HOOBRO BB04DHJ01

HOOBRO Plant Stand Indoor with Grow Lights - Instruction Manual

Model: BB04DHJ01

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your HOOBRO 7-Tier Indoor Plant Stand with Grow Lights. Please read these instructions carefully before use and retain them for future reference.

Safety Information

  • Ensure all parts are securely fastened before placing plants or other items on the stand.
  • Do not overload the shelves. Refer to the "Specifications" section for weight limits.
  • Keep electrical components (grow lights) away from water.
  • Use the provided anti-tip kit to secure the plant stand to a wall, especially in households with children or pets.
  • Unplug the grow lights from the power source before cleaning or performing any maintenance.
  • This product is intended for indoor use only.

Package Contents

Please verify that all components are present before beginning assembly.

  • Metal Frame Components
  • Engineered Wood Shelves (various sizes)
  • 3-Head Adjustable Grow Light Unit
  • Assembly Hardware (screws, nuts, Allen wrench)
  • Anti-Tip Kit
  • Instruction Manual

Assembly Instructions

Follow these steps to assemble your plant stand. It is recommended to assemble on a soft, clean surface to prevent scratches.

  1. Step 1: Unpack and Identify Parts. Carefully remove all components from the packaging. Lay them out and compare them with the parts list in your manual to ensure everything is present.
  2. Step 2: Assemble the Base Frame. Connect the base metal frame pieces using the provided screws and Allen wrench. Ensure all connections are snug but do not overtighten initially.
  3. Step 3: Attach Vertical Supports. Secure the main vertical metal supports to the base frame.
  4. Step 4: Install Shelves. Attach the engineered wood shelves to the metal frame at the designated positions. The stand features 7 tiers.
  5. Step 5: Secure All Connections. Once all parts are in place, tighten all screws firmly.
  6. Step 6: Install Anti-Tip Kit. For safety, attach the anti-tip kit to the top of the plant stand and secure it to a wall stud according to the kit's instructions.
Diagram showing the dimensions of the HOOBRO plant stand, including height, width, and shelf depths.
Image: Dimensional diagram of the plant stand, illustrating its 7 tiers and overall measurements.
Assembled HOOBRO plant stand with various potted plants, showcasing its multi-tiered design in a living room setting.
Image: Fully assembled plant stand with plants, demonstrating its appearance and capacity.
Close-up of the sturdy heavy-duty metal frame of the plant stand, highlighting its robust construction.
Image: Close-up view of the plant stand's sturdy metal frame, indicating durable support.
Close-up of an anti-slip soft pad on the bottom of the plant stand, designed to protect floors.
Image: Detail of the anti-slip soft pad design on the stand's base, for floor protection.

Operating Instructions: Grow Lights

Your HOOBRO Plant Stand includes a 3-head adjustable grow light system designed to support plant growth.

Connecting the Grow Lights

  • Carefully attach the 3-head grow light unit to the desired locations on the plant stand using the integrated clips or ties.
  • Plug the USB connector of the grow light into a compatible USB power adapter (not included) and then into a wall outlet.

Grow Light Control

The grow light unit features a controller with multiple functions:

  • Power Button: Press to turn the lights ON or OFF.
  • Brightness Adjustment: Use the '+' and '-' buttons to cycle through 9 brightness levels (0% to 100%).
  • Mode Selection: Press the mode button to switch between 5 different lighting modes (e.g., full spectrum, red, blue, red+blue).
  • Timer Function: Set the lights to automatically turn ON/OFF after 3, 9, or 12 hours. Press the timer button to select the desired duration. The lights will then cycle daily.
Close-up of the 3-head plant growth light controller, showing buttons for power, brightness, mode, and timer settings.
Image: Detail of the grow light controller, highlighting its functions for brightness and timer settings.

Maintenance

  • Cleaning: Wipe the engineered wood shelves and metal frame with a soft, damp cloth. Avoid abrasive cleaners.
  • Grow Lights: Gently wipe the grow light heads with a dry cloth to remove dust. Do not use liquid cleaners directly on the lights.
  • Regular Checks: Periodically check all screws and connections to ensure they remain tight.
Close-up of a plant stand shelf with water droplets, illustrating its easy-clean smooth panel surface.
Image: Close-up of a shelf surface, demonstrating its easy-to-clean properties.

Troubleshooting

Grow Lights Not Turning On

  • Ensure the USB power adapter is securely plugged into a working wall outlet.
  • Check the USB connection between the grow light and the adapter.
  • Press the power button on the controller.

Stand Instability

  • Verify that all screws are tightened securely.
  • Ensure the stand is placed on a flat, level surface.
  • Confirm the anti-tip kit is properly installed and secured to the wall.

Grow Light Control Issues

  • If buttons are unresponsive, unplug the grow light for a few minutes and then plug it back in to reset.
  • Ensure the controller is not damaged.

Specifications

FeatureDetail
Model NumberBB04DHJ01
Dimensions (L x W x H)15.7 x 11.8 x 47.2 inches (40 x 30 x 120 cm)
Number of Tiers7
MaterialEngineered Wood, Metal
ColorBlack
Item Weight13.9 pounds (6.3 kg)
Load Capacity (per shelf)Up to 33 pounds (15 kg)
Grow Light Features3-Head, 9 Brightness Levels, 5 Modes, 3/9/12H Timer

Warranty and Support

For warranty information or technical support, please contact HOOBRO customer service through their official website or the retailer where the product was purchased. Please have your model number (BB04DHJ01) and purchase details ready.

© 2026 HOOBRO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.