1. Introduction
Thank you for choosing the VASAGLE Wooden Dining Chairs. This manual provides essential information for the safe assembly, operation, and maintenance of your new chairs. Please read these instructions thoroughly before assembly and retain them for future reference.
Image: VASAGLE Wooden Dining Chairs Set of 4, Sage Green.
These chairs feature a mid-century modern design with upholstered seats and solid wood legs, offering both style and comfort for your dining area, kitchen, or vanity. Each chair is designed with an ergonomic curved backrest and a built-in handle for ease of movement.
2. Safety Information
Please adhere to the following safety guidelines to prevent injury or damage to the product:
- Always ensure the chair is fully assembled and all fasteners are securely tightened before use.
- Do not exceed the maximum weight capacity of 330 lb (150 kg) per chair.
- Be cautious when moving the chair to prevent tipping or accidental falls.
- Follow the assembly instructions carefully to ensure safe and proper use.
- Keep small parts and packaging materials away from children to avoid choking hazards.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 4 x Dining Chair (unassembled)
- 2 x Assembly Kit (hardware and tools)
- 2 x Instructions Manual
4. Assembly Instructions
Assembly is required for these dining chairs. Please follow the steps below carefully. It is recommended to assemble the chairs on a soft, clean surface to prevent scratches.
- Step 1: Attach Legs to Seat Frame. Position the seat frame upside down. Align the pre-drilled holes on the chair legs with the corresponding holes on the seat frame. Insert the screws provided in the assembly kit.
- Step 2: Secure Backrest. Insert the backrest into the designated slots on the seat frame. Ensure it is properly seated.
- Step 3: Tighten Screws. Using the provided tool, partially tighten all screws. Once all components are in place and aligned, fully tighten all screws to ensure stability. Do not fully tighten screws until all parts are loosely assembled.
- Step 4: Final Check. Turn the chair upright and gently test its stability. Ensure there is no wobbling and all connections are secure.
Video: Assembly guide for VASAGLE dining chairs, demonstrating quick setup.
Video: Visual instructions for building and placing the chairs.
Image: Detailed assembly diagram for the dining chair.
5. Operating Instructions
These dining chairs are designed for comfortable seating in various indoor settings.
- Seating: Sit centrally on the chair, ensuring even weight distribution. The ergonomic curved backrest provides support for extended periods.
- Movement: Utilize the built-in handle on the backrest for easy repositioning of the chair. This feature allows for smooth, one-handed mobility without straining.
Image: Built-in handle for easy chair movement.
Video: Demonstration of using the built-in handle and general chair use.
Video: Highlighting the ergonomic design for comfort.
6. Care and Maintenance
Proper care will extend the life and appearance of your chairs.
- Cleaning Fabric: For general cleaning, gently vacuum the upholstered areas. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Cleaning Wood: Wipe wooden parts with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Dry immediately with a clean cloth.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric and wood finish.
- Check Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Protect Floors: Consider using felt pads on the bottom of the chair legs to protect your flooring from scratches.
7. Troubleshooting
If you encounter any issues with your chairs, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly | Screws are not fully tightened or unevenly tightened. | Loosen all screws slightly, sit on the chair to settle the components, then re-tighten all screws evenly and firmly. |
| Difficulty moving the chair | Obstruction on the floor or chair legs catching. | Ensure the floor is clear. Use the built-in handle for easier lifting and repositioning. Check for any debris under the legs. |
| Fabric appears stained or dirty | Accumulated dirt or spills. | Refer to the 'Care and Maintenance' section for appropriate cleaning methods for linen-look fabric. |
If the problem persists, please contact customer support for further assistance.
8. Specifications
Key product specifications for the VASAGLE Wooden Dining Chairs:
- Model Number: UKDC668C101-2J
- Color: Sage Green
- Material: Rubberwood, Plywood, Steel, Linen-Look Fabric, Foam, Non-Woven Fabric
- Product Dimensions (D x W x H): 20" x 19.6" x 32.2" (50 cm x 49.8 cm x 81.8 cm)
- Seat Height: 19.6" (50 cm)
- Backrest Height: 9.4" (24 cm)
- Item Weight: Approximately 13.7 lbs (6.2 kg) per chair
- Maximum Weight Capacity: 330 lbs (150 kg) per chair
- Room Type: Dining Room, Kitchen
- Style: Mid-Century Modern
Image: Detailed dimensions of the dining chair.
9. Warranty and Support
VASAGLE products are designed for quality and durability. For information regarding warranty coverage, please refer to the documentation included with your purchase or visit the official VASAGLE website.
If you require assistance with assembly, have questions about product features, or need to report a missing/damaged part, please contact VASAGLE customer support. Have your model number (UKDC668C101-2J) and purchase details ready for faster service.
Contact Information: Please refer to your purchase receipt or the VASAGLE official website for the most current customer support contact details.