1. Introduction
Thank you for choosing the Trophy Ridge SWFT Duo Picatinny Mount Bow Sight. This manual provides essential information for the proper setup, operation, and maintenance of your new bow sight. Designed for precision and durability, the SWFT Duo features a robust Picatinny mount, tool-free micro-click adjustments, and adaptable illumination to enhance your shooting experience. Please read this manual thoroughly before using your bow sight to ensure safe and optimal performance.
Figure 1: Front view of the SWFT Duo Picatinny Mount Bow Sight. This image shows the overall design, including the sight housing, dual-pin configuration, and the Picatinny mounting system.
2. Components Overview
Familiarize yourself with the main components of your SWFT Duo bow sight:
- Sight Housing: The main body that encloses the sight pins and fiber optics.
- Sight Pins: Dual-pin system for aiming at various distances.
- Picatinny Mount: The integrated base for secure attachment to your bow's Picatinny rail.
- Windage Adjustment Knob: Located on the side, used for horizontal micro-adjustments.
- Elevation Adjustment Knob: Located on the top or bottom, used for vertical micro-adjustments.
- Click Light: An integrated light source to illuminate the sight pins in low-light conditions.
- Fiber Optic: Gathers ambient light to brighten the pins, enhancing visibility.
3. Setup and Installation
- Attach the Sight: Align the SWFT Duo's Picatinny mount with the Picatinny rail on your bow. Secure it firmly using the provided screws. Ensure the sight is level and does not obstruct other bow accessories.
- Initial Pin Adjustment: Loosen the locking screws for the sight pins. Adjust the pins to your desired starting positions, typically with the top pin set for 20 yards and the bottom pin for 30 or 40 yards. Tighten the locking screws once positioned.
- Click Light Check: Ensure the click light is securely in place and functioning. If not, refer to the maintenance section for battery installation or replacement.
4. Operating Instructions
4.1 Sighting In Your Bow
Sighting in is crucial for accuracy. Perform this process in a safe environment, following all archery safety guidelines.
- 20-Yard Pin: Set up a target at 20 yards. Shoot a group of arrows.
- Adjust Windage: If your arrows are consistently left or right of the target, use the windage adjustment knob to move the sight housing. Move the sight in the direction you want the arrow to go (e.g., if arrows hit left, move sight left). Each click provides a micro-adjustment.
- Adjust Elevation: If your arrows are consistently high or low, use the elevation adjustment knob. Move the sight up to move the impact point up, and down to move it down.
- Repeat and Refine: Continue shooting and adjusting until your 20-yard pin is accurate.
- Other Pins: Once the 20-yard pin is set, move to longer distances (e.g., 30, 40, 50 yards) and adjust the other pins accordingly. The SWFT Duo offers 20 to 100-yard accuracy.
4.2 Using the Click Light
The adaptable click light provides illumination for your sight pins in low-light conditions.
- Activation: Rotate the click light knob to turn it on and adjust its brightness.
- Battery Replacement: Refer to the maintenance section for battery replacement instructions.
5. Maintenance
- Cleaning: Periodically clean the sight housing and pins with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or fiber optics.
- Inspection: Regularly inspect all screws and mounting hardware to ensure they are tight. Check the fiber optics for any damage or fraying.
- Battery Replacement (Click Light): To replace the battery in the click light, carefully unscrew the cap, remove the old battery, and insert a new one (typically CR2032, consult your product packaging for exact type) with the positive (+) side facing up. Replace the cap securely.
- Storage: Store your bow and sight in a cool, dry place, protected from extreme temperatures and direct sunlight, to prevent material degradation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Arrows consistently off target. | Sight not properly sighted in; loose mounting screws. | Re-sight in your bow (Section 4.1). Check and tighten all mounting screws. |
| Sight pins appear dim. | Insufficient ambient light; click light battery low or off; damaged fiber optic. | Activate or adjust click light. Replace click light battery (Section 5). Inspect fiber optic for damage and contact support if necessary. |
| Sight feels loose on the bow. | Mounting screws are loose. | Tighten all Picatinny mount screws securely. Do not overtighten. |
7. Specifications
- Model: SWFT Duo Picatinny Mount Bow Sight
- Mount Type: Picatinny
- Pin Configuration: Dual-pin
- Adjustment: Tool-free micro-click windage and elevation
- Accuracy Range: 20 to 100 yards
- Construction Material: Magnesium and Aluminum
- Illumination: Adaptable click light
8. Warranty Information
Trophy Ridge products are manufactured to high standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms, conditions, and registration, please refer to the official Trophy Ridge website or contact customer support. Keep your proof of purchase for warranty claims.
9. Customer Support
Should you have any questions, require technical assistance, or need to report an issue with your SWFT Duo Picatinny Mount Bow Sight, please contact Trophy Ridge customer support.
- Website: www.trophyridge.com/support (Example link, actual link may vary)
- Email: support@trophyridge.com (Example email, actual email may vary)
- Phone: 1-800-XXX-XXXX (Example number, actual number may vary)
When contacting support, please have your product model number (SWFT Duo Picatinny Mount Bow Sight) and purchase date available.