The Operation Hours button allows you to set the desired duration for chlorine generation. Refer to your pool's specific needs and water testing results to determine optimal operating hours.
  4. Self-Cleaning Function: The unit features a self-polarity reversal function (Self-Clean) to minimize scale buildup on the electrodes. This can be set for intervals of 1h, 2h, 3h, 4h, 5h, 6h, 7h, or 8h. Regular self-cleaning extends the life of the Ti plates.
  5. Low Salt Indicator: The LOW SALT indicator light will illuminate if the salt concentration in your pool water falls below the recommended level. Add pool-grade salt as needed.
  6. Power Outage Memory: In the event of a power interruption, the unit will automatically resume its last operational mode once power is restored. No manual resetting is required.
TARSHYRY Salt Generator with Power Off Memory feature

Image 6.2: The chlorinator unit, illustrating the power off memory function.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your TARSHYRY Salt Generator.

  1. Electrode Cleaning (Removable Ti Plates): The unit's removable Ti plates simplify cleaning. Periodically inspect the plates for scale buildup. If scale is present, remove the plates and clean them using a mild acid solution (e.g., diluted muriatic acid) or a specialized cell cleaning solution. Always follow safety precautions when handling acids. Rinse thoroughly with fresh water before reinstallation.
  2. Water Chemistry: Regularly test your pool water for pH, alkalinity, calcium hardness, and salt levels. Maintain these parameters within recommended ranges for efficient chlorination and to prevent damage to the unit.
  3. Winterization: In colder climates, the salt generator must be removed from the plumbing and stored indoors during winter months to prevent freezing damage.
  4. General Cleaning: Keep the exterior of the unit clean and free from debris. Do not spray water directly onto the control panel.
Top-down view of TARSHYRY Salt Generator, showing removable cell access

Image 7.1: Top-down view, indicating access for electrode maintenance.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

ProblemPossible CauseSolution
Unit not powering onNo power supply; faulty adapter; unit malfunction.Check power connection and outlet. Ensure adapter is functioning. If problem persists, contact support.
"LOW SALT" indicator onInsufficient salt level in pool; sensor issue.Test pool salt level and add pool-grade salt if necessary. Allow time for dissolution. If salt level is correct, clean electrodes or contact support.
Low chlorine outputLow salt level; dirty electrodes; incorrect output setting; low water flow.Check salt level. Clean electrode plates. Increase chlorine output setting. Ensure pump is running and water flow is adequate.
Excessive chlorineOutput setting too high; unit running too long.Reduce chlorine output setting. Decrease operation hours.
Unit not self-cleaningSelf-clean interval not set; internal fault.Verify self-clean interval is set. If issue continues, contact support.

9. Warranty and Support

TARSHYRY products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period.

For technical support, troubleshooting assistance, or warranty claims, please contact TARSHYRY customer service. Have your product model number (B0GW9GWHDJ) and purchase date ready when contacting support.

Customer Support:

  • Contact information (e.g., email, phone number, website) would typically be provided here by the manufacturer.

© 2023 TARSHYRY. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.