1. Introduction
The Beatbot Sora 30 is an advanced robotic pool cleaner designed to provide efficient and comprehensive cleaning for various pool types. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
To ensure safe operation and prevent damage to the device or injury, observe the following safety precautions:
- Always disconnect the power supply before performing any maintenance or cleaning.
- Do not operate the cleaner if the power cable or plug is damaged.
- Keep children and pets away from the pool area while the cleaner is in operation.
- Ensure the cleaner is fully submerged before starting operation.
- Do not use the cleaner in water temperatures outside the recommended range (typically 10°C to 35°C).
- Only use original Beatbot accessories and replacement parts.
- Avoid operating the cleaner if there are swimmers in the pool.
3. Package Contents
Verify that all items are present in the package:
- Sora 30 Robotic Pool Cleaner x1
- Charger x1
- Retrieval Hook x1
- User Manual x1
- Quick Start Guide x1
- 150 µm Filter Basket x1
4. Product Overview
The Beatbot Sora 30 is engineered for superior pool cleaning with several key features:
- HydroBalance Suction: Delivers 25700 LPH suction power to capture debris efficiently.
- 3-Zone Cleaning: Cleans the pool floor, walls, and waterline.
- Shallow Water & Platform Cleaning: Utilizes ultrasonic sensors to clean areas with water depth as low as 20 cm, including platforms.
- Smart Surface Parking: Automatically returns to the surface and positions itself at the poolside for easy retrieval.
- Long Battery Life: Equipped with a 10000 mAh battery for up to 5 hours of continuous floor cleaning, covering up to 300 m².
- Large Debris Capacity: Features a 5L debris basket and 150 µm filtration for effective debris collection. An optional 3 µm filter is available for finer particles.
- App Control: Manage cleaning modes, start/stop, and monitor cleaning cycles via the Beatbot app.
- SonicSense Obstacle Avoidance: Dual ultrasonic sensors prevent collisions and getting stuck.
5. Setup
5.1 Initial Charging
Before first use, fully charge the Beatbot Sora 30. Connect the charger to the robot and a power outlet. A full charge typically takes approximately 4.5 hours.
5.2 Placing the Cleaner in the Pool
Gently lower the Beatbot Sora 30 into the pool. Ensure it is fully submerged and air bubbles have escaped before starting operation.
6. Operating Instructions
6.1 Starting a Cleaning Cycle
Once submerged, you can initiate a cleaning cycle using the Beatbot mobile application. The app allows you to select cleaning modes and monitor the robot's progress.
6.2 Smart Surface Parking and Retrieval
Upon completion of a cleaning cycle or when the battery is low, the Sora 30 will automatically return to the surface and position itself at the edge of the pool. It will also release internal water to facilitate easier lifting. To retrieve the robot, simply use the retrieval hook or the one-touch retrieval function in the Beatbot app.
7. Cleaning Modes
The Beatbot Sora 30 offers multiple intelligent cleaning modes to suit your pool's needs:
- Standard Mode: Cleans floor, walls, and waterline.
- Floor Mode: Focuses solely on cleaning the pool floor.
- ECO Mode: Automatic floor cleaning for up to 48 hours.
- Wall Mode: Specifically targets walls and the waterline.
These modes can be selected and customized through the Beatbot app. The robot utilizes optimized S-path cleaning routes for faster cleaning and maximum coverage.
8. Maintenance
8.1 Cleaning the Filter Basket
Regularly clean the filter basket to maintain optimal cleaning performance. The Sora 30 comes with a 150 µm filter for daily debris. An optional 3 µm filter is available separately for ultra-fine particle filtration.
- Remove the robot from the pool.
- Open the filter compartment and remove the filter basket.
- Empty collected debris into a waste bin.
- Rinse the filter basket thoroughly with a hose to remove any remaining dirt and particles.
- Reinsert the clean filter basket into the robot and close the compartment securely.
8.2 General Cleaning
Wipe the exterior of the robot with a soft, damp cloth after each use. Ensure no debris is lodged in the brushes or wheels.
9. Troubleshooting
If you encounter issues with your Beatbot Sora 30, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start | Low battery; Power button not pressed; Not fully submerged. | Charge the robot; Press and hold the power button; Ensure robot is fully underwater. |
| Poor cleaning performance | Clogged filter basket; Worn brushes; Obstruction in suction inlet. | Clean the filter basket; Inspect and replace brushes if necessary; Remove any obstructions. |
| Robot gets stuck or stops | Obstacle in pool; Low battery; Sensor malfunction. | Remove obstacles; Charge the robot; Contact support if sensors are suspected. |
| App connectivity issues | Bluetooth/Wi-Fi signal weak; App not updated. | Move closer to the robot; Ensure strong signal; Update the Beatbot app. |
If the problem persists after attempting these solutions, please contact Beatbot customer support.
10. Specifications
- Product Dimensions: 43.4 x 38.6 x 26.7 cm
- Product Weight: 8.9 kg
- Model Number: RCMPM021G
- Power Source: Rechargeable battery
- Battery Capacity: 10000 mAh
- Max Cleaning Area: Up to 300 m² (floor cleaning)
- Continuous Floor Cleaning Time: Up to 5 hours
- Debris Capacity: 5 L
- Standard Filtration: 150 µm
- Charging Time: Approximately 4.5 hours
11. Warranty and Support
The Beatbot Sora 30 Robotic Pool Cleaner is covered by a 2-year protection plan from the date of purchase. This warranty covers manufacturing defects and ensures reliable operation under normal use conditions.
For warranty claims, technical assistance, or any questions not covered in this manual, please contact Beatbot customer support through the official Beatbot website or your retailer.
