FLEXIMOUNTS 2 Pack 2x6ft Folding Garage Wall Shelves Instruction Manual

Introduction

Thank you for choosing the FLEXIMOUNTS 2 Pack 2x6ft Folding Garage Wall Shelves. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new storage system. Please read this manual thoroughly before assembly and retain it for future reference.

Safety Information

• Always read and understand all instructions before beginning installation. Improper installation can lead to injury or property damage.
• Ensure the mounting surface is structurally sound and capable of supporting the combined weight of the shelves and their contents.
• Do not exceed the maximum weight capacity of 900 lbs per shelf or 1800 lbs total for the two-pack.
• Wear appropriate safety gear, including eye protection, during installation.
• Keep children and pets away from the work area during installation.
• Regularly inspect the shelves for any signs of wear, damage, or loose fasteners. Tighten as necessary.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact FLEXIMOUNTS customer support.

• 2 x Folding Garage Wall Shelves (2x6ft each)
• All necessary Hardware for installation
• Installation Template
• Level
• Reinforcement Parts

Specifications

This image illustrates the heavy-duty capacity of the FLEXIMOUNTS folding garage wall shelves, highlighting a total load capacity of 1800 lbs across two shelves, with each shelf capable of holding up to 900 lbs. The dimensions of 74.3 inches wide and 24.3 inches deep are also shown.

Setup and Installation

The FLEXIMOUNTS folding garage shelves are designed for straightforward installation. A single person can typically complete the setup. Ensure you have the necessary tools before starting.

Tools You May Need:

• Drill
• Stud Finder (for wood stud installation)
• Measuring Tape
• Pencil
• Socket Wrench or Adjustable Wrench

Installation Steps:

1. Choose Your Location: Select a wall in your garage, basement, workshop, or home office that can accommodate the shelf dimensions (74.3"W x 24.3"D). Ensure there is enough clearance for folding and unfolding.
2. Identify Wall Type and Stud Spacing: Use a stud finder to locate wood studs if installing on a wood stud wall. The shelves are designed for 12", 16", 18", and 24" stud spacing. For solid brick or concrete walls, mark your desired mounting points directly. Note: Not intended for brick veneer, hollow brick, or metal studs.
3. Mark Mounting Points: Use the provided template and level to accurately mark the drilling locations on your wall. Double-check measurements to ensure the shelves will be level and properly spaced.
4. Drill Pilot Holes: Drill pilot holes at the marked locations according to the hardware instructions. The size of the drill bit will depend on your wall type and the anchors/screws provided.
5. Attach Mounting Brackets: Secure the mounting brackets to the wall using the provided hardware. Ensure all fasteners are tightened securely.
6. Assemble Shelf Frame: Follow the assembly instructions for the shelf frame, ensuring all components are correctly aligned and secured. Pay attention to the Anti-Tilt Locking Connector and Forward-Motion Lock mechanisms for proper stability.
7. Mount Shelf to Brackets: Carefully lift the assembled shelf frame and attach it to the wall-mounted brackets. Engage the locking mechanisms to secure the shelf in the extended position.
8. Final Inspection: Once installed, gently test the shelf's stability and ensure all connections are tight. Do not load the shelf until you are confident in its secure installation.

This image illustrates the versatility of the FLEXIMOUNTS shelves, showing their compatibility with common wood stud spacings (12", 16", 18", 24"), solid brick walls, and concrete walls. It also clearly states that the shelves are not intended for brick veneer, hollow brick, or metal walls.

A detailed diagram highlighting the robust construction and stability features of the FLEXIMOUNTS shelf. It points out the 'Anti-Tilt Locking Connector' for secure attachment and the 'Forward-Motion Lock' to prevent accidental movement, ensuring a stable storage solution.

Operating Instructions

The FLEXIMOUNTS folding shelves offer a convenient space-saving design, allowing you to fold them away when not needed.

To Extend the Shelf for Use:

1. Ensure the shelf is securely mounted to the wall.
2. Gently pull the shelf downwards from its folded position until it is fully extended and horizontal.
3. Confirm that the support arms are locked into place and the Forward-Motion Lock is engaged, providing a stable surface.

To Fold the Shelf for Space Saving:

1. Release: Unload all items from the shelf. Locate the release mechanism on the support arms.
2. Remove: Disengage the support arms from their locked position.
3. Folding: Gently lift the shelf upwards, allowing it to pivot and fold flat against the wall.
4. Re-Secure: Ensure the shelf is securely latched or held in its folded position against the wall to prevent accidental deployment.

A visual guide detailing the four steps to operate the folding mechanism of the FLEXIMOUNTS shelf: 'Release' the lock, 'Remove' the support arm, 'Folding' the shelf upwards, and 'Re-Secure' it against the wall.

This image demonstrates the space-saving design of the FLEXIMOUNTS wall shelves. The top part shows the shelf in its extended, 'Storage Ready' position, while the bottom part shows it neatly folded against the wall in a 'Space Ready' configuration, illustrating its versatility.

Maintenance

To ensure the longevity and safe operation of your FLEXIMOUNTS shelves, follow these maintenance guidelines:

• Regular Inspection: Periodically check all mounting hardware and connections for tightness. Over time, vibrations or heavy loads can cause fasteners to loosen.
• Cleanliness: Wipe down the shelves with a damp cloth to remove dust and debris. Avoid abrasive cleaners that could damage the powder-coated finish.
• Lubrication: If the folding mechanism becomes stiff, apply a small amount of silicone-based lubricant to the pivot points.
• Damage Check: Inspect the metal frame for any signs of bending, cracks, or rust. If significant damage is found, discontinue use and contact customer support.

Troubleshooting

If you encounter issues with your FLEXIMOUNTS shelves, refer to the following common problems and solutions:

• Shelf Appears Unstable or Sags:
  • Solution: Immediately unload the shelf. Re-check all mounting hardware to ensure it is securely tightened. Verify that the shelf is installed into appropriate wall studs or solid masonry. Ensure the weight capacity is not exceeded.
• Difficulty Folding/Unfolding:
  • Solution: Ensure the shelf is completely unloaded. Check for any obstructions in the folding mechanism. Apply a small amount of lubricant to the pivot points if necessary.
• Missing or Damaged Parts:
  • Solution: Do not attempt to install or use the product. Contact FLEXIMOUNTS customer support for replacement parts.

Warranty and Support

FLEXIMOUNTS is committed to providing high-quality products. For any questions, concerns, or support needs regarding your 2 Pack 2x6ft Folding Garage Wall Shelves, please contact FLEXIMOUNTS customer service. Please have your model number (2pack-2x6ft) and purchase information ready when contacting support.

For the most current warranty information and contact details, please visit the official FLEXIMOUNTS website or refer to the documentation included with your purchase.