Introduction
Thank you for choosing the brenzo Wearable Foot & Ankle Massager. This device is designed to provide targeted heat and vibration therapy to your feet and ankles, offering relaxation and comfort. Please read this manual thoroughly before use to ensure proper operation and to maximize your experience.
Important Safety Information
- Always consult your physician before using this massager if you have any pre-existing medical conditions, are pregnant, or have a pacemaker.
- Do not use the massager on swollen, inflamed, or injured areas.
- Keep the device away from water and high humidity.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Ensure the charging cable is not damaged and is used with a compatible power source.
- Keep out of reach of children.
- Discontinue use immediately if you experience any discomfort or pain.
Package Contents
- 1 x brenzo Wearable Foot & Ankle Massager
- 1 x USB Charging Cable
- 1 x User Manual
Product Features
- Multi-Level Vibration Massage: Offers customizable gentle to firm vibration settings for relaxation and comfort.
- Ergonomic Foot-Friendly Design: Contoured shape targets key areas of the foot for consistent relaxation.
- Portable & Compact: Lightweight and easy to carry for use at home, office, or while traveling.
- Premium Soft & Durable Material: Made with skin-friendly, breathable surface for comfort and longevity.
- User-Friendly One-Hand Operation: Simple control buttons for effortless intensity adjustment and low-noise operation.
- Heat Therapy: Integrated heating element for soothing warmth.
Image: The brenzo massager features an advanced triple therapy system combining heat and gentle rhythmic vibration for comprehensive relief.
Setup
1. Charging the Device
Before first use, fully charge the massager. Connect the USB charging cable to the charging port on the device and plug the other end into a compatible USB power adapter (not included). A full charge takes approximately 30 minutes. The LED display will indicate charging status.
Image: The massager is cordless and rechargeable, featuring a charging port and a battery indicator showing approximately 2 hours of use on a full charge.
2. Wearing the Massager
- Place the massager on your foot or ankle, ensuring the control panel is positioned comfortably for access.
- Wrap the strap around your foot or ankle and secure it with the Velcro closure. Adjust for a snug, comfortable fit that is not too tight.
Image: Step-by-step guide showing how to place the massager on the foot or ankle, secure with the Velcro strap, and power on the device.
Operating Instructions
1. Power On/Off
- To turn on: Press and hold the power button (⏻) for a few seconds until the LED display illuminates.
- To turn off: Press and hold the power button (⏻) again until the display turns off.
2. Adjusting Vibration Levels
- Press the vibration button (∿) to cycle through the 5 available vibration levels.
- The LED display will show the current vibration level (e.g., '1' for lowest, '5' for highest).
3. Adjusting Heat Levels
- Press the heat button (♨) to cycle through the 5 available heat levels.
- The LED display will show the current heat level (e.g., '1' for lowest, '5' for highest).
Image: The control panel displays current settings and allows adjustment of 5 vibration levels and 5 heat levels for personalized therapy.
Maintenance
Cleaning
- Ensure the device is turned off and unplugged before cleaning.
- Wipe the surface of the massager with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Allow the device to air dry completely before storing or recharging.
Storage
- Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully (approx. 30 minutes). |
| No vibration or weak vibration. | Vibration level is set too low or battery is low. | Increase vibration level using the control buttons. Recharge the device. |
| No heat or insufficient heat. | Heat level is set too low or battery is low. | Increase heat level using the control buttons. Recharge the device. |
| Device feels uncomfortable. | Massager is too tight or settings are too high. | Adjust the strap for a looser fit. Reduce vibration or heat intensity. |
Specifications
- Model: foot-001
- Product Dimensions: 7.2 x 5.3 x 2.2 inches
- Weight: 6.74 ounces
- Battery: 1 A battery (included)
- Charging Time: Approximately 30 minutes
- Massage Technique: Vibration
- Special Features: Heat Therapy
- Material: Neoprene
Warranty Information
brenzo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
Customer Support
For any questions, concerns, or assistance with your brenzo Wearable Foot & Ankle Massager, please contact our customer support team. Refer to the product packaging or our official website for the most current contact information.