Ingenuity 3D Travelmate Pro Lightweight Travel Stroller Instruction Manual

Important Safety Information

Read all instructions carefully before assembly and use of the stroller. Keep this manual for future reference. Failure to follow these instructions could result in serious injury or death to your child.

• Always secure your child with the harness system.
• Never leave your child unattended in the stroller.
• Do not overload the storage basket or hang items on the handle, as this may cause the stroller to become unstable.
• Ensure the stroller is fully open and locked before placing a child inside.
• The maximum weight recommendation for the main seat is 50 pounds (22.7 kg).
• The FoldAway Ride-On Board is designed for a second child. Ensure the child on the board is supervised.

Product Components

The Ingenuity 3D Travelmate Pro Stroller includes the following components:

• Stroller Frame with Main Seat
• FoldAway Ride-On Board
• Carry Bag
• Cup Holder
• Canopy
• Storage Basket

Figure 1: Stroller Features Overview. This image highlights key components and features of the stroller, including the one-handed fold, cup holder, canopy, reclining seat, FoldAway Ride-On Board, and storage basket. It also indicates car seat compatibility.

Setup and Assembly

Unfolding the Stroller

1. Place the folded stroller on a flat surface.
2. Release the folding latch (if present).
3. Lift the handle upwards until the frame clicks into place, indicating it is fully open and locked. Ensure all locking mechanisms are engaged before use.

Attaching Wheels and Accessories

• Attach the wheels by pushing them onto the axles until they click securely.
• Slide the cup holder onto the designated attachment point on the handle.
• Ensure the storage basket is properly secured to the frame.

FoldAway Ride-On Board Installation

The 2-in-1 FoldAway Ride-On Board can be attached to the rear of the stroller. It allows a second child to sit or stand. The board can be folded up and clipped into place when not in use, or removed entirely.

Figure 2: FoldAway Ride-On Board in use. This image demonstrates the 2-in-1 FoldAway Ride-On Board, showing a child standing on it and an inset illustrating its standing mode and how it can be folded into the stroller's basket for storage.

Car Seat Compatibility

The stroller is compatible with select infant car seats (sold separately) to create a travel system. Refer to your car seat manual for specific attachment instructions. Compatible car seat brands include Graco SnugRide SnugFit™, Graco SnugRide SnugLock®, Graco SnugRide® Lite, Evenflo Litemax, Chicco Keyfit, and Safety 1st® onBoard®.

Operating the Stroller

Figure 3: Four Ways to Roll. This image illustrates the versatility of the stroller, showing its use for strolling with one child, and accommodating a second child in sitting or standing positions on the ride-on board, as well as its compact storage capability.

Harness System

Always secure your child using the 5-point safety harness. Adjust the straps to ensure a snug fit without being too tight.

Seat Recline and Calf Support

• The main seat offers multiple recline positions. Locate the recline adjustment mechanism behind the seat and adjust to your desired angle.
• The calf support is adjustable for your child's comfort.

Canopy Adjustment

The full-coverage canopy provides shade. Extend or retract the canopy as needed. A peek-a-boo window allows you to check on your child.

Storage and Accessories

• The large under-seat storage basket can hold essential items. Do not exceed the maximum weight limit for the basket.
• The cup holder is designed for beverages. Be aware that it may detach during folding or vigorous movement.

Folding the Stroller

The stroller features a one-hand, self-standing fold for convenience.

1. Ensure the seat is in an upright position and the canopy is retracted.
2. Locate the one-hand fold mechanism (typically on the handle).
3. Activate the mechanism and push downwards to fold the stroller into a compact, self-standing position.

Figure 4: One-Hand Fold Operation. This image illustrates the simple one-hand folding process of the stroller, resulting in a compact, self-standing unit.

Travel and Portability

The compact folded size and included carry bag make this stroller suitable for travel. It is designed to be overhead bin compatible, but always check with your specific airline for their carry-on requirements.

Figure 5: Overhead Bin Compatibility. This image demonstrates the stroller's compact folded size, fitting into an airplane overhead bin, and highlights the included storage bag for travel convenience.

Maintenance

Cleaning Instructions

The stroller features easy-clean fabrics. For routine cleaning:

• Wipe down the fabric components with a damp cloth and mild soap.
• Allow to air dry completely before folding or storing.
• Do not use harsh abrasives or solvents.
• The seat pad is made of 100% Polyurethane Foam Pad. Protective covers are 100% Resin-Treated Polyester Fiber Batting. The bumper bar cover is 100% Molded Rubber.

General Care

• Regularly check all parts for wear and tear, especially wheels, brakes, and harness components.
• Lubricate moving parts if necessary with a silicone-based lubricant.
• Store the stroller in a dry place away from direct sunlight when not in use.

Troubleshooting

Stroller Does Not Fold/Unfold Smoothly

• Ensure all components are clear of obstructions.
• Check that the seat is in the upright position and the canopy is retracted.
• Apply light pressure to the folding mechanism. If resistance persists, do not force it.

Cup Holder Detaches Easily

• The cup holder is designed for easy attachment and removal. It may detach during folding or if bumped. Reattach firmly.
• Consider removing the cup holder before folding the stroller for storage.

Stroller Feels Heavy for a "Lightweight" Model

• While designed to be lightweight for its features, the stroller's robust construction and additional components (like the ride-on board) contribute to its overall weight of approximately 24 pounds.
• Its compact fold is a key feature for portability, rather than extreme lightness.

Specifications

Figure 6: Stroller Dimensions. This image provides a visual representation of the stroller's assembled dimensions in both inches and centimeters, indicating its design for comfort and compact size.

Warranty Information

The Ingenuity 3D Travelmate Pro Stroller comes with a 90-day Limited Warranty from the manufacturer, Kids2, LLC. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the documentation included with your product or contact customer support.

Customer Support

For assistance with assembly, operation, troubleshooting, or warranty claims, please contact Ingenuity customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.

Manufacturer: Kids2, LLC